|
I recently purchased a Sony DRU-810A. With a great sense of expectation I popped the first DVD-R into my drive and tried to write around 4 gigs at 2.4x. Result: coaster. since the quality of media was questionable I let it pass and tried again with another. Same result. this repeated itself for the next couple of dvds. I then upgraded the firmware to 1.0d and nero to 6, 6, 0, 18. finally i was able to complete the burn. This however was not the end of my problems.
The coasters continued. For the same set of files, the writing process seemed to terminate at different points. A change in media to a more reliable brand, one that noone else with the same drive seemed to have a problem with, produced no change in results. The following is a Nero log of one such failed burn:
====== *** Nero-Burning Rom, History File *** ======
none
whatsoever
1A22-serial number removed
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:05:32 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <SONY DVD RW DRU-810A> Version: 1.0d - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-810A >Version: 1.0d - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LY9321X FWY506J 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-810A G: CDRom0
LY9321X FWY506J I: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785908kB)
Free physical memory: 462MB (473444kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.2.2006
ISO compilation
12:09:48 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:09:48 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
12:09:48 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-810A running
12:09:48 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:09:48 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:09:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2116527 (470:20.27, 4133MB)
12:09:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:09:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-810A, Media type: DVD-R
Disc Manufacturer: ENGAGE - 01
Disc Application Code: 64, Disc Physical Code: 193
12:09:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:09:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2116528 (2116528) = #2116528/470:20.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2116528 blocks [SONY DVD RW DRU-810A]
--------------------------------------------------------------
12:09:48 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4334649344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2116528 | lead-out | 1 | 0x41 | 0x00
12:09:48 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:09:48 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:09:48 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:09:48 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:09:48 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:09:48 PM #17 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
12:09:48 PM #18 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON
12:09:48 PM #19 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
12:09:48 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:16:44 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x0E 0xFB 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
12:16:44 PM #22 CDR -1135 File Writer.cpp, Line 311
Write error
12:16:44 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:16:45 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:16:45 PM #25 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 981823
12:16:45 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
HELP!
This message has been edited since posting. Last time this message was edited on 10. May 2006 @ 04:44
|
