|
|
|
Burn Process Failed / Unspecified Recorder Error (Please help diagnose)
|
|
|
nullvoid
Newbie
|
4. February 2006 @ 10:02 |
Link to this message
|
|
Hello everyone.
I am running <bold>win2k</bold> using <bold>Nero 7.0.1.4</bold>
With an <bold>NEC DVD_RW ND2500A With Firmware 1.08</bold>
Burning to <bold>Taiyo Yuden Disks (TYG03)</bold> purchased from Supermedia store
I have had about 16 coasters now about 90% of the way through a 100 pack spindle and the error is always: <bold>Burn Process Failed / Unspecified Recorder Error</bold>. The error ONLY happens at the very beginning (almost immediately after I click burn) or near the very end of the burn process.
To make sure its not a problem with resources, I turn most everything off -- P2P, no media (video/audio) plays so nothing intereferes with the burning.
I'm not sure why these errors happen. I am posting my log below. Hopefully someone will be able to analyze it, because I don't know where to start.
I previously used SONY DVDs (sorry no code) and I had the same problems.
Here is the log:
-------
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.08 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 91366U4 RA53 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : ST360020A 3.34 pnp680 Port 2 ID 1 DMA: Off
DiskPeripheral : WDC WD1000JB-00CRA1 17.0 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : WDC WD1200BB-22CAA0 16.0 pnp680 Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A H: CDRom0
Generic DVD-ROM J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392496kB)
Free physical memory: 54MB (55712kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.2.2006
Burn DVD Image
11:40:48 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 56320KB of Memory
11:40:48 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:40:48 AM #3 Text 0 File Writer.cpp, Line 113
Writer H: _NEC DVD_RW ND-2500A running
11:40:48 AM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
11:40:48 AM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1994997 (443:19.72, 3896MB)
11:40:48 AM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
11:40:48 AM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193
11:40:48 AM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:40:48 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1994998 (1994998) = #1994998/443:19.73
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1994998 blocks [H: _NEC DVD_RW ND-2500A]
--------------------------------------------------------------
11:40:48 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: _NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4085755904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1994998 | lead-out | 1 | 0x41 | 0x00
11:40:48 AM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:40:49 AM #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
11:40:49 AM #13 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
11:40:49 AM #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
11:40:49 AM #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
11:40:49 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:40:49 AM #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
11:40:49 AM #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
11:40:49 AM #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
11:40:49 AM #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:40:51 AM #21 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
H: _NEC DVD_RW ND-2500A
11:40:51 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:40:51 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:40:51 AM #24 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1
11:40:51 AM #25 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
H: _NEC DVD_RW ND-2500A
11:40:51 AM #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:40:51 AM #27 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/9/2005 10:45:48 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/9/2005 10:45:48 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 2:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\SCSIPORT.SYS': Ver=5.00.2195.7059, size=74384 bytes, created 7/14/2005 4:24:08 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
|
andmerr
Suspended permanently
|
4. February 2006 @ 10:45 |
Link to this message
|
try changing all this first.
Quote:
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 91366U4 RA53 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : ST360020A 3.34 pnp680 Port 2 ID 1 DMA: Off
DiskPeripheral : WDC WD1000JB-00CRA1 17.0 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : WDC WD1200BB-22CAA0 16.0 pnp680 Port 2 ID 1 DMA: Off
All the DMA settings need to be on.
Quote:
Physical memory : 383MB (392496kB)
Free physical memory: 54MB (55712kB)
Memory in use : 85 %
Are you sure you have everything possible turned off as you dont have enough memory to burn squat.You might consider at this point to invest in some more ram as you only have 54 meg free
|
|
nullvoid
Newbie
|
4. February 2006 @ 11:45 |
Link to this message
|
|
Thanks! I think that did it. I can't be sure only burned two disks so far. But I had assumed DMA was on. Now with it turned back on, the buffer doesn't fluctate under 100% .. it stays constantly full. And it burned a disc MUCH faster.
|
|
andmerr
Suspended permanently
|
4. February 2006 @ 11:50 |
Link to this message
|
|
no probs thats an easy fix, still think you need to invest in some more ram though as bigger projects will require more resources,
|
|
nullvoid
Newbie
|
4. February 2006 @ 12:12 |
Link to this message
|
Looks Like I spoke too soon. I got two errors again. One at the end and one at the beginning. Here's the log for the latter.
I have DMA on for the DVD drive .. but not the HDs .. I think i need to get new drivers for the HD controller. Would that matter?
I hear ya on the ram. I am running on a p3/866 -- so i'm about to buy a new machine. This one just happens to be perfect for simple browsing, instant messaging and playing back music .. not to mention burning disks.
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.08 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 91366U4 RA53 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : ST360020A 3.34 pnp680 Port 2 ID 1 DMA: Off
DiskPeripheral : WDC WD1000JB-00CRA1 17.0 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : WDC WD1200BB-22CAA0 16.0 pnp680 Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A H: CDRom0
Generic DVD-ROM J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392496kB)
Free physical memory: 171MB (175872kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.2.2006
Burn DVD Image
2:03:42 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 56320KB of Memory
2:03:42 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
2:03:42 PM #3 Text 0 File Writer.cpp, Line 113
Writer H: _NEC DVD_RW ND-2500A running
2:03:42 PM #4 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
2:03:43 PM #5 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2195877 (487:58.27, 4288MB)
2:03:43 PM #6 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
2:03:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193
2:03:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:03:43 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 2195878 (2195878) = #2195878/487:58.28
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2195878 blocks [H: _NEC DVD_RW ND-2500A]
--------------------------------------------------------------
2:03:43 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [H: _NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4497158144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2195878 | lead-out | 1 | 0x41 | 0x00
2:03:43 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:03:43 PM #12 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
2:03:43 PM #13 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
2:03:43 PM #14 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
2:03:43 PM #15 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 6x (8,310 KB/s)
2:03:43 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:03:43 PM #17 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
2:03:43 PM #18 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON
2:03:43 PM #19 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
2:03:43 PM #20 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:03:44 PM #21 CDR -1 File Writer.cpp, Line 302
Unspecified Recorder Error
H: _NEC DVD_RW ND-2500A
2:03:44 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:03:44 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:03:44 PM #24 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1
2:03:44 PM #25 CDR -1 File WriterStatus.cpp, Line 167
Unspecified Recorder Error
H: _NEC DVD_RW ND-2500A
2:03:44 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
2:03:44 PM #27 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/9/2005 10:45:48 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/9/2005 10:45:48 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 2:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\SCSIPORT.SYS': Ver=5.00.2195.7059, size=74384 bytes, created 7/14/2005 4:24:08 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
1 product review
|
4. February 2006 @ 12:39 |
Link to this message
|
Quote:
not to mention burning disks.
appearantly not...LOL
Quote:
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.08
Firmware appears to be a little behind, current version should be 1.0A and can be found here: http://forum.rpc1.org/dl_result.php?kaj=1&isces
Try this only if the other suggestions do not work.
Quote:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 12/9/2005 10:45:48 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 12/9/2005 10:45:48 PM
It also appears that you have Roxio running on your machine, which is known to cause conflicts with Nero and other burning apps. Remove Roxio via this cleantool: http://www.softpedia.com/progDownload/Roxio-Zap-Download-21600.html
EDIT:
I almost forgot about this one
Quote:
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 1 ID 0 DMA: Off
DiskPeripheral : Maxtor 91366U4 RA53 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : ST360020A 3.34 pnp680 Port 2 ID 1 DMA: Off
DiskPeripheral : WDC WD1000JB-00CRA1 17.0 pnp680 Port 2 ID 0 DMA: Off
DiskPeripheral : WDC WD1200BB-22CAA0 16.0 pnp680 Port 2 ID 1 DMA: Off
DMA needs to be on for all drives, you can fix this via alkohol's guide: http://forums.afterdawn.com/thread_view.cfm/260038
@andy
Wassup...Hear about gear?
This message has been edited since posting. Last time this message was edited on 4. February 2006 @ 12:43
|
|
andmerr
Suspended permanently
|
4. February 2006 @ 14:38 |
Link to this message
|
|
|
|
Advertisement
|
|
|
Moderator
1 product review
|
4. February 2006 @ 15:29 |
Link to this message
|
|
Yeah I've looked at that thread a couple of times, I'm trying to stay away from it. LOL
Gear has banned himself for personal reasons, but you and I both know he is tenacious and will return in due time...shame he worked so hard to become and addict and then decide to go belly up.
It probably wouldn't be such a bad idea for me to ban myself as well...LOL
|
|
