|
|
|
Nero Burning Help - Invalid Block Address
|
|
|
Joe4415
Newbie
|
5. February 2006 @ 17:27 |
Link to this message
|
|
I have tried to fix this error by reading through previous posts, but still can't fix the problem. I have never had a problem, but now I can't burn a single dvd. I haven't changed media (using Memorex 16X dvd-r, which I have never had a problem with). I also update my firmware. I have pasted the log. If anyone has any ideas on how I can fix this problem, please help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.09 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG DVD-ROM SD-616 >Version: bp06 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380013A atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A D: CDRom0
SAMSUNG DVD-ROM SD-616 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654412kB)
Free physical memory: 88MB (90488kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.2.2006
UDF/ISO compilation
6:14:13 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
6:14:13 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
6:14:13 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:14:13 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
6:14:13 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
6:14:13 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:14:13 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: PLEXTOR DVDR PX-716A running
6:14:13 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:14:13 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:14:13 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
6:14:13 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
6:14:13 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
6:14:13 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
6:14:13 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:14:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [D: PLEXTOR DVDR PX-716A]
--------------------------------------------------------------
6:14:14 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286160 | lead-out | 1 | 0x41 | 0x00
6:14:14 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:14:14 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
6:14:14 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
6:14:14 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
6:14:14 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 16x (22,160 KB/s)
6:14:14 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:14:14 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
6:14:14 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON
6:14:14 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
6:14:14 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:14:20 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
18:14:20.097 - D: PLEXTOR DVDR PX-716A : Queue again later
6:14:33 PM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x03498000: Len xc
6:14:33 PM #29 SPTI -1064 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x06640000: Len x10000
0x01 00 02 00 3F 00 00 00 5D CE F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 57 45 44 44 49 4E 47
0x5F 43 52 41 53 48 45 52 00 00 00 00 00 00 00 00
6:14:33 PM #30 CDR -1064 File Writer.cpp, Line 302
Invalid block address
D: PLEXTOR DVDR PX-716A
6:14:33 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:14:33 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:14:33 PM #33 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 31
6:14:33 PM #34 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.50 , size=24960 bytes, created 9/7/2005 1:32:58 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:09 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
5. February 2006 @ 18:14 |
Link to this message
|
Although you say you haven't had any problems with memorex, you do now. Burner doesn't like your media
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
You need to free up some memory, shut down any unnecessary progs
Quote:
Physical memory : 639MB (654412kB)
Free physical memory: 88MB (90488kB)
You are burning too fast, slow to 4X
Quote:
Burn process failed at 16x (22,160 KB/s)
Also burning too close to edge of disc, cut it back to 4300
Quote:
Last address to be written: 2286159 (508:02.09, 4465MB)
|
AfterDawn Addict
|
5. February 2006 @ 18:22 |
Link to this message
|
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
Hmmm... this is a bit too close to the edge, especially you're using crap media like CMC MAG. I don't even dare to go beyond 4440MB with top notch media like (1) Taiyo Yuden, (2) Verbatim "advanced azo or datalife plus, (3) Maxell (made in japan by Hitachi Corp.) -- you'll need to customize your size to at least 4360MB - 4400MB.
Quote:
Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
No offense here, but you're using one of the worst media ever in the market. I suggest you get some high quality media as I've mentioned above. For more info on Memosux or CMC MAG, go here http://forums.afterdawn.com/thread_view.cfm/262544 or here http://forums.afterdawn.com/thread_view.cfm/232406
Quote:
Burn process failed at 16x (22,160 KB/s)
With this kind of burning speed, you're more than likely to end up with a coaster instead of successful burned. Again, I don't even dare to go beyond 8X with top notch media like YUDEN, Verbatim and Maxell (mij by Hitachi). I recommend you slow down to 4X or 8X if you feel the need to. Tons of knowledgeable members here at AD would never dare to burn more than 4X because it's the best and safest that way.
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.50 , size=24960 bytes, created 9/7/2005 1:32:58 PM
You need to dump that Roxio program (or application). Roxio don't get along with Nero, it conflicts with Nero and therefore you're more than likely to get "coasters" down the road. Get Roxio Zapper her http://www.downloadjunction.com/product/store/15199 and run it to completely wipe Roxio from your system.
Good luck!!
|
|
Advertisement
|
|
|
|
Joe4415
Newbie
|
6. February 2006 @ 14:08 |
Link to this message
|
I followed all of the advice you two gave, and still no luck. I went and bought Verbatim DVD-Rs, removed Roxio, closed unnecessary programs, and tried burning at 4X. Here is the new log. Any other ideas? Thanks for the help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.09 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-716A >Version: 1.09 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380013A atapi Port 0 ID 0 DMA: On
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-716A D: CDRom0
SAMSUNG DVD-ROM SD-616 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 639MB (654412kB)
Free physical memory: 245MB (251304kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.2.2006
UDF/ISO compilation
7:04:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
7:04:55 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
7:04:55 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:04:55 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
7:04:55 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
7:04:55 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
7:04:55 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: PLEXTOR DVDR PX-716A running
7:04:55 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:04:55 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:04:55 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
7:04:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2164191 (480:55.66, 4226MB)
7:04:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
7:04:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
7:04:56 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:04:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2164192 (2164192) = #2164192/480:55.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2164192 blocks [D: PLEXTOR DVDR PX-716A]
--------------------------------------------------------------
7:04:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4432265216, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2164192 | lead-out | 1 | 0x41 | 0x00
7:04:56 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:04:56 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
7:04:56 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
7:04:56 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
7:04:56 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
7:04:56 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:04:56 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
7:04:56 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: BURN-Proof -> ON
7:04:56 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
7:04:56 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:04:58 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
19:04:58.892 - D: PLEXTOR DVDR PX-716A : Queue again later
7:05:20 PM #28 SPTI -1106 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x03498000: Len xc
7:05:20 PM #29 SPTI -1064 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x06c20000: Len x10000
0x01 00 02 00 98 00 00 00 BE C6 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 4D 55 52 44 45 52 5F
0x49 4E 5F 46 49 52 53 54 00 00 00 00 00 00 00 00
7:05:20 PM #30 CDR -1064 File Writer.cpp, Line 302
Invalid block address
D: PLEXTOR DVDR PX-716A
7:05:20 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:05:20 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:05:20 PM #33 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 31
7:05:20 PM #34 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:09 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
