|
|
|
Could Not Perform End Of Disc-At-Once Error
|
|
|
wolfboy78
Newbie
|
19. April 2005 @ 19:28 |
Link to this message
|
|
|
|
Advertisement
|
|
|
|
|
ccampbell
Senior Member
|
5. May 2005 @ 13:16 |
Link to this message
|
Hi Jokkerr,
Do you have the latest firmware for your model recorder? You should also upgrade to our latest Nero 6.6.0.12 if you have not already.
The log file shows an error message as soon as your recorder attempts the first write. I would normally assume this to be caused by poor DVD DL media, old firmware, or old version of our software.
Assuming of course that you do not have trouble creating data CD's and writing to normal DVDs.
Hi T1Torro,
I would need to see a log file before I can guess what your issues are. The symptoms may be the same, but the cause can be very different.
Regards,
Craig
Nero Inc
USA
|
|
carlsson
Newbie
|
19. May 2005 @ 22:35 |
Link to this message
|
Hello,
I am a newbie to the forum, and I too am having the "disc-at-once" error with Nero 6.6.0.13. Can anybody offer any advice?
My "disc-at-once" error comes during the lead-out. I sometimes have success with burning DVD's, but it is sporadic and I usually have to restart my machine and make sure Nero is the only thing running. I have defragmented my machine, and my firmware and ASPI are updated judging from what I've read on previous posts. The jumpers are cleaned out and firmly attached. I am aware that one of the hard drives appears to have DMA disabled. This is not the drive that I am using. Also, I'm using Sony media with a Sony DRU-510A burner. If anybody would mind reading my log I will appreciate it very much.
Thanks!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 9:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <SONY DVD RW DRU-510A> Version: 1.1a - HA 0 TA 0 - 6.6.0.13
Adapter driver: <IdeChnDr> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-510A >Version: 1.1a - HA 0 TA 0 - 6.6.0.13
Adapter driver: <IdeChnDr> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-510A IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00DAA3 IdeChnDr Port 1 ID 0 DMA: On
DiskPeripheral : HDS722580VLAT20 IdeChnDr Port 1 ID 1 DMA: Off
CdRomPeripheral : TEAC CD-W512SB 1.0C aic78xx Port 2 ID 3 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-510A D: CDRom1
TEAC CD-W512SB E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 202MB (206940kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.5.2005
Burn DVD Image
1:42:22 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
1:42:22 AM #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-510A running
1:42:22 AM #3 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
1:42:22 AM #4 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285998 (507:59.73, 4464MB)
1:42:22 AM #5 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
1:42:22 AM #6 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
1:42:22 AM #7 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:42:22 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285999 (2285999) = #2285999/507:59.74
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285999 blocks [SONY DVD RW DRU-510A]
--------------------------------------------------------------
1:42:22 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681725952, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285999 | lead-out | 1 | 0x41 | 0x00
1:42:23 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:42:23 AM #11 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
1:42:23 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:42:23 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
1:42:23 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:42:23 AM #15 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
1:42:23 AM #16 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Power-Burn -> ON
1:42:23 AM #17 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
1:42:23 AM #18 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:42:26 AM #19 Text 0 File Cdrdrv.cpp, Line 1288
01:42:26.463 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:43:30 AM #20 Text 0 File Cdrdrv.cpp, Line 1288
01:43:30.244 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:43:30 AM #21 Text 0 File Cdrdrv.cpp, Line 1288
01:43:30.845 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:43:30 AM #22 Text 0 File Cdrdrv.cpp, Line 1288
01:43:30.895 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:43:30 AM #23 Text 0 File Cdrdrv.cpp, Line 1288
01:43:30.945 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:43:30 AM #24 Text 0 File Cdrdrv.cpp, Line 1288
01:43:30.996 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:43:31 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
01:43:31.046 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:43:31 AM #26 Text 0 File Cdrdrv.cpp, Line 1288
01:43:31.096 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:44:07 AM #27 Text 0 File Cdrdrv.cpp, Line 1288
01:44:07.849 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:44:07 AM #28 Text 0 File Cdrdrv.cpp, Line 1288
01:44:07.909 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:44:45 AM #29 Text 0 File Cdrdrv.cpp, Line 1288
01:44:45.503 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:45:23 AM #30 Text 0 File Cdrdrv.cpp, Line 1288
01:45:23.207 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:45:23 AM #31 Text 0 File Cdrdrv.cpp, Line 1288
01:45:23.267 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:46:00 AM #32 Text 0 File Cdrdrv.cpp, Line 1288
01:46:00.881 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:46:38 AM #33 Text 0 File Cdrdrv.cpp, Line 1288
01:46:38.545 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:47:16 AM #34 Text 0 File Cdrdrv.cpp, Line 1288
01:47:16.199 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:47:16 AM #35 Text 0 File Cdrdrv.cpp, Line 1288
01:47:16.229 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:47:53 AM #36 Text 0 File Cdrdrv.cpp, Line 1288
01:47:53.854 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:48:31 AM #37 Text 0 File Cdrdrv.cpp, Line 1288
01:48:31.498 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:48:31 AM #38 Text 0 File Cdrdrv.cpp, Line 1288
01:48:31.528 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:49:09 AM #39 Text 0 File Cdrdrv.cpp, Line 1288
01:49:09.152 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:49:46 AM #40 Text 0 File Cdrdrv.cpp, Line 1288
01:49:46.846 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:50:24 AM #41 Text 0 File Cdrdrv.cpp, Line 1288
01:50:24.510 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:50:24 AM #42 Text 0 File Cdrdrv.cpp, Line 1288
01:50:24.540 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:51:02 AM #43 Text 0 File Cdrdrv.cpp, Line 1288
01:51:02.164 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:51:02 AM #44 Text 0 File Cdrdrv.cpp, Line 1288
01:51:02.204 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:51:39 AM #45 Text 0 File Cdrdrv.cpp, Line 1288
01:51:39.798 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:52:17 AM #46 Text 0 File Cdrdrv.cpp, Line 1288
01:52:17.443 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:52:17 AM #47 Text 0 File Cdrdrv.cpp, Line 1288
01:52:17.473 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:52:55 AM #48 Text 0 File Cdrdrv.cpp, Line 1288
01:52:55.077 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:53:32 AM #49 Text 0 File Cdrdrv.cpp, Line 1288
01:53:32.771 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:54:10 AM #50 Text 0 File Cdrdrv.cpp, Line 1288
01:54:10.435 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:54:48 AM #51 Text 0 File Cdrdrv.cpp, Line 1288
01:54:48.089 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:54:48 AM #52 Text 0 File Cdrdrv.cpp, Line 1288
01:54:48.129 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:55:25 AM #53 Text 0 File Cdrdrv.cpp, Line 1288
01:55:25.743 - SONY DVD RW DRU-510A\H0 T0 : Queue again later
1:57:48 AM #54 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-510A > start writing Lead-Out at LBA 2285999 (22E1AFh), lenght 0 blocks
1:57:48 AM #55 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:57:48 AM #56 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 2285983
1:59:20 AM #57 SCSI -1061 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03AA5E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x44 0x00
1:59:20 AM #58 CDR -1061 File ThreadedTransferInterface.cpp, Line 1867
Internal target failure
SONY DVD RW DRU-510A\H0 T0
1:59:20 AM #59 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
Could not perform end of Disc-at-once
1:59:20 AM #60 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was -1
1:59:20 AM #61 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
SONY DVD RW DRU-510A\H0 T0
1:59:20 AM #62 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
1:59:20 AM #63 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 10:02:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=7.00.2035, 07/26/2001, size=86330 bytes, created 9/6/2001 1:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
jokkerr
Newbie
|
25. May 2005 @ 12:23 |
Link to this message
|
Thanks for all the great advice! It still didn't work once I updated to the latest copy of Nero...but once I updated to the latest firmware for my DVD Burner...then everything worked great! Thanks for all of y'alls help! =)
|
|
ccampbell
Senior Member
|
2. June 2005 @ 11:32 |
Link to this message
|
Hi Carlsson,
Your log file shows an error message of 'Queue Again Later' which means that a write command was issued to your recorder, but it was busy, and so the command went into a Queue to await for the drive to become ready to accept commands again. But the drive never free's up and eventually it times out with this error message.
This normally indicates the drive has old firmware, trouble with the media being written too, or driver conflicts with other programs.
The fact that you mention a fresh reboot with nothing running in the background causes occasional succes, would seem to indicate you have a software driver conflict.
Do you or did you have any other Recording programs on your system? If you do, I would recommend uninstalling them, and then using the Nero Registry and Driver Clean tool to clean your system, and then reboot and see if this resolves your issues.
Nero.com/eng/Driver_Clean_Tool_and_RegistryChecker.html" class="korostus" target="_blank">http://www.Nero.com/eng/Driver_Clean_Tool_and_RegistryChecker.html
Regarsd,
Craig
Nero Inc
USA
|
|
CaptBev
Suspended due to non-functional email address
|
25. November 2005 @ 18:06 |
Link to this message
|
Hi there,
After seeing several posts on different boards about this issue, I think that the short answer that no one has posted is that Nero changed the burn size limit. Thus, your media size is too big to complete the burn. You have two easy options to make it work with your current media. Try making the burn size 4300MB in your compression program. Or you might try enabling the over burn feature in Nero.
|
|
birraj
Newbie
|
6. December 2005 @ 09:01 |
Link to this message
|
Hi,
I am a new to this form.
I have got the problem while burning DVD-R.
I have installed the Nero software which came form the DVD writter. I installed the I/o Magic DVD writter. At the end of the burn I am receiving the error " could not perform end of disc at once"
1. I updated the firmware
2. ASPI is current installed and running
3. IDE primary and the Secondary are in "DMA mode"
I am attaching the log file.
Windows 2000 5.0
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 6:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.25
Using interface version: 6.3.1.11
Installed in: C:\Program Files\Ahead\Nero\
Application: Ahead\Nero BackItUp
Recorder: <DVDRW IDE 16X> Version: A190 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD204BA atapi Port 0 ID 0 DMA: On
DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CREATIVE CD-RW RW1210E atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE 16X E: CDRom0
CREATIVE CD-RW RW1210E F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392740kB)
Free physical memory: 137MB (140356kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.12.2005
NeroAPI
3:56:38 PM #1 Text 0 File Reader.cpp, Line 126
Reader running
3:56:38 PM #2 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:56:38 PM #3 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
3:56:38 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
3:56:39 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media
3:56:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287935 (508:25.60, 4468MB)
3:56:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
3:56:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
3:56:39 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:56:39 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2287936 (2287936) = #2287936/508:25.61
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287936 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
3:56:39 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4685692928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2287936 | lead-out | 1 | 0x00 | 0x41
3:58:16 PM #12 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
3:58:16 PM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
3:58:16 PM #14 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
3:58:16 PM #15 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)
3:58:16 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:58:16 PM #17 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode for Multisession
3:58:16 PM #18 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Super Link -> ON
3:58:16 PM #19 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: No
3:58:16 PM #20 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:58:35 PM #21 Text 0 File Cdrdrv.cpp, Line 1297
15:58:35.779 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #22 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.054 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #23 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.104 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #24 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.144 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #25 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.184 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #26 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.224 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #27 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.264 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #28 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.304 - DVDRW IDE 16X\H1 T0 : Queue again later
3:58:39 PM #29 Text 0 File Cdrdrv.cpp, Line 1297
15:58:39.344 - DVDRW IDE 16X\H1 T0 : Queue again later
4:12:47 PM #30 Text 0 File WriterStatus.cpp, Line 115
<DVDRW IDE 16X > start writing Lead-Out at LBA 2287936 (22E940h), lenght 0 blocks
4:12:47 PM #31 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:12:47 PM #32 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 2287935
4:12:50 PM #33 Phase 133 File APIProgress.cpp, Line 273
Writing short lead-out
4:27:21 PM #34 SCSI -1135 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
4:27:21 PM #35 CDR -1135 File ThreadedTransferInterface.cpp, Line 1708
Write error
4:27:21 PM #36 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once
4:27:21 PM #37 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was -1
4:27:21 PM #38 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)
4:27:21 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
4:27:21 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 6/8/2005 10:35:28 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 6/8/2005 10:35:26 AM
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 7:02:46 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 9/14/2005 12:17:44 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
=========================================================
3:21:13 PM Reading source path information using [None] profile. This process may take several minutes.
3:21:14 PM Full backup operation started
3:27:20 PM Compression of file(s) started
3:56:37 PM Compression of file(s) completed successfully
3:58:16 PM Caching of files started
3:58:16 PM Caching of files completed
3:58:16 PM Burn process started at 4x (5,540 KB/s)
4:12:50 PM Writing short lead-out
4:27:21 PM Write error
4:27:21 PM Could not perform end of Disc-at-once
4:27:21 PM Burn process failed at 4x (5,540 KB/s)
4:30:54 PM Backup process failed.
****************
I would appreciat if anybody can help.
I contacted the manufaturer. They asked me to return this burner and exchange it with another one. I don't think this is problem with the burner. I think its the problem that it is taking long time burn and I think it is the software.
Anyhelp willbe appreciated.
Thanks
|
|
ccampbell
Senior Member
|
7. December 2005 @ 07:51 |
Link to this message
|
Hi Birraj,
Acutally, your problem is that you are getting a 'Queue Again Later' error message, as seen from the below excerpt from your log file. This means the Recorder is busy and not accepting any commands from Nero.
3:58:35 PM #21 Text 0 File Cdrdrv.cpp, Line 1297
15:58:35.779 - DVDRW IDE 16X\H1 T0 : Queue again later
I would recommend that you first make sure you have the latest firmware for your model recorder, and that you upgrade to the last release of Nero 6.6 using the below link.
Nero.com/nero6/enu/nero-up.php" class="korostus" target="_blank">http://www.Nero.com/nero6/enu/nero-up.php
See if this resolves your issues.
Regards,
Craig
Nero Inc
USA
|
|
birraj
Newbie
|
8. December 2005 @ 08:40 |
Link to this message
|
Hi,
Thanks for your response. I have already updated the new firmware. I tried burning DVD+R through Nero express 2 and it worked fine. I think the Nero back up has some problem. I also tried -r and it worked fine through Nero express. I also burnt a DVD -R through Nero vision it worked fine. I am also updating my verion of Nero. Let me update once I burn another DVD.
|
|
RainbowX1
Inactive
|
8. January 2006 @ 18:02 |
Link to this message
|
I've noticed a lot of people is recieving a similar problem as myself. I've tried re-installing Nero, but I always get that error. I've tried reburning many times and still end up with the error. Here is the saved log, hope you guys can help, thanks
DVD Brand : Maxell DVD+R
DVD Burner: AOPEN DUW1608/ARR 16X
Nero: Nero Version: 7.0.0.0
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <AOPEN DUW1608/ARR> Version: A04b - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B E: CDRom0
AOPEN DUW1608/ARR F: CDRom1
Generic DVD-ROM G: CDRom2
Generic DVD-ROM H: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 161MB (165308kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.1.2006
ISO compilation
10:24:06 PM #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:24:06 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory
10:24:06 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
10:24:06 PM #4 Text 0 File Writer.cpp, Line 113
Writer F: AOPEN DUW1608/ARR running
10:24:06 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
10:24:06 PM #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
10:27:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2146111 (476:54.61, 4191MB)
10:27:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
10:27:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: AOPEN DUW1608/ARR, Media type: DVD+R
10:27:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:27:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2146112 (2146112) = #2146112/476:54.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2146112 blocks [F: AOPEN DUW1608/ARR]
--------------------------------------------------------------
10:27:32 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [F: AOPEN DUW1608/ARR] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4395237376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2146112 | lead-out | 1 | 0x41 | 0x00
10:27:32 PM #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:27:32 PM #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
10:27:33 PM #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
10:27:33 PM #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
10:27:33 PM #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)
10:27:33 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:27:33 PM #19 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x038a1e00: Len x804
10:27:33 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
10:27:33 PM #21 Text 0 File DVDR.cpp, Line 6068
Drive: AOPEN DUW1608/ARR
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:27:33 PM #22 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
10:27:33 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
10:28:25 PM #24 SPTI -1106 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 73 03
Buffer x04e00000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10:28:25 PM #25 CDR -1106 File Writer.cpp, Line 302
Power calibration error
F: AOPEN DUW1608/ARR
10:28:26 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:28:26 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:28:26 PM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0E 00 00 00 00 24
10:28:26 PM #29 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x03878800: Len x6
10:28:26 PM #30 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 A1 02 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
10:28:26 PM #31 Text 0 File DVDR.cpp, Line 6068
Drive: AOPEN DUW1608/ARR
Book Type request [gen]: ?, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:28:26 PM #32 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
10:28:26 PM #33 Text 0 File DVDR.cpp, Line 6068
Drive: AOPEN DUW1608/ARR
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:28:26 PM #34 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
F: AOPEN DUW1608/ARR
10:28:26 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:28:26 PM #36 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
red0321
Newbie
|
11. January 2006 @ 04:21 |
Link to this message
|
I have the same problem. I'm using memorex DVD-R disk. I tried every thing i read in this forum but I get the same message "could not perform end of disc at once". Could it be that my dvd went bad? I burn disks before. I can read DVDs with it and play movies. It dosen't seem to write to the disk. Her is the log message.
I dont want to buy anther dvd and still have the same problem.
Thanks
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Lite-On LTN486 48x Max >Version: YD01 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD100BB-75AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Lite-On LTN486 48x Max atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-105 E: CDRom0
Lite-On LTN486 48x Max F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260328kB)
Free physical memory: 101MB (104240kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.1.2006
ISO compilation
8:39:26 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:39:27 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
8:39:27 PM #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
8:39:27 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:39:28 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:39:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1778207 (395:09.32, 3473MB)
8:39:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:39:29 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
8:39:29 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:39:29 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1778208 (1778208) = #1778208/395:9.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1778208 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
8:39:32 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3641769984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1778208 | lead-out | 1 | 0x41 | 0x00
8:39:32 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:39:40 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:39:40 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:39:40 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
8:39:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:39:40 PM #17 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
8:39:40 PM #18 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
8:39:41 PM #19 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
8:39:41 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:39:43 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
20:39:43.979 - PIONEER DVD-RW DVR-105\H1 T0 : Queue again later
8:40:46 PM #22 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03
8:40:46 PM #23 CDR -1106 File Writer.cpp, Line 311
Power calibration error
8:40:46 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:40:46 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:40:46 PM #26 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 767
8:40:46 PM #27 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
8:40:46 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04
8:40:46 PM #29 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
8:40:46 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
8:40:46 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
ccampbell
Senior Member
|
12. January 2006 @ 10:17 |
Link to this message
|
|
Hi Red0321,
Your actual error is a 'Power Calibration Error'. You must always go with the first error message that occurs in the log file. As it will cause other errors like a 'Domino effect'. If you do a search on this forum for 'Power Calibration error' you'll see a number of possible causes for this. Such as Poor media, dust on the optical head of the recorder, power fluctuations, old firmware for the recorder, or a defective recorder.
Hi Rainboxx1,
You are also getting a Power Calibration Error. And even before the writ the log file indicates that the recorder is unable to determine the MFG of the media, though it is able to determine the type. You could have a firwmare issue or poor media.
REgards,
Craig
Nero Inc
USA
|
AfterDawn Addict
|
12. January 2006 @ 12:24 |
Link to this message
|
Craig is back, long time no see, Creaky has assumed the role of Nero man, or affectionately called;
THE Nero-NATOR!!
Gif by Phantom69
 |
|
ccampbell
Senior Member
|
16. January 2006 @ 15:29 |
Link to this message
|
Sorry about the long absence. Between the Holidays, Release of Nero 7, CES Show, etc...I've been very short on time.
But in Febuary I plan on coming back strong on this and other forums. I've hired a few new people to help free up some of my time. I'm not quite ready to make a steady presence on this and other forums, but I'm close and expect to be ready come Feb.
Sorry again to those who have had many questions and issues that needed assistance on. I will do my best not to be away this long again.
Regards,
Craig
Nero Inc
USA
|
|
red0321
Newbie
|
22. January 2006 @ 20:20 |
Link to this message
|
I'm starting to think i have a bad dvd burner. I can play movies or read files that i have saved on other dvds but it dosen't want to burn any thing. Any suggestion would help. here is my last log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Lite-On LTN486 48x Max >Version: YD01 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD100BB-75AUA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Lite-On LTN486 48x Max atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
Lite-On LTN486 48x Max E: CDRom0
PIONEER DVD-RW DVR-105 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260328kB)
Free physical memory: 77MB (78932kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.1.2006
ISO compilation
10:40:19 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:40:20 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:40:20 PM #3 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running
10:40:20 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:40:21 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:40:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2089551 (464:20.51, 4081MB)
10:40:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:40:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: Yi Jha - n 001
Disc Application Code: 64, Disc Physical Code: 193
10:40:22 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:40:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2089552 (2089552) = #2089552/464:20.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2089552 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
10:40:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4279402496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2089552 | lead-out | 1 | 0x41 | 0x00
10:40:26 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:40:33 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:40:33 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:40:33 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
10:40:33 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:40:33 PM #17 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
10:40:33 PM #18 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
10:40:33 PM #19 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
10:40:33 PM #20 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:40:37 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
22:40:37.304 - PIONEER DVD-RW DVR-105\H1 T1 : Queue again later
10:43:13 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07270000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00
10:43:13 PM #23 CDR -1135 File Writer.cpp, Line 311
Write error
10:43:13 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:43:14 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:43:14 PM #26 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 767
10:43:14 PM #27 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out
10:43:14 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x04
10:43:14 PM #29 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
10:43:14 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:43:14 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.47a, size=17136 bytes, created 9/10/2003 2:46:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Is there any way i can test my burner?
THanks
|
|
ccampbell
Senior Member
|
23. January 2006 @ 16:40 |
Link to this message
|
|
I would recommend that you use a different brand of DVD media to see if this resolves your issue. And make sure you have the latest firmware for it, as the log file is indicating a problem with the Media. If that fails, then it is possible that the Recorder needs the optical head to be cleaned, or it needs service.
Regards,
Craig
Nero Inc
USA
|
|
ozzie826
Newbie
|
25. March 2006 @ 06:30 |
Link to this message
|
|
Hi All
I had the same problem but i think i found a way to solve this problem download a progame called BUG DOCTOR from ares or limewire then install it and it will search your pc for any errors and sort it out for you i had 120 errors after i downloaded SPYWARE DOCTOR and used that too and now i can copy stuff without the error message
Hope That Helps
|
|
JohnGecko
Newbie
|
18. April 2006 @ 08:15 |
Link to this message
|
It seems I have the same problem, but none of the fixes I have read so far have helped me.
Have you tried checking your basics ? Yes, I have tried several programs, about 5 different brand dvd's
Firmware ? Is upto date
ASPI ? checks fine.
Disk Defrag ? just did, and also recently reformatted and did all the upgrades for XP SP2
IDE location ? This is a laptop with only 1 dvd drive and DMA is enabled.
Jumper settings ? never touched them since bought the computer.
What type of media are you using ? Verbatim 8x DVD-R, also have on hand Memorex 8X DVD+R, have tried Sony's as well.
What programs are you using ? Nero 7.0.0.0
Exactly where are you and what are you doing when your error occurs. Trying to burn ISO files.
What are your PC's specs ? HP 7360US laptop, P4 3.4 1GB Memory, 100GB hard drive,
Do you have any Roxio products installed on your PC ? nope.
Also I tried downloading and using UltraISO and got the same Could Not Perform End Of Disc-At-Once Error.
Here is my log.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <HL-DT-ST DVDRAM GMA-4080N>Version: 0S35 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GMA-4080N>Version: 0S35 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHU2100AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4080N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GMA-4080N D: CDRom0
Generic DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 422MB (433012kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.4.2006
Burn DVD Image
11:43:59 AM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
11:43:59 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
11:43:59 AM #3 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVDRAM GMA-4080N running
11:43:59 AM #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
11:44:41 AM #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2219525 (493:13.50, 4335MB)
11:44:41 AM #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)
11:44:41 AM #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVDRAM GMA-4080N, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:44:41 AM #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R DL.)
11:44:41 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2219526 (2219526) = #2219526/493:13.51
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2219526 blocks [D: HL-DT-ST DVDRAM GMA-4080N]
--------------------------------------------------------------
11:44:41 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: HL-DT-ST DVDRAM GMA-4080N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4545589248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2219526 | lead-out | 1 | 0x41 | 0x00
11:44:41 AM #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:44:42 AM #12 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
11:44:42 AM #13 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
11:44:42 AM #14 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
11:44:42 AM #15 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11,080 KB/s)
11:44:42 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:44:42 AM #17 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
11:44:42 AM #18 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON
11:44:42 AM #19 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
11:44:42 AM #20 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ..þ...ÿ.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:45:38 AM #21 Text 0 File Cdrdrv.cpp, Line 1195
11:45:38.796 - D: HL-DT-ST DVDRAM GMA-4080N : Queue again later
11:57:44 AM #22 Text 0 File WriterStatus.cpp, Line 116
<D: HL-DT-ST DVDRAM GMA-4080N> start writing Lead-Out at LBA 2219526 (21DE06h), length 0 blocks
11:57:44 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:57:44 AM #24 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 2219519
11:57:56 AM #25 SPTI -1093 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 3C 30 00 0C 02
Buffer x0383ac00: Len x20
11:57:56 AM #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1921
No seek complete
D: HL-DT-ST DVDRAM GMA-4080N
11:57:56 AM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1921
Could not perform end of Disc-at-once
11:57:56 AM #28 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1
11:57:57 AM #29 CDR -201 File WriterStatus.cpp, Line 167
Invalid write state
D: HL-DT-ST DVDRAM GMA-4080N
11:57:57 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
11:57:57 AM #31 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
DePhille
Newbie
|
21. July 2006 @ 03:37 |
Link to this message
|
Make sure there aren'tany emuilated drivers (IE: Nero and Alchohol 12%).
That helped for me!
Grtz, Dephille
|
|
fexter
Newbie
|
24. September 2006 @ 17:41 |
Link to this message
|
Can anyone help me with this error... here is my log file....
Thanks!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <Memorex DVD+R/RW 2.4x8AA>Version: 1.72 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LG CD-ROM CRD-8521B>Version: 1.03 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : Memorex DVD+R/RW 2.4x8AA atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LG CD-ROM CRD-8521B atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
Memorex DVD+R/RW 2.4x8AA E: CDRom0
LG CD-ROM CRD-8521B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 383MB (392688kB)
Free physical memory: 100MB (102828kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.9.2006
UDF/ISO compilation
9:01:17 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
9:01:17 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
9:01:17 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
9:01:17 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
9:01:17 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 56320KB of Memory
9:01:17 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
9:01:17 PM #7 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+R/RW 2.4x8AA running
9:01:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:01:17 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:01:17 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
9:01:18 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
9:01:18 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
9:01:18 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: Memorex DVD+R/RW 2.4x8AA, Media type: DVD+R
9:01:18 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:01:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [Memorex DVD+R/RW 2.4x8AA]
--------------------------------------------------------------
9:01:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Memorex DVD+R/RW 2.4x8AA] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286144 | lead-out | 1 | 0x41 | 0x00
9:01:18 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:01:18 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:01:18 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
9:01:18 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
9:01:18 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
9:01:18 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3,324 KB/s)
9:01:18 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:01:18 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x04c10600: Len x804
9:01:18 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
9:01:18 PM #26 Text 0 File DVDR.cpp, Line 6328
Drive: Memorex DVD+R/RW 2.4x8AA
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
9:01:18 PM #27 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: DVD-ROM
9:01:18 PM #28 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
9:01:49 PM #29 SPTI -1046 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
Buffer x04660000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9:01:49 PM #30 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: Memorex DVD+R/RW 2.4x8AA
9:01:49 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:01:49 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:01:50 PM #33 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
9:01:50 PM #34 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders
9:01:50 PM #35 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
9:01:50 PM #36 Text 0 File DVDR.cpp, Line 6328
Drive: Memorex DVD+R/RW 2.4x8AA
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
9:01:50 PM #37 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
E: Memorex DVD+R/RW 2.4x8AA
9:01:50 PM #38 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
9:01:50 PM #39 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
brithnoth
Suspended due to non-functional email address
|
19. November 2006 @ 09:23 |
Link to this message
|
Me too, Could not perform end of Disc-at-once
Please help:
] NeroVision Log created (Date: 11/19/2006)
[18:31:05] NeroVision Processors: 1 (Intel)
[18:31:05] NeroVision OS: Windows XP
[18:31:07] GCCore Detected DirectX Version: 9.0c
[18:31:10] ExpressUI Running Nero Vision Version: 4.1.0.4
[18:31:11] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
[18:31:11] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
[18:31:11] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:11] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:11] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:11] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:30] MMTools SourceBuilder: building c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi audio/0
[18:31:30] MMTools SourceBuilder: --- used source filters ---
[18:31:30] MMTools {E436EBB5-524F-11CE-9F53-0020AF0BA770} - File Source (Async.)
[18:31:30] MMTools {1B544C20-FD0B-11CE-8C63-00AA0044B51E} - AVI Splitter
[18:31:30] MMTools {6A08CF80-0E18-11CF-A24D-0020AFD79767} - ACM Wrapper
[18:31:30] MMTools SourceBuilder: file type AVI - audio
[18:31:30] MMTools --------------------
[18:31:30] MMTools SourceBuilder: building c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
[18:31:31] MMTools SourceBuilder: --- used source filters ---
[18:31:31] MMTools {E436EBB5-524F-11CE-9F53-0020AF0BA770} - File Source (Async.)
[18:31:31] MMTools {1B544C20-FD0B-11CE-8C63-00AA0044B51E} - AVI Splitter
[18:31:31] MMTools {CF49D4E0-1115-11CE-B03A-0020AF0BA770} - AVI Decompressor
[18:31:31] MMTools {1643E180-90F5-11CE-97D5-00AA0055595A} - Color Space Converter
[18:31:31] MMTools SourceBuilder: file type AVI - video
[18:31:31] MMTools --------------------
[18:31:31] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
[18:31:31] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
[18:31:31] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:31] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:31] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:31] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:32] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
[18:31:38] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
[18:31:38] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
[18:31:38] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:38] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:38] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:38] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:42] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
[18:31:42] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
[18:31:42] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:42] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:42] DVDEngine BEGIN: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:42] DVDEngine END: IDVDVideoSessionImpl - ~IDVDVideoSessionImpl
[18:31:48] ExpressUI Burn process started by user.
[18:31:48] ExpressUI Destination: RICOH DVD+RW MP5125
[18:31:48] ExpressUI Directory for temporary files: C:\DOCUME~1\JEFFAN~1\LOCALS~1\Temp
[18:31:48] ExpressUI Available hard disk space for temporary files: 1251.594 MB
[18:31:48] ExpressUI ------<Nero Vision Project Information>--------
[18:31:48] ExpressUI --- Project type: DVD-Video
[18:31:48] ExpressUI --- Project video options ---
[18:31:48] ExpressUI Video mode: PAL
[18:31:48] <---MT---> Aspect ratio: Automatic
[18:31:48] <---MT---> Quality: Automatic
[18:31:48] <---MT---> Resolution: Automatic
[18:31:48] <---MT---> Sample format: Automatic
[18:31:48] <---MT---> File type: MPEG-2
[18:31:48] <---MT---> Audio format: Automatic
[18:31:48] <---MT---> Encoding mode: Fast Encoding (1-Pass)
[18:31:48] <---MT---> Nero SmartEncoding: Automatic
[18:31:48] ExpressUI --- Project space information ---
[18:31:48] ExpressUI Media type: DVD ( bytes maximum capacity)
[18:31:48] <---MT---> Total space used: 0.00 out of 4.38 GB
[18:31:48] <---MT---> Space used for menus: 0.4 out of 1024.0 MB
[18:31:48] ExpressUI --- Project contents ---
[18:31:48] ExpressUI Sample format: Automatic
[18:31:48] <---MT---> Audio format: Automatic
[18:31:48] <---MT---> Encoding mode: Fast Encoding (1-Pass)
[18:31:48] <---MT---> Number of titles: 1
[18:31:48] <---MT---> 1. clock (Video Title, 0h 00m 12s)
[18:31:48] <---MT---> Video mode: PAL
[18:31:48] <---MT---> Aspect ratio: 4:3
[18:31:48] <---MT---> Quality: Super long play (1691 kbps)
[18:31:48] <---MT---> Resolution: 352 x 576 (Half D1)
[18:31:48] <---MT---> Audio SmartEncoding ratio: 0.0 %
[18:31:48] <---MT---> Video SmartEncoding ratio: 0.0 %
[18:31:48] <---MT---> Number of menus: 1
[18:31:48] <---MT---> - Main menu (1 page)
[18:31:48] ExpressUI --------<End of Project Information>----------
[18:31:48] ExpressUI ------Recording Parameters------
[18:31:48] ExpressUI Book Type: 1
[18:31:48] ExpressUI Destination Device: RICOH DVD+RW MP5125 (Capabilities: 000AE017)
[18:31:48] ExpressUI Recording Flags: 12
[18:31:48] ExpressUI Recording Speed: 0
[18:31:48] ExpressUI Volume Name: Clock
[18:31:48] ExpressUI Burn-at-once flag: 0
[18:31:48] ExpressUI Fast Update allowed: 0
[18:31:48] ExpressUI --End of recording parameters---
[18:31:49] DVDEngine C:\PROGRAM FILES\NERO\NERO 7\NERO VISION\DVDENGINE.DLL
[18:31:49] DVDEngine Product Version: 4.1.0.1, File Version: 4.1.0.5, Interface Version: 4.1.0.1
[18:31:49] DVDEngine BEGIN: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:49] DVDEngine END: IDVDEngineManagerImpl - CreateDVDVideoSession
[18:31:49] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterApplicationService
[18:31:49] DVDEngine ..Application service registered...
[18:31:49] DVDEngine END: IDVDSessionBaseImpl - RegisterApplicationService
[18:31:49] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterCallback
[18:31:49] DVDEngine ..Session callback registered...
[18:31:49] DVDEngine END: IDVDSessionBaseImpl - RegisterCallback
[18:31:49] DVDEngine BEGIN: IDVDVideoSessionImpl - Prepare
[18:31:49] DVDEngine **BEGIN: _DVDVideo - Prepare
[18:31:49] DVDEngine ..VTS_Ns=1...
[18:31:49] DVDEngine ****BEGIN: _DVDVideoBase - Prepare VMG
[18:31:49] DVDEngine ...VMGM_VOBS_exist = true
[18:31:49] DVDEngine ******BEGIN: VMGM_VOBS - Process Create
[18:31:49] DVDEngine ********BEGIN: _VOBS - Process VOB
[18:31:49] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
[18:31:49] DVDEngine ...Duration 400000
[18:31:49] DVDEngine ..._streamtime_frame_duration is 400000
[18:31:49] DVDEngine ...This is a still stream
[18:31:49] DVDEngine ...Stream 0 is 'Video'
[18:31:49] DVDEngine ...Stream 1 is 'System/Stream'
[18:31:49] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
[18:31:49] NeroVision Analyze video stream
[18:31:49] NeroVision Seg. | frames | weight | volume
[18:31:49] NeroVision ------+---------+--------+--------
[18:31:49] NeroVision 0 | 1 | 1 | 1
[18:31:49] NeroVision ------+---------+--------+--------
[18:31:49] NeroVision total : 1
[18:31:49] NeroVision Estimate Size
[18:31:49] NeroVision +-------+------+--------+----------+---------
[18:31:49] NeroVision |Stream | Seg. | UnComp.| Duration | Size (KB)
[18:31:49] NeroVision +-------+------+--------+----------+---------
[18:31:49] NeroVision | 0 | 0 | 1 | 0.04 | 150
[18:31:49] NeroVision | 1 | 0 | 0 | 0.04 | 0
[18:31:49] NeroVision +-------+------+--------+----------+---------
[18:31:49] NeroVision total data size : 382977 bytes
[18:31:49] NeroVision multiplexed size : 397312 bytes
[18:31:49] DVDEngine ********END: _VOBS - Process VOB
[18:31:49] DVDEngine ******END: VMGM_VOBS - Process Create
[18:31:49] DVDEngine ****END: _DVDVideoBase - Prepare VMG
[18:31:49] DVDEngine ****BEGIN: _DVDVideoBase - Prepare VTS#1
[18:31:49] DVDEngine ...VTSM_VOBS_exist = false
[18:31:49] DVDEngine ******BEGIN: VTSTT_VOBS#1 - Process Create
[18:31:49] DVDEngine ********BEGIN: _VOBS - Process VOB
[18:31:49] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
[18:31:49] DVDEngine ...Duration 120000000
[18:31:49] DVDEngine ..._streamtime_frame_duration is 400000
[18:31:49] DVDEngine ...Stream 0 is 'Video'
[18:31:49] DVDEngine ...Stream 1 is 'Audio'
[18:31:49] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
[18:31:49] NeroVision Analyze video stream
[18:31:49] NeroVision Seg. | frames | weight | volume
[18:31:49] NeroVision ------+---------+--------+--------
[18:31:49] NeroVision 0 | 300 | 1 | 300
[18:31:49] NeroVision ------+---------+--------+--------
[18:31:49] NeroVision total : 300
[18:31:49] NeroVision Estimate Size
[18:31:49] NeroVision +-------+------+--------+----------+---------
[18:31:49] NeroVision |Stream | Seg. | UnComp.| Duration | Size (KB)
[18:31:49] NeroVision +-------+------+--------+----------+---------
[18:31:49] NeroVision | 0 | 0 | 1 | 12.00 | 2701
[18:31:49] NeroVision | 1 | 0 | 1 | 12.00 | 288
[18:31:49] NeroVision +-------+------+--------+----------+---------
[18:31:49] NeroVision total data size : 3290164 bytes
[18:31:49] NeroVision multiplexed size : 3473408 bytes
[18:31:49] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
[18:31:51] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi audio/0
[18:31:51] DVDEngine ********END: _VOBS - Process VOB
[18:31:51] DVDEngine ******END: VTSTT_VOBS#1 - Process Create
[18:31:51] DVDEngine ****END: _DVDVideoBase - Prepare VTS#1
[18:31:51] DVDEngine **END: _DVDVideo - Prepare
[18:31:51] DVDEngine ..Estimated size=3.77 MB
[18:31:51] DVDEngine ..Estimated duration=15 sec
[18:31:51] DVDEngine END: IDVDVideoSessionImpl - Prepare
[18:31:51] DVDEngine BEGIN: IDVDVideoSessionImpl - CreateVOBs
[18:31:51] DVDEngine **BEGIN: _DVDVideo - Create
[18:31:51] DVDEngine ****BEGIN: Create - VMGM_VOBS
[18:31:51] DVDEngine ******BEGIN: VMGM_VOBS - Process Create
[18:31:51] DVDEngine ********BEGIN: _VOBS - Process VOB
[18:31:51] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
[18:31:51] DVDEngine ...Duration 400000
[18:31:51] DVDEngine ..._streamtime_frame_duration is 400000
[18:31:51] DVDEngine ...This is a still stream
[18:31:51] DVDEngine ...Stream 0 is 'Video'
[18:31:51] DVDEngine ...Stream 1 is 'System/Stream'
[18:31:51] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
[18:31:51] NeroVision Analyze video stream
[18:31:51] NeroVision Seg. | frames | weight | volume
[18:31:51] NeroVision ------+---------+--------+--------
[18:31:51] NeroVision 0 | 1 | 1 | 1
[18:31:51] NeroVision ------+---------+--------+--------
[18:31:51] NeroVision total : 1
[18:31:51] DVDEngine **********BEGIN: IDVDEngineManagerImpl - CreateSubpictureSource
[18:31:51] DVDEngine **********END: IDVDEngineManagerImpl - CreateSubpictureSource
[18:31:51] DVDEngine **********BEGIN: CSPU::Process()
[18:31:51] DVDEngine ...'Decoding SubPicture No.' is '0'
[18:31:51] DVDEngine ..._nLines == 576
[18:31:51] DVDEngine ...Found 'bottom half' in the bottom field at bit 7368, addr. is 921 (289)
[18:31:51] DVDEngine ...Detected 'top half' at 1, addr. is 2
[18:31:51] DVDEngine ...Detected 'bottom half' at 1, addr. is 921
[18:31:51] DVDEngine ...Lines processed: 576
[18:31:51] DVDEngine ...processed 1 packs
[18:31:51] DVDEngine **********END: CSPU::Process()
[18:31:52] DVDEngine ...New VOB 1
[18:31:52] DVDEngine ..+VOB#1: VOB_IDN=1, SA=0, VOB_V_S_PTM=35465
[18:31:52] DVDEngine ...New CELL 1
[18:31:52] DVDEngine ....+Cell#1: C_IDN=1
[18:31:52] DVDEngine BTNGR1_DSP_TY == 17446446
[18:31:52] DVDEngine ....|Cell#1: C_IDN=1, [0;65], VOBU_Ns=1, C_PBTM=0s.10
[18:31:52] DVDEngine ..|VOB#1: VOB_IDN=1, [0;65], C_Ns=1, VOB_V_S_PTM=35465, VOB_V_E_PTM=71465
[18:31:52] DVDEngine ********END: _VOBS - Process VOB
[18:31:52] DVDEngine ********BEGIN: VMGM_VOBS - INFORMATION after Create
[18:31:52] DVDEngine ----------------------------------------------------------------------------------------
[18:31:52] DVDEngine General information:
[18:31:52] DVDEngine ..size=66 (132 KB)
[18:31:52] DVDEngine ..capacity=66 (132 KB)
[18:31:52] DVDEngine ..max_capacity=524287 (1.00 GB)
[18:31:52] DVDEngine ..VOB_Ns=1
[18:31:52] DVDEngine ..C_Ns=1
[18:31:52] DVDEngine ..VOBU_Ns=1
[18:31:52] DVDEngine VOB information:
[18:31:52] DVDEngine ...VOB#1: VOB_IDN=1, [0;65], C_Ns=1, VOB_V_S_PTM=35465, VOB_V_E_PTM=71465
[18:31:52] DVDEngine .....Cell#1: C_IDN=1, [0;65], VOBU_Ns=1, C_PBTM=0s.10
[18:31:52] DVDEngine ----------------------------------------------------------------------------------------
[18:31:52] DVDEngine ********END: VMGM_VOBS - INFORMATION after Create
[18:31:52] DVDEngine ******END: VMGM_VOBS - Process Create
[18:31:52] DVDEngine ******BEGIN: VMGM_VOBS - Verify
[18:31:52] DVDEngine ******END: VMGM_VOBS - Verify
[18:31:52] DVDEngine ..VMGM_VOBS: size=132 KB (135,168 bytes)
[18:31:52] DVDEngine ****END: Create - VMGM_VOBS
[18:31:52] DVDEngine ****BEGIN: Create - VTSTT_VOBS#1
[18:31:52] DVDEngine ******BEGIN: VTSTT_VOBS#1 - Process Create
[18:31:52] DVDEngine ********BEGIN: _VOBS - Process VOB
[18:31:52] DVDEngine **********BEGIN: _VOBS - _M_analyze_cnv_input
[18:31:52] DVDEngine ...Duration 120000000
[18:31:52] DVDEngine ..._streamtime_frame_duration is 400000
[18:31:52] DVDEngine ...Stream 0 is 'Video'
[18:31:52] DVDEngine ...Stream 1 is 'Audio'
[18:31:52] DVDEngine **********END: _VOBS - _M_analyze_cnv_input
[18:31:52] NeroVision Analyze video stream
[18:31:52] NeroVision Seg. | frames | weight | volume
[18:31:52] NeroVision ------+---------+--------+--------
[18:31:52] NeroVision 0 | 300 | 1 | 300
[18:31:52] NeroVision ------+---------+--------+--------
[18:31:52] NeroVision total : 300
[18:31:52] NeroVision Set Preview Channel
[18:31:52] NeroVision Set Preview Channel
[18:31:52] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi video/0
[18:31:53] MMTools SourceBuilder: building cached c:\Documents and Settings\Jeff Andrews\My Documents\clock.avi audio/0
[18:31:53] DVDEngine ...New VOB 1
[18:31:53] DVDEngine ..+VOB#1: VOB_IDN=1, SA=0, VOB_V_S_PTM=27709
[18:31:53] DVDEngine ...New CELL 1
[18:31:53] DVDEngine ....+Cell#1: C_IDN=1
[18:32:04] DVDEngine ....|Cell#1: C_IDN=1, [0;1271], VOBU_Ns=20, C_PBTM=12s.00
[18:32:04] DVDEngine ..|VOB#1: VOB_IDN=1, [0;1271], C_Ns=1, VOB_V_S_PTM=27709, VOB_V_E_PTM=1107709
[18:32:05] DVDEngine ********END: _VOBS - Process VOB
[18:32:05] DVDEngine ********BEGIN: VTSTT_VOBS#1 - INFORMATION after Create
[18:32:05] DVDEngine ----------------------------------------------------------------------------------------
[18:32:05] DVDEngine General information:
[18:32:05] DVDEngine ..size=1272 (2.48 MB)
[18:32:05] DVDEngine ..capacity=1272 (2.48 MB)
[18:32:05] DVDEngine ..VOB_Ns=1
[18:32:05] DVDEngine ..C_Ns=1
[18:32:05] DVDEngine ..VOBU_Ns=20
[18:32:05] DVDEngine VOB information:
[18:32:05] DVDEngine ...VOB#1: VOB_IDN=1, [0;1271], C_Ns=1, VOB_V_S_PTM=27709, VOB_V_E_PTM=1107709
[18:32:05] DVDEngine .....Cell#1: C_IDN=1, [0;1271], VOBU_Ns=20, C_PBTM=12s.00
[18:32:05] DVDEngine ----------------------------------------------------------------------------------------
[18:32:05] DVDEngine ********END: VTSTT_VOBS#1 - INFORMATION after Create
[18:32:05] DVDEngine ******END: VTSTT_VOBS#1 - Process Create
[18:32:05] DVDEngine ******BEGIN: VTSTT_VOBS#1 - Verify
[18:32:05] DVDEngine ******END: VTSTT_VOBS#1 - Verify
[18:32:05] DVDEngine ..VTSTT_VOBS: size=2.48 MB (2,605,056 bytes)
[18:32:05] DVDEngine ****END: Create - VTSTT_VOBS#1
[18:32:05] DVDEngine **END: _DVDVideo - Create
[18:32:05] DVDEngine END: IDVDVideoSessionImpl - CreateVOBs
[18:32:05] DVDEngine BEGIN: IDVDVideoSessionImpl - CreateDesc
[18:32:05] DVDEngine **BEGIN: _DVDVideo - Create
[18:32:05] DVDEngine ****BEGIN: Create - VTSI#1
[18:32:05] DVDEngine ******BEGIN: VTSI#1 - Create
[18:32:05] DVDEngine ...VTSM_VOBS exists = false
[18:32:05] DVDEngine ...VTSM_PGCI_UT exists = true
[18:32:05] DVDEngine ...VTS_TMAPT exists = true
[18:32:05] DVDEngine ...VTSI_MAT created...
[18:32:05] DVDEngine ...VTS_PTT_SRPT created...
[18:32:05] DVDEngine ...VTS_PGCIT created...
[18:32:05] DVDEngine ...VTS_C_ADT created...
[18:32:05] DVDEngine ...VTS_VOBU_ADMAP created...
[18:32:05] DVDEngine ...VTSM_PGCI_UT created...
[18:32:05] DVDEngine ...VTS_TMAPT created...
[18:32:05] DVDEngine ******END: VTSI#1 - Create
[18:32:05] DVDEngine ******BEGIN: VTSI#1 - Verify
[18:32:05] DVDEngine ******END: VTSI#1 - Verify
[18:32:05] DVDEngine ..VTSI: size=14.0 KB (14,336 bytes)
[18:32:05] DVDEngine ****END: Create - VTSI#1
[18:32:05] DVDEngine ****BEGIN: Create - VMGI
[18:32:05] DVDEngine ******BEGIN: VMGI - Create
[18:32:05] DVDEngine ...VMGM_VOBS exists = true
[18:32:05] DVDEngine ...VMGM_PGCI_UT exists = true
[18:32:05] DVDEngine ...PTL_MAIT exists = false
[18:32:05] DVDEngine ...TXTDT_MG exists = false
[18:32:05] DVDEngine ...FP_PGC_exist = true...
[18:32:05] DVDEngine ...FP_PGC2_exist = false...
[18:32:05] DVDEngine ...VMGI_MAT created...
[18:32:05] DVDEngine ...TT_SRPT created...
[18:32:05] DVDEngine ...VTS_ATRT created...
[18:32:05] DVDEngine ...VMGM_PGCI_UT created...
[18:32:05] DVDEngine ...VMGM_C_ADT created...
[18:32:05] DVDEngine ...VMGM_VOBU_ADMAP created...
[18:32:05] DVDEngine ******END: VMGI - Create
[18:32:05] DVDEngine ******BEGIN: VMGI - Verify
[18:32:05] DVDEngine ******END: VMGI - Verify
[18:32:05] DVDEngine ..VMGI: size=12.0 KB (12,288 bytes)
[18:32:05] DVDEngine ****END: Create - VMGI
[18:32:05] DVDEngine **END: _DVDVideo - Create
[18:32:05] DVDEngine END: IDVDVideoSessionImpl - CreateDesc
[18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - GetDiscCaps
[18:32:05] DVDEngine ..Caps=DSCCAP_VLMNM_UDF | DSCCAP_VLMNM_ISO9660
[18:32:05] DVDEngine END: IDVDSessionBaseImpl - GetDiscCaps
[18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - SetLabel
[18:32:05] DVDEngine Volume name (ISO9660)="C____"
[18:32:05] DVDEngine END: IDVDSessionBaseImpl - SetLabel
[18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - SetLabel
[18:32:05] DVDEngine Volume name (UDF)="Clock"
[18:32:05] DVDEngine END: IDVDSessionBaseImpl - SetLabel
[18:32:05] DVDEngine BEGIN: IDVDVideoSessionImpl - GetDiscContent
[18:32:05] DVDEngine **BEGIN: _DVDVideo - Fill FileSystemDescContainer
[18:32:05] DVDEngine ..File: 'VIDEO_TS\VIDEO_TS.IFO' (VMGI), location={undefined}, size=12.0 KB (12,288 bytes)
[18:32:05] DVDEngine ..File: 'VIDEO_TS\VIDEO_TS.VOB' (VMGM_VOBS), location={undefined}, size=132 KB (135,168 bytes)
[18:32:05] DVDEngine ..File: 'VIDEO_TS\VIDEO_TS.BUP' (VMGI), location={undefined}, size=12.0 KB (12,288 bytes)
[18:32:05] DVDEngine ..File: 'VIDEO_TS\VTS_01_0.IFO' (VTSI), location={undefined}, size=14.0 KB (14,336 bytes)
[18:32:05] DVDEngine ..File: 'VIDEO_TS\VTS_01_1.VOB' (VTSTT_VOBS), location={undefined}, size=2.48 MB (2,605,056 bytes)
[18:32:05] DVDEngine ..File: 'VIDEO_TS\VTS_01_0.BUP' (VTSI), location={undefined}, size=14.0 KB (14,336 bytes)
[18:32:05] DVDEngine **END: _DVDVideo - Fill FileSystemDescContainer
[18:32:05] DVDEngine END: IDVDVideoSessionImpl - GetDiscContent
[18:32:05] DVDEngine BEGIN: IDVDSessionBaseImpl - RegisterCallback
[18:32:05] DVDEngine ..Session callback unregistered...
[18:32:05] DVDEngine END: IDVDSessionBaseImpl - RegisterCallback
[18:32:05] NeroVision DVD-Video files sorted
[18:32:36] NeroVision Caching of files started
[18:32:36] NeroVision Caching of files completed
[18:32:36] NeroVision Burn process started at 2.4x (3,324 KB/s)
[18:32:36] NeroVision Book Type automatically set to: DVD-ROM
[18:32:36] DVDEngine BEGIN: VMGM_VOBS - Write
[18:32:36] DVDEngine ...RBP=0, count=135,168 bytes
[18:32:36] DVDEngine ...succeeded
[18:32:36] DVDEngine END: VMGM_VOBS - Write
[18:32:36] DVDEngine BEGIN: VTSTT_VOBS#1 - Write
[18:32:36] DVDEngine ...RBP=0, count=2,605,056 bytes
[18:32:36] DVDEngine ...succeeded
[18:32:36] DVDEngine END: VTSTT_VOBS#1 - Write
[18:32:50] NeroVision Illegal disc
[18:32:50] <---MT---> E: RICOH DVD+RW MP5125
[18:32:50] NeroVision Generating DVD high compatibility borders
[18:32:50] NeroVision Invalid field in command
[18:32:50] <---MT---> E: RICOH DVD+RW MP5125
[18:32:50] NeroVision Could not perform end of Disc-at-once
[18:32:50] NeroVision Burn process failed at 2.4x (3,324 KB/s)
[18:32:54] NeroVision Process information:
[18:32:54] <---MT---> --------------------
[18:32:54] <---MT---> Address Version Module name
[18:32:54] <---MT---> -----------------------------------------------------
[18:32:54] <---MT---> 0x00330000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCLib.dll
[18:32:54] <---MT---> 0x003D0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GDIPainter.dll
[18:32:54] <---MT---> 0x003F0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCDOM.dll
[18:32:54] <---MT---> 0x00400000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\NeroVision.exe
[18:32:54] <---MT---> 0x00460000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCCore.dll
[18:32:54] <---MT---> 0x00500000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCDocBase.dll
[18:32:54] <---MT---> 0x00730000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\MMTools.dll
[18:32:54] <---MT---> 0x007C0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCLib.dll
[18:32:54] <---MT---> 0x007E0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\AMCUIBase.dll
[18:32:54] <---MT---> 0x012B0000 7.0.46.0 C:\WINDOWS\System32\ImagXpr7.dll
[18:32:54] <---MT---> 0x01330000 7.0.46.0 C:\WINDOWS\System32\ImagX7.dll
[18:32:54] <---MT---> 0x01510000 7.0.476.0 C:\WINDOWS\System32\ImagXR7.dll
[18:32:54] <---MT---> 0x015E0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCFX.DLL
[18:32:54] <---MT---> 0x01980000 1.1.0.865 C:\Program Files\Nero\Nero 7\Nero Vision\NeVideoFX.dll
[18:32:54] <---MT---> 0x01BF0000 1.0.0.3 C:\Program Files\Nero\Nero 7\Nero Vision\NeVideoFX.bitmaps
[18:32:54] <---MT---> 0x023B0000 2.0.1.3030 C:\Program Files\Common Files\Ahead\lib\AdvrCntr2.dll
[18:32:54] <---MT---> 0x02720000 1.0.0.3 C:\Program Files\Common Files\Ahead\lib\ShellManager.dll
[18:32:54] <---MT---> 0x028D0000 5.3.1.904 C:\WINDOWS\System32\dxdiagn.dll
[18:32:54] <---MT---> 0x02F90000 3.9.0.17 C:\Program Files\Common Files\Ahead\lib\GCHW.dll
[18:32:54] <---MT---> 0x03680000 6.5.1.902 C:\WINDOWS\System32\devenum.dll
[18:32:54] <---MT---> 0x036B0000 6.5.1.900 C:\WINDOWS\System32\msdmo.dll
[18:32:54] <---MT---> 0x03910000 2.0.2.14 C:\Program Files\Nero\Nero 7\Core\NeRSDB.dll
[18:32:54] <---MT---> 0x03930000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\NeroAPI.dll
[18:32:54] <---MT---> 0x04530000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\CDCopy.dll
[18:32:54] <---MT---> 0x04660000 1.0.0.18 C:\Program Files\Common Files\Ahead\lib\DriveLocker.dll
[18:32:54] <---MT---> 0x047B0000 0.0.0.0 C:\WINDOWS\SnoopFreeDll.dll
[18:32:54] <---MT---> 0x04CD0000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCHWCfg.dll
[18:32:54] <---MT---> 0x04D10000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCLocale.dll
[18:32:54] <---MT---> 0x04D20000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\ExpressDoc.dll
[18:32:54] <---MT---> 0x05000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\CDROM.DLL
[18:32:54] <---MT---> 0x05040000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\ExpressUI.dll
[18:32:54] <---MT---> 0x05950000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\DVDUI.dll
[18:32:54] <---MT---> 0x05980000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\DVDDoc.dll
[18:32:54] <---MT---> 0x05C50000 3.0.0.0 C:\Program Files\Trust\305KS\Mouse\MOUDL32A.DLL
[18:32:54] <---MT---> 0x05F10000 1.0.1.2 C:\Program Files\Common Files\Ahead\lib\NeroFileDialog.dll
[18:32:54] <---MT---> 0x060B0000 7.10.3077.0 C:\Program Files\Common Files\Ahead\lib\MFC71U.DLL
[18:32:54] <---MT---> 0x061C0000 7.30.0.0 C:\Program Files\Common Files\Ahead\lib\BCGCBPRO730u.dll
[18:32:54] <---MT---> 0x06730000 1.0.1.2 C:\Program Files\Common Files\Ahead\lib\MediaLibraryNSE.dll
[18:32:54] <---MT---> 0x067B0000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMDataServices.dll
[18:32:54] <---MT---> 0x06C90000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMPluginBase.dll
[18:32:54] <---MT---> 0x06CB0000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMCoFoundation.dll
[18:32:54] <---MT---> 0x06D30000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMVDS.dll
[18:32:54] <---MT---> 0x06D80000 1.4.2.0 C:\WINDOWS\System32\btwpimif.dll
[18:32:54] <---MT---> 0x06D90000 1.4.2.0 C:\WINDOWS\System32\btosif.dll
[18:32:54] <---MT---> 0x06DB0000 2.0.39.0 C:\WINDOWS\System32\CSH.dll
[18:32:54] <---MT---> 0x06E10000 1.4.2.0 C:\WINDOWS\System32\btneighborhood.dll
[18:32:54] <---MT---> 0x06EE0000 0.0.0.0 D:\p900\Mobile\auexpext.dll
[18:32:54] <---MT---> 0x06F40000 0.0.0.0 D:\p900\Mobile\FilGuiLg.dll
[18:32:54] <---MT---> 0x06F70000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMIndexStoreSvrPS.dll
[18:32:54] <---MT---> 0x06FA0000 1.4.2.0 C:\WINDOWS\System32\wbtapi.dll
[18:32:54] <---MT---> 0x070A0000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMLogCxx.dll
[18:32:54] <---MT---> 0x070D0000 10.0.0.3646 C:\WINDOWS\System32\WMASF.DLL
[18:32:54] <---MT---> 0x07110000 1.4.2.0 C:\WINDOWS\System32\btrez.dll
[18:32:54] <---MT---> 0x075C0000 1.0.1.2 C:\Program Files\Common Files\Ahead\lib\NeroSearch.dll
[18:32:54] <---MT---> 0x07A50000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMSearch.dll
[18:32:54] <---MT---> 0x07A90000 1.0.0.0 C:\Program Files\Common Files\Ahead\lib\log4cxx.dll
[18:32:54] <---MT---> 0x07B50000 1.0.1.5 C:\Program Files\Common Files\Ahead\lib\NMSearchPluginMediaLibrary.dll
[18:32:54] <---MT---> 0x07BF0000 1.1.0.1 C:\Program Files\Common Files\Ahead\DSFilter\NeResize.ax
[18:32:54] <---MT---> 0x07C10000 1.0.0.78 C:\Program Files\Common Files\Ahead\DSFilter\NeroVideoProc.ax
[18:32:54] <---MT---> 0x07C40000 2.0.0.4 C:\Program Files\Common Files\Ahead\DSFilter\NeroFormatConv.ax
[18:32:54] <---MT---> 0x07D90000 4.1.0.4 C:\Program Files\Common Files\Ahead\lib\GCCapture.ax
[18:32:54] <---MT---> 0x08090000 4.1.0.4 C:\Program Files\Nero\Nero 7\Nero Vision\GCFilter.ax
[18:32:54] <---MT---> 0x08350000 2.0.2.54 C:\Program Files\Common Files\Ahead\DSFilter\NeVideo.ax
[18:32:54] <---MT---> 0x086C0000 10.0.0.3646 C:\WINDOWS\System32\WMVCore.DLL
[18:32:54] <---MT---> 0x08930000 1.0.0.4 C:\Program Files\Common Files\Ahead\DSFilter\NeVideoAnalyzer.ax
[18:32:54] <---MT---> 0x08E30000 6.5.1.900 C:\WINDOWS\System32\qedit.dll
[18:32:54] <---MT---> 0x092D0000 5.2.3790.3646 C:\WINDOWS\System32\Audiodev.dll
[18:32:54] <---MT---> 0x10000000 7.0.0.0 C:\Program Files\Nero\Nero 7\Nero Vision\HDCC.dll
[18:32:54] <---MT---> 0x15000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\image.dll
[18:32:54] <---MT---> 0x18000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\ISOFS.dll
[18:32:54] <---MT---> 0x19000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\MMC.DLL
[18:32:54] <---MT---> 0x1C200000 6.5.1.900 C:\WINDOWS\System32\qcap.dll
[18:32:54] <---MT---> 0x1F7B0000 3.520.7713.0 C:\WINDOWS\System32\ODBC32.dll
[18:32:54] <---MT---> 0x1F850000 3.520.7713.0 C:\WINDOWS\System32\odbcint.dll
[18:32:54] <---MT---> 0x20000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\NeroErr.dll
[18:32:54] <---MT---> 0x22000000 7.0.1.2 C:\Program Files\Nero\Nero 7\Core\newtrf.dll
[18:32:54] <---MT---> 0x35500000 6.5.1.902 C:\WINDOWS\System32\QUARTZ.dll
[18:32:54] <---MT---> 0x51000000 5.3.1.904 C:\WINDOWS\System32\DDRAW.dll
[18:32:54] <---MT---> 0x51080000 5.3.1.904 C:\WINDOWS\System32\dsound.dll
[18:32:54] <---MT---> 0x582D0000 1.1.1.5 C:\WINDOWS\System32\tssoft32.acm
[18:32:54] <---MT---> 0x5A500000 5.1.2600.0 C:\WINDOWS\System32\wiashext.dll
[18:32:54] <---MT---> 0x5AD70000 6.0.2600.0 C:\WINDOWS\system32\uxtheme.dll
[18:32:54] <---MT---> 0x5B0A0000 5.1.2600.0 C:\WINDOWS\System32\umdmxfrm.dll
[18:32:54] <---MT---> 0x5CD70000 5.1.2600.0 C:\WINDOWS\System32\serwvdrv.dll
[18:32:54] <---MT---> 0x69B10000 4.10.9404.0 C:\WINDOWS\System32\msxml4.dll
[18:32:54] <---MT---> 0x70200000 6.0.2800.1106 C:\WINDOWS\system32\WININET.dll
[18:32:54] <---MT---> 0x70BD0000 6.0.2800.1106 C:\WINDOWS\system32\SHLWAPI.dll
[18:32:54] <---MT---> 0x70D00000 5.1.3097.0 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.0.0_x-ww_8d353f13\gdiplus.dll
[18:32:54] <---MT---> 0x71000000 6.0.2800.1106 C:\WINDOWS\System32\shdocvw.dll
[18:32:54] <---MT---> 0x71160000 6.0.2800.1106 C:\WINDOWS\System32\browseui.dll
[18:32:54] <---MT---> 0x71950000 6.0.2600.0 C:\WINDOWS\WinSxS\X86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.0.0_x-ww_1382d70a\COMCTL32.dll
[18:32:54] <---MT---> 0x71AA0000 5.1.2600.0 C:\WINDOWS\System32\WS2HELP.dll
[18:32:54] <---MT---> 0x71AB0000 5.1.2600.0 C:\WINDOWS\System32\WS2_32.dll
[18:32:54] <---MT---> 0x71AD0000 5.1.2600.0 C:\WINDOWS\System32\wsock32.dll
[18:32:54] <---MT---> 0x71B20000 5.1.2600.0 C:\WINDOWS\system32\MPR.dll
[18:32:54] <---MT---> 0x71BF0000 5.1.2600.0 C:\WINDOWS\System32\SAMLIB.dll
[18:32:54] <---MT---> 0x71C10000 5.1.2600.0 C:\WINDOWS\System32\ntlanman.dll
[18:32:54] <---MT---> 0x71C20000 5.1.2600.0 C:\WINDOWS\System32\netapi32.dll
[18:32:54] <---MT---> 0x71C80000 5.1.2600.0 C:\WINDOWS\System32\NETRAP.dll
[18:32:54] <---MT---> 0x71C90000 5.1.2600.0 C:\WINDOWS\System32\NETUI1.dll
[18:32:54] <---MT---> 0x71CD0000 5.1.2600.0 C:\WINDOWS\System32\NETUI0.dll
[18:32:54] <---MT---> 0x72D10000 5.1.2600.0 C:\WINDOWS\System32\msacm32.drv
[18:32:54] <---MT---> 0x72D20000 5.1.2600.0 C:\WINDOWS\System32\wdmaud.drv
[18:32:54] <---MT---> 0x73000000 5.1.2600.0 C:\WINDOWS\System32\WINSPOOL.DRV
[18:32:54] <---MT---> 0x732E0000 5.1.2600.0 C:\WINDOWS\System32\RICHED32.DLL
[18:32:54] <---MT---> 0x736A0000 5.1.2600.0 C:\WINDOWS\System32\msrle32.dll
[18:32:54] <---MT---> 0x73B70000 1.3.3.7 C:\WINDOWS\System32\tsd32.dll
[18:32:54] <---MT---> 0x73BA0000 5.1.2600.0 C:\WINDOWS\System32\sti.dll
[18:32:54] <---MT---> 0x73BC0000 5.1.2600.0 C:\WINDOWS\System32\DCIMAN32.dll
[18:32:54] <---MT---> 0x73BD0000 5.1.2600.0 C:\WINDOWS\System32\MSVFW32.dll
[18:32:54] <---MT---> 0x73D70000 6.0.2600.0 C:\WINDOWS\System32\shgina.dll
[18:32:54] <---MT---> 0x73DD0000 6.0.4.0 C:\WINDOWS\System32\MFC42.DLL
[18:32:54] <---MT---> 0x74AD0000 6.0.2600.0 C:\WINDOWS\System32\POWRPROF.dll
[18:32:54] <---MT---> 0x74AE0000 5.1.2600.0 C:\WINDOWS\System32\CFGMGR32.dll
[18:32:54] <---MT---> 0x74E30000 5.0.0.0 C:\WINDOWS\System32\RICHED20.dll
[18:32:54] <---MT---> 0x74ED0000 5.1.2600.0 C:\WINDOWS\System32\wbem\wbemsvc.dll
[18:32:54] <---MT---> 0x74EF0000 5.1.2600.0 C:\WINDOWS\System32\wbem\wbemprox.dll
[18:32:54] <---MT---> 0x75290000 5.1.2600.0 C:\WINDOWS\System32\wbem\wbemcomn.dll
[18:32:54] <---MT---> 0x75690000 5.1.2600.0 C:\WINDOWS\System32\wbem\fastprox.dll
[18:32:54] <---MT---> 0x75970000 5.1.2600.0 C:\WINDOWS\System32\MSGINA.dll
[18:32:54] <---MT---> 0x75A70000 5.1.2600.0 C:\WINDOWS\system32\USERENV.dll
[18:32:54] <---MT---> 0x75F40000 5.1.2600.0 C:\WINDOWS\system32\appHelp.dll
[18:32:54] <---MT---> 0x75F60000 5.1.2600.0 C:\WINDOWS\System32\drprov.dll
[18:32:54] <---MT---> 0x75F70000 5.1.2600.0 C:\WINDOWS\System32\davclnt.dll
[18:32:54] <---MT---> 0x76080000 6.0.8972.0 C:\WINDOWS\System32\MSVCP60.dll
[18:32:54] <---MT---> 0x762A0000 5.1.2600.0 C:\WINDOWS\system32\MSASN1.dll
[18:32:54] <---MT---> 0x762C0000 5.131.2600.0 C:\WINDOWS\system32\CRYPT32.dll
[18:32:54] <---MT---> 0x76360000 5.1.2600.0 C:\WINDOWS\System32\WINSTA.dll
[18:32:54] <---MT---> 0x76380000 5.1.2600.0 C:\WINDOWS\System32\MSIMG32.dll
[18:32:54] <---MT---> 0x763B0000 6.0.2600.0 C:\WINDOWS\system32\comdlg32.dll
[18:32:54] <---MT---> 0x76400000 2.0.2600.0 C:\WINDOWS\System32\msi.dll
[18:32:54] <---MT---> 0x76600000 5.1.2600.0 C:\WINDOWS\System32\CSCDLL.dll
[18:32:54] <---MT---> 0x76620000 5.1.2600.0 C:\WINDOWS\System32\cscui.dll
[18:32:54] <---MT---> 0x76670000 5.1.2600.0 C:\WINDOWS\System32\SETUPAPI.dll
[18:32:54] <---MT---> 0x76990000 5.1.2600.0 C:\WINDOWS\System32\ntshrui.dll
[18:32:54] <---MT---> 0x76B20000 6.0.0.9238 C:\WINDOWS\System32\ATL.DLL
[18:32:54] <---MT---> 0x76B40000 5.1.2600.0 C:\WINDOWS\System32\WINMM.dll
[18:32:54] <---MT---> 0x76E80000 5.1.2600.0 C:\WINDOWS\System32\rtutils.dll
[18:32:54] <---MT---> 0x76E90000 5.1.2600.0 C:\WINDOWS\System32\rasman.dll
[18:32:54] <---MT---> 0x76EB0000 5.1.2600.0 C:\WINDOWS\System32\TAPI32.dll
[18:32:54] <---MT---> 0x76EE0000 5.1.2600.0 C:\WINDOWS\System32\RASAPI32.dll
[18:32:54] <---MT---> 0x76F90000 5.1.2600.0 C:\WINDOWS\System32\Secur32.dll
[18:32:54] <---MT---> 0x76FD0000 3.0.0.4414 C:\WINDOWS\System32\CLBCATQ.DLL
[18:32:54] <---MT---> 0x77050000 3.0.0.4414 C:\WINDOWS\System32\COMRes.dll
[18:32:54] <---MT---> 0x77120000 3.50.5014.0 C:\WINDOWS\system32\OLEAUT32.dll
[18:32:54] <---MT---> 0x771B0000 5.1.2600.115 C:\WINDOWS\system32\ole32.dll
[18:32:54] <---MT---> 0x773D0000 6.0.2600.0 C:\WINDOWS\system32\SHELL32.dll
[18:32:54] <---MT---> 0x77BD0000 5.1.2600.0 C:\WINDOWS\System32\midimap.dll
[18:32:54] <---MT---> 0x77BE0000 5.1.2600.0 C:\WINDOWS\System32\MSACM32.dll
[18:32:54] <---MT---> 0x77C00000 5.1.2600.0 C:\WINDOWS\system32\VERSION.dll
[18:32:54] <---MT---> 0x77C10000 6.1.8638.0 C:\WINDOWS\system32\msvcrt.dll
[18:32:54] <---MT---> 0x77C70000 5.1.2600.0 C:\WINDOWS\system32\GDI32.dll
[18:32:54] <---MT---> 0x77D40000 5.1.2600.0 C:\WINDOWS\system32\USER32.dll
[18:32:54] <---MT---> 0x77DD0000 5.1.2600.0 C:\WINDOWS\system32\ADVAPI32.dll
[18:32:54] <---MT---> 0x77E60000 5.1.2600.0 C:\WINDOWS\system32\kernel32.dll
[18:32:54] <---MT---> 0x77F50000 5.1.2600.0 C:\WINDOWS\System32\ntdll.dll
[18:32:54] <---MT---> 0x78000000 5.1.2600.109 C:\WINDOWS\system32\RPCRT4.dll
[18:32:54] <---MT---> 0x7C140000 7.10.3077.0 C:\WINDOWS\System32\MFC71.DLL
[18:32:54] <---MT---> 0x7C340000 7.10.3052.4 C:\Program Files\Nero\Nero 7\Nero Vision\MSVCR71.dll
[18:32:54] <---MT---> 0x7C3A0000 7.10.3077.0 C:\Program Files\Nero\Nero 7\Nero Vision\MSVCP71.dll
[18:32:54] <---MT---> Book type: 'Automatic'
[18:32:54] <---MT---> Properties of your project:
[18:32:54] <---MT---> Aspect ratio: Automatic
[18:32:54] <---MT---> Video mode: PAL
[18:32:54] <---MT---> Quality: Automatic
[18:32:54] <---MT---> Media type: DVD ( bytes maximum capacity)
[18:32:54] <---MT---> Total space used: 0.00 out of 4.38 GB
[18:32:54] <---MT---> Space used for menus: 0.4 out of 1024.0 MB
[18:32:54] <---MT---> Your project contains the following:
[18:32:54] <---MT---> Sample format: Automatic
[18:32:54] <---MT---> Audio format: Automatic
[18:32:54] <---MT---> Encoding mode: Fast Encoding (1-Pass)
[18:32:54] <---MT---> Number of titles: 1
[18:32:54] <---MT---> 1. clock (Video Title, 0h 00m 12s)
[18:32:54] <---MT---> Video mode: PAL
[18:32:54] <---MT---> Aspect ratio: 4:3
[18:32:54] <---MT---> Quality: Super long play (1691 kbps)
[18:32:54] <---MT---> Resolution: 352 x 576 (Half D1)
[18:32:54] <---MT---> Audio SmartEncoding ratio: 0.0 %
[18:32:54] <---MT---> Video SmartEncoding ratio: 0.0 %
[18:32:54] <---MT---> Number of menus: 1
[18:32:54] <---MT---> - Main menu (1 page)
[18:32:54] NeroVision 1c82-0010-8011-0000-9359-4045-5044
[18:32:54] <---MT---> *1c82-0010-8011-0000-9359-4045-5044
[18:32:54] <---MT---> Windows XP 5.1
[18:32:54] <---MT---> IA32
[18:32:54] <---MT---> WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
[18:32:54] <---MT---> ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
[18:32:54] <---MT---> NT-SPTI used
[18:32:54] <---MT---> Nero API version: 7.0.1.2
[18:32:54] <---MT---> Using interface version: 7.0.0.0
[18:32:54] <---MT---> Installed in: C:\Program Files\Nero\Nero 7\Core\
[18:32:54] <---MT---> Application: ahead\NeroVision
[18:32:54] <---MT---> Internal Version: 7, 0, 1, 2
[18:32:54] <---MT---> Recorder: <RICOH DVD+RW MP5125> Version: 1.72 - HA 1 TA 0 - 7.0.1.2
[18:32:54] <---MT---> Adapter driver: <IDE> HA 1
[18:32:54] <---MT---> Drive buffer : 2048kB
[18:32:54] <---MT---> Bus Type : default (0) -> ATAPI, detected: ?
[18:32:54] <---MT---> === Scsi-Device-Map ===
[18:32:54] <---MT---> CdRomPeripheral : RICOH DVD+RW MP5125 atapi Port 0 ID 0 DMA: On
[18:32:54] <---MT---> CdRomPeripheral : PIONEER DVD-ROM DVD-104 atapi Port 1 ID 0 DMA: Off
[18:32:54] <---MT---> DiskPeripheral : Maxtor 92048U8 VA51 ultra Port 2 ID 0 DMA: Off
[18:32:54] <---MT---> DiskPeripheral : ST380011A 8.01 ultra Port 2 ID 2 DMA: Off
[18:32:54] <---MT---> === CDRom-Device-Map ===
[18:32:54] <---MT---> RICOH DVD+RW MP5125 E: CDRom0
[18:32:54] <---MT---> PIONEER DVD-ROM DVD-104 F: CDRom1
[18:32:54] <---MT---> =======================
[18:32:54] <---MT---> AutoRun : 1
[18:32:54] <---MT---> Excluded drive IDs:
[18:32:54] <---MT---> WriteBufferSize: 83886080 (0) Byte
[18:32:54] <---MT---> ShowDrvBufStat : 0
[18:32:54] <---MT---> BUFE : 0
[18:32:54] <---MT---> Physical memory : 639MB (654832kB)
[18:32:54] <---MT---> Free physical memory: 263MB (269728kB)
[18:32:54] <---MT---> Memory in use : 58 %
[18:32:54] <---MT---> Uncached PFiles: 0x0
[18:32:54] <---MT---> Use Inquiry : 1
[18:32:54] <---MT---> Global Bus Type: default (0)
[18:32:54] <---MT---> Check supported media : Disabled (0)
[18:32:54] <---MT---> 19.11.2006
[18:32:54] <---MT---> NeroAPI
[18:32:54] <---MT---> 18:32:05 #1 Phase 111 File APIProgress.cpp, Line 278
[18:32:54] <---MT---> DVD-Video files sorted
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:05 #2 Text 0 File ThreadedTransfer.cpp, Line 525
[18:32:54] <---MT---> ReadBuffer-Pipe got 262144KB of Memory
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:05 #3 Text 0 File Reader.cpp, Line 124
[18:32:54] <---MT---> Reader running
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:05 #4 Text 0 File Writer.cpp, Line 113
[18:32:54] <---MT---> Writer E: RICOH DVD+RW MP5125 running
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:05 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
[18:32:54] <---MT---> First writeable address = 0 (0x00000000)
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:05 #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
[18:32:54] <---MT---> First writeable address = 0 (0x00000000)
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:05 #7 Text 0 File Burncd.cpp, Line 3302
[18:32:54] <---MT---> Turn on Disc-At-Once, using DVD media
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #8 Text 0 File DlgWaitCD.cpp, Line 279
[18:32:54] <---MT---> Last possible write address on media: 2295103 (510:01.28, 4482MB)
[18:32:54] <---MT---> Last address to be written: 1903 ( 0:25.28, 3MB)
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #9 Text 0 File DlgWaitCD.cpp, Line 291
[18:32:54] <---MT---> Write in overburning mode: NO (enabled: CD)
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #10 Text 0 File DlgWaitCD.cpp, Line 2578
[18:32:54] <---MT---> Recorder: RICOH DVD+RW MP5125, Media type: DVD+R
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #11 Text 0 File DlgWaitCD.cpp, Line 458
[18:32:54] <---MT---> >>> Protocol of DlgWaitCD activities: <<<
[18:32:54] <---MT---> =========================================
[18:32:54] <---MT---> Insert empty disc to write to.
[18:32:54] <---MT---> (Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
[18:32:54] <---MT---> Setup items (after recorder preparation)
[18:32:54] <---MT---> 0: TRM_DATA_MODE1 ()
[18:32:54] <---MT---> 2 indices, index0 (150) not provided
[18:32:54] <---MT---> original disc pos #0 + 1904 (1904) = #1904/0:25.29
[18:32:54] <---MT---> relocatable, disc pos for caching/writing not required/ required, no patch infos
[18:32:54] <---MT---> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1904 blocks [E: RICOH DVD+RW MP5125]
[18:32:54] <---MT---> --------------------------------------------------------------
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
[18:32:54] <---MT---> Prepare recorder [E: RICOH DVD+RW MP5125] for write in CUE-sheet-DAO
[18:32:54] <---MT---> DAO infos:
[18:32:54] <---MT---> ==========
[18:32:54] <---MT---> MCN: ""
[18:32:54] <---MT---> TOCType: 0x00; Session Closed, disc fixated
[18:32:54] <---MT---> Tracks 1 to 1:
[18:32:54] <---MT---> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3899392, ISRC ""
[18:32:54] <---MT---> DAO layout:
[18:32:54] <---MT---> ===========
[18:32:54] <---MT---> __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
[18:32:54] <---MT---> 0 | lead-in | 0 | 0x41 | 0x00
[18:32:54] <---MT---> 0 | 1 | 0 | 0x41 | 0x00
[18:32:54] <---MT---> 0 | 1 | 1 | 0x41 | 0x00
[18:32:54] <---MT---> 1904 | lead-out | 1 | 0x41 | 0x00
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #14 Text 0 File SCSIPassThrough.cpp, Line 36
[18:32:54] <---MT---> SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #15 Phase 24 File APIProgress.cpp, Line 278
[18:32:54] <---MT---> Caching of files started
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #16 Text 0 File Burncd.cpp, Line 4132
[18:32:54] <---MT---> Cache writing successful.
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #17 Phase 25 File APIProgress.cpp, Line 278
[18:32:54] <---MT---> Caching of files completed
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #18 Phase 36 File APIProgress.cpp, Line 278
[18:32:54] <---MT---> Burn process started at 2.4x (3,324 KB/s)
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
[18:32:54] <---MT---> Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 323
[18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
[18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[18:32:54] <---MT---> Sense Code: 0x24
[18:32:54] <---MT---> Sense Qual: 0x00
[18:32:54] <---MT---> CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
[18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
[18:32:54] <---MT---> Buffer x06a2f200: Len x804
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 323
[18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
[18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[18:32:54] <---MT---> Sense Code: 0x24
[18:32:54] <---MT---> Sense Qual: 0x00
[18:32:54] <---MT---> CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
[18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #22 Text 0 File DVDR.cpp, Line 6192
[18:32:54] <---MT---> Drive: RICOH DVD+RW MP5125
[18:32:54] <---MT---> Book Type request [gen]: DVD-ROM, write to EEPROM
[18:32:54] <---MT---> Changing the Book Type was finished successfully, return code 0
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #23 CDR -1207 File DVDR.cpp, Line 5330
[18:32:54] <---MT---> Book Type automatically set to: DVD-ROM
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:36 #24 Text 0 File DVDPlusRW.cpp, Line 666
[18:32:54] <---MT---> Start write address at LBA 0
[18:32:54] <---MT---> DVD high compatibility mode: Yes
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:49 #25 SPTI -1046 File SCSIPassThrough.cpp, Line 323
[18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
[18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[18:32:54] <---MT---> Sense Code: 0x30
[18:32:54] <---MT---> Sense Qual: 0x05
[18:32:54] <---MT---> CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
[18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
[18:32:54] <---MT---> Buffer x02bc0000: Len x10000
[18:32:54] <---MT---> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[18:32:54] <---MT---> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[18:32:54] <---MT---> 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:49 #26 CDR -1046 File Writer.cpp, Line 302
[18:32:54] <---MT---> Illegal disc
[18:32:54] <---MT---> E: RICOH DVD+RW MP5125
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #27 Text 0 File ThreadedTransfer.cpp, Line 228
[18:32:54] <---MT---> all writers idle, stopping conversion
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #28 SPTI -1066 File SCSIPassThrough.cpp, Line 323
[18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
[18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[18:32:54] <---MT---> Sense Code: 0x24
[18:32:54] <---MT---> Sense Qual: 0x00
[18:32:54] <---MT---> CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
[18:32:54] <---MT---> Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #29 Phase 127 File APIProgress.cpp, Line 278
[18:32:54] <---MT---> Generating DVD high compatibility borders
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #30 SPTI -1066 File SCSIPassThrough.cpp, Line 323
[18:32:54] <---MT---> E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
[18:32:54] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[18:32:54] <---MT---> Sense Code: 0x24
[18:32:54] <---MT---> Sense Qual: 0x00
[18:32:54] <---MT---> CDB Data: 0xF9 15 A1 02 00 00 00 00 00 00 00 00
[18:32:54] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #31 Text 0 File DVDR.cpp, Line 6192
[18:32:54] <---MT---> Drive: RICOH DVD+RW MP5125
[18:32:54] <---MT---> Book Type request [gen]: DVD+R, write to EEPROM
[18:32:54] <---MT---> Changing the Book Type was finished successfully, return code 0
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #32 CDR -1066 File WriterStatus.cpp, Line 167
[18:32:54] <---MT---> Invalid field in command
[18:32:54] <---MT---> E: RICOH DVD+RW MP5125
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #33 TRANSFER -24 File WriterStatus.cpp, Line 167
[18:32:54] <---MT---> Could not perform end of Disc-at-once
[18:32:54] <---MT--->
[18:32:54] <---MT---> 18:32:50 #34 Phase 38 File APIProgress.cpp, Line 278
[18:32:54] <---MT---> Burn process failed at 2.4x (3,324 KB/s)
[18:32:54] <---MT--->
[18:32:54] <---MT---> Existing drivers:
[18:32:54] <---MT---> File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
[18:32:54] <---MT---> Registry Keys:
[18:32:54] <---MT---> HKLM\Software\Microsoft\Windows [18:32:54] <---MT---> HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
nari
Suspended due to non-functional email address
|
28. November 2006 @ 22:14 |
Link to this message
|
Hi my name is David, i'm very new to this kind of thing, could someone please help me. i am trying to burn data (or dvd) files onto dvd but i keep getting "could not perform disc at once error" i have tried both dvd and dvd rw. however when burning to cdr it is fine.
here is my error log. i would appreciate the help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0
(Nero Express)
Recorder: <MATSHITA DVD-RAM UJ-831S>Version: 1.41 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA DVD-RAM UJ-831S >Version: 1.41 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK6025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-831S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-831S D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
BUFE : 0
Physical memory : 494MB (506736kB)
Free physical memory: 91MB (94128kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.11.2006
ISO compilation
07:46:01 #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
07:46:01 #2 Text 0 File Isodoc.cpp, Line 6508
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
07:46:02 #3 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
07:46:02 #4 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media
07:46:02 #5 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 715279 (158:57.04, 1397MB)
07:46:02 #6 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO
07:46:02 #7 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: MATSHITA DVD-RAM UJ-831S, Media type: DVD-RW
Disc Manufacturer: TDK502 - sakuM3
Disc Application Code: 64, Disc Physical Code: 214
07:46:02 #8 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
07:46:02 #9 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 715280 (715280) = #715280/158:57.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 715280 blocks [Main]
--------------------------------------------------------------
07:46:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [MATSHITA DVD-RAM UJ-831S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1464893440, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 715280 | 0 | 0x00
0 | 1 | 1 | 0x41 | 715280 | 0 | 0x00
715280 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
07:46:02 #11 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
07:46:02 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
07:46:02 #13 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
07:46:02 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
07:46:02 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2x (2,770 KB/s)
07:46:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
07:46:02 #17 Text 0 File DVDMinusRW.cpp, Line 261
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
07:46:02 #18 Phase 136 File dlgbrnst.cpp, Line 1746
Quick Format DVD-RW
07:46:27 #19 Phase 65 File dlgbrnst.cpp, Line 1746
Burn process started
07:46:27 #20 Text 0 File DVDR.cpp, Line 3026
Recording mode: Restricted Overwrite Mode
07:46:27 #21 Text 0 File DVDR.cpp, Line 3182
Start write address at LBA 0
DVD high compatibility mode: Yes
07:46:27 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 293
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06e3d800: Len x648
07:46:27 #23 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
07:53:55 #24 SPTI -1 File SCSIPassThrough.cpp, Line 293
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x01
CDB Data: 0x2A 00 00 07 B0 60 00 00 20 00 00 00
Sense Area: 0xF1 00 04 00 07 AD 60 0A 00 38 00 00 03 01
Buffer x09a30200: Len x10000
0x0F 9E 0C 3D 1D 8F 8F 1E 4C 16 22 F1 22 29 08 5E
0xD3 7E 1F 81 B7 67 3D C3 EA BB 6C D7 2F 10 92 AE
0xE1 E1 2C BD EC D1 84 C4 6D 2E 18 4D B2 53 C4 4F
07:53:56 #25 CDR -1 File Writer.cpp, Line 278
Unspecified Recorder Error
D: MATSHITA DVD-RAM UJ-831S
07:53:57 #26 Text 0 File DVDR.cpp, Line 3402
EndDAO: Last written address was 503903
07:54:01 #27 Phase 133 File dlgbrnst.cpp, Line 1746
Writing short lead-out
07:54:01 #28 SPTI -1122 File SCSIPassThrough.cpp, Line 293
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A FE 00 03 06 57
07:54:01 #29 CDR -1122 File WriterStatus.cpp, Line 161
Unable to recover TOC
D: MATSHITA DVD-RAM UJ-831S
07:54:01 #30 TRANSFER -24 File WriterStatus.cpp, Line 161
Could not perform end of Disc-at-once
07:54:01 #31 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2x (2,770 KB/s)
07:54:02 #32 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
07:54:03 #33 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
senario
|
|
luvstruck
Newbie
|
16. December 2006 @ 08:13 |
Link to this message
|
hm...strange...i have the same problem but only with one type of DVDs...TDK DVD+R 1-16x...im finishing the process of recording..and the then the message comes "could not..." bla bla
if i put Sony DVD as example...everything is ok...but i tryed to record TDK on the same recorder as mine...and its work...so..the problem is not in the DVDs so something software i think...
here's the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 г. 13:54:32
NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A101 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.5.1.1
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC CD-RW NR-9100A atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 6Y080M0 YAR5 viasraid Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B E: CDRom0
_NEC CD-RW NR-9100A F: CDRom1
Generic DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523796kB)
Free physical memory: 175MB (179440kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.12.2006
ISO compilation
20:50:43 #1 Text 0 File Isodoc.cpp, Line 6510
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
20:50:43 #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 72704KB of Memory
20:50:43 #3 Text 0 File Reader.cpp, Line 126
Reader running
20:50:43 #4 Text 0 File Writer.cpp, Line 123
Writer E: HL-DT-ST DVDRAM GSA-4163B running
20:50:43 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
20:50:43 #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
20:50:43 #7 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2193631 (487:28.31, 4284MB)
20:50:43 #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
20:50:43 #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
20:50:43 #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:50:43 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2193632 (2193632) = #2193632/487:28.32
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2193632 blocks [E: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
20:50:43 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4492558336, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2193632 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2193632 | 0 | 0x00
2193632 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
20:50:43 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
20:50:43 #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
20:50:43 #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
20:50:43 #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
20:50:43 #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5 540 KB/s)
20:50:43 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
20:50:43 #19 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
20:50:43 #20 Text 0 File DVDR.cpp, Line 6099
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
20:50:43 #21 CDR -1207 File DVDR.cpp, Line 6022
Book Type automatically set to: DVD-ROM
20:50:43 #22 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
21:04:39 #23 Text 0 File WriterStatus.cpp, Line 116
<E: HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2193632 (2178E0h), length 0 blocks
21:04:39 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
21:05:05 #25 SPTI -1194 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04
21:05:07 #26 CDR -1194 File ThreadedTransferInterface.cpp, Line 1959
PMA update failure
E: HL-DT-ST DVDRAM GSA-4163B
21:05:07 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1959
Could not perform end of Disc-at-once
21:05:36 #28 SPTI -1194 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04
21:05:36 #29 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
21:05:36 #30 CDR -1194 File WriterStatus.cpp, Line 167
PMA update failure
E: HL-DT-ST DVDRAM GSA-4163B
21:05:36 #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
21:05:36 #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5 540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.3.2005 г. 00:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.8.2004 г. 22:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 16. December 2006 @ 08:38
|
|
raviolli
Newbie
|
28. January 2007 @ 14:56 |
Link to this message
|
Hi there, i have looked through the forum and am having the same problem it happend a while ago, all of a sudden. This is the Log file:
BB
TLC
1C82-0000-19E5-MAAX-4000-4549-****
Windows XP 5.2
AMD64
Wow64Process
WinAspi: -
ahead WinASPI: File 'C:\Program Files (x86)\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A302 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4160B>Version: A302 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160827AS nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : IX9741L CZK135A 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B D: CDRom0
IX9741L CZK135A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047756kB)
Free physical memory: 502MB (514196kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.1.2007
UDF/ISO compilation
6:55:18 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:55:18 PM #2 Phase 112 File dlgbrnst.cpp, Line 1746
DVD-Video files reallocation started
6:55:18 PM #3 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1294
Required file 'VIDEO_TS.VOB' is not present
6:55:18 PM #4 Phase 115 File dlgbrnst.cpp, Line 1746
DVD-Video files reallocation failed
6:55:19 PM #5 Phase 132 File dlgbrnst.cpp, Line 1746
DVD-Video files compliance ignored
6:55:19 PM #6 Text 0 File Isodoc.cpp, Line 6509
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:55:19 PM #7 Phase 111 File dlgbrnst.cpp, Line 1746
DVD-Video files sorted
6:55:19 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
6:55:19 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
6:55:19 PM #10 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
6:55:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2294543 (509:53.68, 4481MB)
6:55:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
6:55:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
6:55:19 PM #14 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:55:19 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2294544 (2294544) = #2294544/509:53.69
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294544 blocks [D: HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------
6:55:19 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699226112, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2294544 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2294544 | 0 | 0x00
2294544 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
6:55:19 PM #17 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:55:19 PM #18 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
6:55:19 PM #19 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
6:55:19 PM #20 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
6:55:26 PM #21 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 4x (5,540 KB/s)
6:55:26 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:55:26 PM #23 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
6:55:26 PM #24 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
7:10:13 PM #25 Text 0 File WriterStatus.cpp, Line 113
<D: HL-DT-ST DVDRAM GSA-4160B> start writing Lead-Out at LBA 2294544 (230310h), length 0 blocks
7:10:47 PM #26 SPTI -1194 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04
7:10:49 PM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1920
PMA update failure
D: HL-DT-ST DVDRAM GSA-4160B
7:10:49 PM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1920
Could not perform end of Disc-at-once
7:11:22 PM #29 SPTI -1194 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 35 20 00 0E 73 04
7:11:22 PM #30 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders
7:11:22 PM #31 CDR -1194 File WriterStatus.cpp, Line 162
PMA update failure
D: HL-DT-ST DVDRAM GSA-4160B
7:11:22 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
7:11:22 PM #33 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 4x (5,540 KB/s)
7:11:22 PM #34 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:11:51 PM #35 SPTI -500 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(995) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
7:11:51 PM #36 SPTI -1114 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 10 00 00 00 00 29
7:11:51 PM #37 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
7:11:51 PM #38 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i reinstalled, Nero, i re installed the DVD burner, and i toggeled the Transfer mod from Ultra DMA2 - Ultra 33 too PIO and back and nothing.
For some reason the burns properly when i use Re writeable DVD's but not normal ones please help
|
|
Advertisement
|
|
|
|
habsalot
Suspended due to non-functional email address
|
17. March 2007 @ 09:53 |
Link to this message
|
Hi all : I would most appreciate some help with this error message. New to burning but have read the previous posts. Did manage to clean out the Roxio pest , have deleted Nero , cleaned it out using the tools and re installed. Defrag a few days ago . Firmware is all updated . Can you please review the error log and add some suggestions. I have also tried diffent media form Maxell to Verbatim , same result.
Thanks in advance.
A.R.
X
1A20-620E-0012-2525-1283-2378*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:03:20 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 3/13/2006 10:06:21 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4h
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H22N>Version: 1.00 - HA 1 TA 4 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-116 >Version: 1.22 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200JB-00GVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX175A1 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-116 D: CDRom0
SONY CD-RW CRX175A1 E: CDRom1
HL-DT-ST DVD-RAM GSA-H22N G: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 255MB (261324kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.3.2007
UDF/ISO compilation
2:03:30 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
2:03:30 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.IFO has been modified
2:03:30 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VIDEO_TS.BUP has been modified
2:03:30 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VTS_01_0.IFO has been modified
2:03:30 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 561
Content of VTS_01_0.BUP has been modified
2:03:30 PM #6 Phase 113 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed
2:03:30 PM #7 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:03:30 PM #8 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
2:03:30 PM #9 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
2:03:30 PM #10 Text 0 File Reader.cpp, Line 124
Reader running
2:03:30 PM #11 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD-RAM GSA-H22N running
2:03:30 PM #12 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:03:30 PM #13 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:03:30 PM #14 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
2:03:31 PM #15 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 587471 (130:32.71, 1147MB)
2:03:31 PM #16 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
2:03:31 PM #17 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVD-RAM GSA-H22N, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
2:03:31 PM #18 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:03:31 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 587472 (587472) = #587472/130:32.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 587472 blocks [HL-DT-ST DVD-RAM GSA-H22N]
--------------------------------------------------------------
2:03:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVD-RAM GSA-H22N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1203142656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
587472 | lead-out | 1 | 0x41 | 0x00
2:03:31 PM #21 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:03:31 PM #22 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:03:31 PM #23 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
2:03:31 PM #24 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
2:03:31 PM #25 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
2:03:31 PM #26 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
2:03:31 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:03:31 PM #28 Text 0 File DVDR.cpp, Line 2720
Recording mode: Sequential Recording Mode
2:03:31 PM #29 Text 0 File DVDR.cpp, Line 2876
Start write address at LBA 0
DVD high compatibility mode: Yes
2:03:31 PM #30 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:03:39 PM #31 SPTI -600 File SCSIPassThrough.cpp, Line 289
G: CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06f70000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2:03:39 PM #32 CDR -600 File Writer.cpp, Line 311
Device not available
G: HL-DT-ST DVD-RAM GSA-H22N
2:03:39 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:03:39 PM #34 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:03:39 PM #35 Text 0 File DVDR.cpp, Line 3116
EndDAO: Last written address was -1
2:03:56 PM #36 SPTI -600 File SCSIPassThrough.cpp, Line 289
G: CdRom4: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x033b5000: Len x48
2:03:56 PM #37 SPTI -600 File SCSIPassThrough.cpp, Line 289
G: CdRom4: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x033b5000: Len x48
2:03:57 PM #38 CDR -600 File WriterStatus.cpp, Line 167
Device not available
G: HL-DT-ST DVD-RAM GSA-H22N
2:03:57 PM #39 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
2:03:57 PM #40 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
2:03:57 PM #41 SPTI -600 File SCSIPassThrough.cpp, Line 289
G: CdRom4: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 8:05:10 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
