|
|
|
Burn failure with Nero (Internal Target Failure)
|
|
|
Loomis2k4
Suspended due to non-functional email address
|
11. February 2006 @ 09:01 |
Link to this message
|
|
I have searched thru the forums. It seems that it might help to have more memory, but I used to be able to burn without fail, now about 3 out 4 burns fail.
Here is my log, any help would be appreciated.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A104 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800EB-11DJF0 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B IdeChnDr Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081B D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 52MB (53296kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.2.2006
UDF/ISO compilation
9:31:41 AM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
9:31:41 AM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
9:31:41 AM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
9:31:41 AM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
9:31:41 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
9:31:41 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
9:31:41 AM #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4081B running
9:31:41 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:31:41 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:31:41 AM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
9:31:42 AM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1874671 (416:35.46, 3661MB)
9:31:42 AM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
9:31:42 AM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
9:31:42 AM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:31:42 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1874672 (1874672) = #1874672/416:35.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1874672 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
9:31:42 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3839328256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1874672 | lead-out | 1 | 0x41 | 0x00
9:31:42 AM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:31:42 AM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:31:42 AM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
9:31:42 AM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
9:31:42 AM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
9:31:42 AM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
9:31:42 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:31:42 AM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
9:31:42 AM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
9:31:42 AM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:31:48 AM #27 Text 0 File Cdrdrv.cpp, Line 1200
09:31:48.953 - D: HL-DT-ST DVDRAM GSA-4081B : Queue again later
9:34:25 AM #28 SPTI -1061 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 00 00 05 95 A0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 32 24 04 0C 44 86
Buffer x041f0000: Len x10000
0x00 00 01 BA 44 8E D7 C8 C5 AD 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 05 21 23 B9 23 57 80 02 01 E4
0xE6 99 42 56 E7 1B 6F 9E 3C 7C D7 2A 83 42 C6 A0
9:34:25 AM #29 CDR -1061 File Writer.cpp, Line 311
Internal target failure
D: HL-DT-ST DVDRAM GSA-4081B
9:34:25 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:34:25 AM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:34:25 AM #32 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 365983
9:34:25 AM #33 CDR -1061 File WriterStatus.cpp, Line 167
Internal target failure
D: HL-DT-ST DVDRAM GSA-4081B
9:34:25 AM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
9:34:26 AM #35 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/7/2005 8:34:01 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 10/15/2002 12:00:00 AM (Adapter driver for rec)
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 10/15/2002 12:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
1 product review
|
11. February 2006 @ 10:31 |
Link to this message
|
Quote:
Physical memory : 253MB (260080kB)
Free physical memory: 52MB (53296kB)
Memory in use : 79
You should get more memory.I think 500Mb would be minimum to burning DVDs
Quote:
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
You might want to try different kind of media. On some threads, people with similar error like yours suggested that the burner might be overheating. Are your discs hot when coming out of the burner?
|
|
Loomis2k4
Suspended due to non-functional email address
|
11. February 2006 @ 14:31 |
Link to this message
|
|
Thanks for the input. I have been planning on increasing my ram anyways, so I will try that.
As to media, I never had problems before I started using the Sony media thats in the error log posted above. Right before this failure that I have posted in this thread, I successfully burned the exact same set of files to a Fuji DVD + RW. Is it possible my burner prefers RW to R, or + to - types of DVD's?
|
AfterDawn Addict
|
11. February 2006 @ 14:36 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 11. February 2006 @ 14:37
|
|
Loomis2k4
Suspended due to non-functional email address
|
11. February 2006 @ 15:18 |
Link to this message
|
|
Thanks Gwendolin. I thought 104a was the most current for my drive, as that is the most current one I could find at the LG site.
How did you find one more current than the Manufacturer has available on their site?
Thanks again.
|
AfterDawn Addict
|
11. February 2006 @ 15:21 |
Link to this message
|
|
|
Advertisement
|
|
|
|
Loomis2k4
Suspended due to non-functional email address
|
11. February 2006 @ 16:09 |
Link to this message
|
Well, the firmware upgrade didnt seem to help. Guess I will try upgrading the memory, and different media.
Here is the lastest Nero log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A106 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4081B>Version: A106 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800EB-11DJF0 IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B IdeChnDr Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4081B D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 60MB (61676kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.2.2006
UDF/ISO compilation
6:04:08 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
6:04:08 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
6:04:08 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:04:08 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
6:04:08 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
6:04:08 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:04:08 PM #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4081B running
6:04:08 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:04:08 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:04:08 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
6:04:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1874671 (416:35.46, 3661MB)
6:04:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:04:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-4081B, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
6:04:08 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:04:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1874672 (1874672) = #1874672/416:35.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1874672 blocks [HL-DT-ST DVDRAM GSA-4081B]
--------------------------------------------------------------
6:04:08 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3839328256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1874672 | lead-out | 1 | 0x41 | 0x00
6:04:08 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:04:08 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:04:08 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
6:04:08 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
6:04:08 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
6:04:08 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
6:04:09 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:04:09 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
6:04:09 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
6:04:09 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:04:17 PM #27 Text 0 File Cdrdrv.cpp, Line 1200
18:04:17.750 - D: HL-DT-ST DVDRAM GSA-4081B : Queue again later
6:04:22 PM #28 SPTI -1061 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 10 32 24 04 0C 44 86
Buffer x041f0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6:04:22 PM #29 CDR -1061 File Writer.cpp, Line 311
Internal target failure
D: HL-DT-ST DVDRAM GSA-4081B
6:04:22 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:04:22 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:04:22 PM #32 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1
6:04:24 PM #33 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/7/2005 8:34:01 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeBusDr.sys': Ver=2.3.0.2160, 10/01/2002, size=13891 bytes, created 10/15/2002 12:00:00 AM (Adapter driver for rec)
File 'Drivers\IdeChnDr.sys': Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 10/15/2002 12:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
