|
|
|
Session fixation error, cannot write any DVD.
|
|
|
DePhille
Newbie
|
11. February 2006 @ 23:48 |
Link to this message
|
Hi,
I'm running NERO 6 Ultra Edition on Windows XP Professional Service Pack 2 with a NEC ND-3540A.
When the Philips DVD+R is almost written it stops with the error "Session fixation error" followed by "Could not end Disc-At-Once".
I've tried changing some setting like Multisession and no multisession etc. but they all errored. I've spent a total of around 6 DVDs on this :/
Here's the NERO log:
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.0.0, size=17920 bytes, created 31/01/2005 15:05:30
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <_NEC DVD_RW ND-3540A> Version: 1.01 - HA 0 TA 2 - 6.6.0.3
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <_NEC DVD_RW ND-3540A >Version: 1.01 - HA 0 TA 2 - 6.6.0.3
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3540A nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : WU1553D SWX063U 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3540A D: CDRom0
WU1553D SWX063U E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 522MB (535316kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.2.2006
UDF compilation
10:34:25 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:34:25 #2 Text 0 File Reader.cpp, Line 127
Reader running
10:34:25 #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3540A running
10:34:25 #4 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
10:34:25 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1874441 (416:32.41, 3661MB)
10:34:25 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
10:34:25 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-3540A, Media type: DVD+R
10:34:25 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:34:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1874592 (1874592) = #1874592/416:34.42
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1874592 blocks [_NEC DVD_RW ND-3540A]
--------------------------------------------------------------
10:34:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [_NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3839164416, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1874592 | lead-out | 1 | 0x41 | 0x00
10:34:38 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:34:38 #12 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
10:34:38 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:34:38 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
10:34:38 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:34:38 #16 SCSI -1066 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03905000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:34:38 #17 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
10:43:32 #18 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-3540A > start writing Lead-Out at LBA 1874592 (1C9AA0h), lenght 0 blocks
10:43:32 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:44:12 #20 SCSI -1176 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
10:44:12 #21 CDR -1176 File ThreadedTransferInterface.cpp, Line 1858
Session fixation error
10:44:12 #22 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1858
Could not perform end of Disc-at-once
10:44:51 #23 SCSI -1176 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
10:44:51 #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:44:51 #25 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
10:44:51 #26 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:44:52 #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0482 built by: WinDDK, size=88576 bytes, created 17/01/2005 6:43:26 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Do you know why it always stops like this?
Grtz , DePhille
|
|
Advertisement
|
|
|
|
|
FireKat
Suspended due to non-functional email address
|
11. February 2006 @ 23:51 |
Link to this message
|
Reality is an illusion and subject to interpretation.
This message has been edited since posting. Last time this message was edited on 12. February 2006 @ 00:04
|
AfterDawn Addict
1 product review
|
12. February 2006 @ 00:16 |
Link to this message
|
Recorder: <_NEC DVD_RW ND-3540A> Version: 1.01
Also your firmware is 2 versions behind. 1.03 is available
herehttp://support.necsam.com/oem/downloads/flashfirmware/fw/NECND354...
Quote:
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST
Your burner doesn't like the media. updating the firmware might take care of that. If you use good media, like verbatims, Taiyo Yudens, Maxell or Sony Made in Japan, and update your firmware, burning at x8 should be no problem. But philips is not a great media.
I would also update nero to version 6.6.0.18, as you are running 6.6.0.3
This message has been edited since posting. Last time this message was edited on 12. February 2006 @ 00:22
|
|
DePhille
Newbie
|
12. February 2006 @ 00:33 |
Link to this message
|
Okay , I did all the above and this is what i'm getting now: Power calibration error.
Here's the fresh log:
Quote:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.0.0, size=17920 bytes, created 31/01/2005 15:05:30
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <_NEC DVD_RW ND-3540A> Version: 1.03 - HA 0 TA 2 - 6.6.0.3
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <_NEC DVD_RW ND-3540A >Version: 1.03 - HA 0 TA 2 - 6.6.0.3
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-3540A nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : WU1553D SWX063U 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3540A D: CDRom3
WU1553D SWX063U E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 588MB (603024kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.2.2006
UDF compilation
11:28:24 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:28:24 #2 Text 0 File Reader.cpp, Line 127
Reader running
11:28:24 #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3540A running
11:28:24 #4 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
11:28:25 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1874457 (416:32.57, 3661MB)
11:28:25 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
11:28:25 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-3540A, Media type: DVD+R
11:28:25 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:28:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1874608 (1874608) = #1874608/416:34.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1874608 blocks [_NEC DVD_RW ND-3540A]
--------------------------------------------------------------
11:28:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [_NEC DVD_RW ND-3540A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3839197184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1874608 | lead-out | 1 | 0x41 | 0x00
11:28:32 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:28:32 #12 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
11:28:32 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:28:32 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
11:28:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:28:32 #16 SCSI -1066 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x038B5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
11:28:32 #17 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
11:29:34 #18 SCSI -1106 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03EF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
11:29:34 #19 CDR -1106 File Writer.cpp, Line 311
Power calibration error
11:29:34 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:29:34 #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:29:35 #22 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
11:29:35 #23 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
11:29:35 #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0482 built by: WinDDK, size=88576 bytes, created 17/01/2005 6:43:26 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I've noticed that Nero sais that DMA is turned off though in my settings it's all DMA :/.
I've got an ASUS A8N-E Motherboard wuith nForce4 if that helps :/
Grtz , DePhille
|
|
FireKat
Suspended due to non-functional email address
|
12. February 2006 @ 00:38 |
Link to this message
|
|
Have you ever gone into your bios before? If so, go back into the bios and change it to let the bios govern the drives (instead of the os).
Reality is an illusion and subject to interpretation.
|
|
DePhille
Newbie
|
12. February 2006 @ 00:45 |
Link to this message
|
It's currently set to the option where the BIOS can choose the transfer mode.
I've gone into the BIOS before but that was for issues not related to my DVD drive.
Anyway , here's a screenshot of the current settings:
[img=http://img96.imageshack.us/img96/9108/dvdhelp15gu.gif]
Grtz , DePhille
|
|
FireKat
Suspended due to non-functional email address
|
12. February 2006 @ 00:54 |
Link to this message
|
|
No image is showing, sorry.
You can tell it to let bios handle transfer mode, but if you tell it that you have a plug-n-play os, the os can still override the bios (not suppose to, but can... mine did). Make sure you tell it that your os is not plug-n-play.
Reality is an illusion and subject to interpretation.
|
|
DePhille
Newbie
|
12. February 2006 @ 01:21 |
Link to this message
|
|
And how do I do that?
|
|
Advertisement
|
|
|
|
FireKat
Suspended due to non-functional email address
|
12. February 2006 @ 01:43 |
Link to this message
|
|
go into the bios, and find the option for plug-n-play os. Change it to no. The the bios will handle the dma settings on your drives instead of letting windows.
Reality is an illusion and subject to interpretation.
|
|
