|
|
|
Nero burn fails - see log
|
|
|
ciphin78
Newbie
|
13. February 2006 @ 04:39 |
Link to this message
|
|
I've upgraded my firmware on my DVD drive (SONY DRU-800A) and I've upgraded to the lastest version of NERO. See log below. Any thoughts?
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:03:20 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 3 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY CD-RW CRX216E >Version: PD01 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX216E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-800A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY CD-RW CRX216E D: CDRom0
SONY DVD RW DRU-800A E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785404kB)
Free physical memory: 303MB (310340kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.2.2006
Burn DVD Image
7:23:46 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
7:23:46 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
7:23:46 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running
7:23:47 PM #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
7:23:47 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2203897 (489:45.22, 4304MB)
7:23:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
7:23:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
7:23:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:23:47 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2203898 (2203898) = #2203898/489:45.23
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2203898 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------
7:23:47 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [SONY DVD RW DRU-800A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513583104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2203898 | lead-out | 1 | 0x41 | 0x00
7:23:47 PM #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:23:47 PM #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:23:47 PM #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
7:23:47 PM #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
7:23:47 PM #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
7:23:47 PM #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 6x (8,310 KB/s)
7:23:47 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:23:47 PM #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
7:23:47 PM #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
7:23:47 PM #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:24:24 PM #21 Text 0 File Cdrdrv.cpp, Line 1200
19:24:24.234 - E: SONY DVD RW DRU-800A : Queue again later
7:27:12 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 289
E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 0F 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x09860000: Len x10000
0x00 00 01 BA 44 00 F6 4F 3C D7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 5E 01 C1 FB 51 15 07 02 00
0x81 FA 00 81 F9 A0 0A C0 74 00 EC 01 4A 4B 00 78
7:27:12 PM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: SONY DVD RW DRU-800A
7:27:12 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:27:12 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:27:12 PM #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 3839
7:27:12 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2002 7:05:10 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/12/2005 7:24:18 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
13. February 2006 @ 12:45 |
Link to this message
|
I know you're not going to like this but I have looked through the log and cant find anything wrong.
Quote:
Sense Key: 0x02 (KEY_NOT_READY
, this is all I can find and I dont know what it means, sit back someone will come along now that the thread is at the top.
|
Senior Member
|
13. February 2006 @ 14:21 |
Link to this message
|
Thats pointing to the write stratigy its using to write the disk. It then goes on to say Quote:
7:27:12 PM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: SONY DVD RW DRU-800A
That leads me to think its not realy the disk but the write stratigy for 6x. So try to slow it down to 4x or speed it up to 8x to see if write stratigy for 4x or 8x will be better for those disk.
|
AfterDawn Addict
|
13. February 2006 @ 14:27 |
Link to this message
|
|
@Whompus, thanks for that bit of info, Cheers
|
|
ciphin78
Newbie
|
14. February 2006 @ 06:28 |
Link to this message
|
I tried it 4x and got the same results. The log is attached.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:03:20 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <SONY DVD RW DRU-800A> Version: KY06 - HA 1 TA 3 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY CD-RW CRX216E >Version: PD01 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX216E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-800A atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY CD-RW CRX216E D: CDRom0
SONY DVD RW DRU-800A E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785404kB)
Free physical memory: 215MB (220988kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.2.2006
Burn DVD Image
6:29:45 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
6:29:45 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
6:29:45 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-800A running
6:29:45 PM #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
6:29:45 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2203897 (489:45.22, 4304MB)
6:29:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:29:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: SONY DVD RW DRU-800A, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193
6:29:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:29:45 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2203898 (2203898) = #2203898/489:45.23
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2203898 blocks [SONY DVD RW DRU-800A]
--------------------------------------------------------------
6:29:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [SONY DVD RW DRU-800A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513583104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2203898 | lead-out | 1 | 0x41 | 0x00
6:29:45 PM #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:29:45 PM #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:29:45 PM #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
6:29:45 PM #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
6:29:45 PM #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
6:29:45 PM #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
6:29:45 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:29:46 PM #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
6:29:46 PM #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
6:29:46 PM #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:30:15 PM #21 Text 0 File Cdrdrv.cpp, Line 1200
18:30:15.906 - E: SONY DVD RW DRU-800A : Queue again later
6:34:01 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 289
E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 34 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x097e0000: Len x10000
0x00 00 01 BA 44 03 36 4C 35 D7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 F7 71 8A A2 41 80 3A 18 00
0xE4 30 06 08 00 72 00 B4 03 30 C0 0C C9 A5 20 9B
6:34:01 PM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: SONY DVD RW DRU-800A
6:34:01 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:34:01 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:34:01 PM #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 13311
6:34:01 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2002 7:05:10 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/12/2005 7:24:18 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
1 product review
|
14. February 2006 @ 08:05 |
Link to this message
|
Quote:
Nero Version: 6.6.1.4
I would personally go back to version 6.6.0.18, the latest version that you are using has yet to have all the wrinkles ironed out. I rarely update until needed...if it ain't broke don't fix it.
You can get 6.6.0.18 here:
http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
Quote:
6:34:01 PM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: SONY DVD RW DRU-800A
Still getting the illegal disc error. I would try another speed again(maybe 8X) or another brand of discs...I suggest Verbatim, Taiyo Yuden or Sony, Fuji, Maxell(made in Japan).
This message has been edited since posting. Last time this message was edited on 14. February 2006 @ 08:07
|
|
Advertisement
|
|
|
Senior Member
|
14. February 2006 @ 10:06 |
Link to this message
|
i agree on the media..
Quote:
Disc Manufacturer: FUJIFI - LM03
i did check it out on videohelp.com and mixed results and bad results
|
|
