|
|
|
Nero 7.0 burning issues
|
|
Member
|
17. February 2006 @ 11:48 |
Link to this message
|
|
I was copying a dvd 2 dvd-Not a movie or anthing that has a encryption
so i shouldnt have any problems but got this message:
1:08:50 PM #19 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(-2147483645) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 10 E4 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x045c0000: Len x10000
0x5D E0 40 94 E5 4D FE 56 7B 16 94 B4 98 19 F1 77
0x6D 20 6C 2D 2C 0F 81 44 9A C1 1B CF 2E 87 52 31
0x46 4A A8 42 3C 4A 29 F1 B3 00 D4 3E BB 1C AC 9A
1:08:50 PM #20 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 10 E4 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21 02
Buffer x04611200: Len x10000
0x5D E0 40 94 E5 4D FE 56 7B 16 94 B4 98 19 F1 77
0x6D 20 6C 2D 2C 0F 81 44 9A C1 1B CF 2E 87 52 31
0x46 4A A8 42 3C 4A 29 F1 B3 00 D4 3E BB 1C AC 9A
1:08:50 PM #21 CDR -1064 File Writer.cpp, Line 302
Invalid block address
E: PLEXTOR DVDR PX-740A
1:08:50 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:08:51 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:08:51 PM #24 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 1106943
1:08:51 PM #25 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out
1:09:55 PM #26 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11,080 KB/s)
What does that mean?
any reply would be appreciated thanks in advance to all that reply.
|
|
Advertisement
|
  |
|
|
AfterDawn Addict
1 product review
|
17. February 2006 @ 17:16 |
Link to this message
|
Quote:
:08:50 PM #19 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(-2147483645) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Quote:
1:08:50 PM #20 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
The log is incomplete. From the little piece, it looks like your burner does not recognize the media, or you are burning too fast. if you put the entire log it will give more info. Remove SN before posting.
This message has been edited since posting. Last time this message was edited on 17. February 2006 @ 17:17
|
Member
|
18. February 2006 @ 06:56 |
Link to this message
|
OK heres the whole log :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PLEXTOR DVDR PX-740A> Version: 1.02 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-740A >Version: 1.02 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y080P0 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-740A nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : DVD-16X DVD-ROM BDV316E nvatabus Port 0 ID 3 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-740A E: CDRom0
DVD-16X DVD-ROM BDV316E F: CDRom1
SCSIVAX DVD/CD-ROM I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 548MB (562120kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.2.2006
===== Disc-Copy over image - 1st step : Copy to image ...
1:00:32 PM #1 SPTI -1080 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x03887200: Len x1008
1:00:39 PM #2 SPTI -1080 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1080)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A
Buffer x03889c00: Len x1008
1:00:54 PM #3 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:00:54 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 192KB of Memory
1:00:54 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
1:00:54 PM #6 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running
1:00:54 PM #7 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD+R
S01 T01 Con 0x14 Start 0 Len 1233568 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
1:00:54 PM #8 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 1233568 = 1233568, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
1:00:54 PM #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
1:00:55 PM #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1233567 (274:07.42, 2409MB)
1:00:55 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
1:00:55 PM #12 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:00:55 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1233568 (1233568) = #1233568/274:7.43
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1233568 blocks [Image Recorder]
--------------------------------------------------------------
1:00:55 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2526347264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1233568 | lead-out | 1 | 0x41 | 0x00
1:00:55 PM #15 Phase 120 File dlgbrnst.cpp, Line 1724
Creating the image for burning
1:00:55 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:04:06 PM #17 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 1233568 (12D2A0h), length 0 blocks
1:04:06 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:04:06 PM #19 Phase 121 File dlgbrnst.cpp, Line 1724
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
1:04:13 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
1:04:13 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
1:04:13 PM #3 Text 0 File Writer.cpp, Line 113
Writer E: PLEXTOR DVDR PX-740A running
1:04:13 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2526347264
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=274:07.43 ( 1233568) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Administrator\My Documents\TempImage.nrg>
1:04:13 PM #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
1:04:37 PM #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1233567 (274:07.42, 2409MB)
1:04:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
1:04:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PLEXTOR DVDR PX-740A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
1:04:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
1:04:37 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1233568 (1233568) = #1233568/274:7.43
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1233568 blocks [E: PLEXTOR DVDR PX-740A]
--------------------------------------------------------------
1:04:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: PLEXTOR DVDR PX-740A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2526347264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1233568 | lead-out | 1 | 0x41 | 0x00
1:04:37 PM #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:04:37 PM #13 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11,080 KB/s)
1:04:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:04:37 PM #15 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession
1:04:37 PM #16 Text 0 File MMC.cpp, Line 21541
Set BUFE: BURN-Proof -> ON
1:04:37 PM #17 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
1:04:37 PM #18 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:08:50 PM #19 SPTI -500 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(-2147483645) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 10 E4 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x045c0000: Len x10000
0x5D E0 40 94 E5 4D FE 56 7B 16 94 B4 98 19 F1 77
0x6D 20 6C 2D 2C 0F 81 44 9A C1 1B CF 2E 87 52 31
0x46 4A A8 42 3C 4A 29 F1 B3 00 D4 3E BB 1C AC 9A
1:08:50 PM #20 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 10 E4 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 21 02
Buffer x04611200: Len x10000
0x5D E0 40 94 E5 4D FE 56 7B 16 94 B4 98 19 F1 77
0x6D 20 6C 2D 2C 0F 81 44 9A C1 1B CF 2E 87 52 31
0x46 4A A8 42 3C 4A 29 F1 B3 00 D4 3E BB 1C AC 9A
1:08:50 PM #21 CDR -1064 File Writer.cpp, Line 302
Invalid block address
E: PLEXTOR DVDR PX-740A
1:08:50 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:08:51 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:08:51 PM #24 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 1106943
1:08:51 PM #25 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out
1:09:55 PM #26 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11,080 KB/s)
|
Moderator
1 product review
|
18. February 2006 @ 09:15 |
Link to this message
|
Quote:
DiskPeripheral : ST3160023A nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6Y080P0 nvatabus Port 0 ID 1 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-740A nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : DVD-16X DVD-ROM BDV316E nvatabus Port 0 ID 3 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
DMA should be on for all drives. Here is a guide, courtesy of alkohol:
http://forums.afterdawn.com/thread_view.cfm/260038
Quote:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Your drive is not even recognizing your blanks, your media code should be here. A firmware update could solve this.
Quote:
Recorder: <PLEXTOR DVDR PX-740A> Version: 1.02
But your firmware is current according to RPC1, I would suggest a different brand of media.
|
AfterDawn Addict
|
18. February 2006 @ 10:24 |
Link to this message
|
@treezy
In addition to what LOCOENG had mentioned, below are what I see:
Quote:
Nero Version: 7.0.0.0
This is the very first version of Nero 7 and it has a lot of bugs, so it's wise to get Nero 7.0.1.4 or 7.0.1.4B (these 2 are the best versions so far). I've been burning with 7.0.1.4 and I've never experienced any issues whatsoever.
Quote:
Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
Hmmm... I think it's wise to try YUDEN, Verbatim or Hitachi Maxell (made in japan). I've seeen more failures from Ritek than any other high quality brands of media. Ritek is decent, but it won't hurt to switch to Taiyo Yuden, Verbs. or Hitachi Maxell for a change. I've used these 3 top media (hundreds and hundreds "thousand" of backups) and I've never encountered any issues when burning or playback. However, the choice is yours.
Quote:
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 10 E4 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 10 E4 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00
Again, this means that your burner doesn't really like the media you're using. Perhaps it is a defected blank or a defected dye. See above reply for other high quality media.
Quote:
Burn process failed at 8x (11,080 KB/s)
Try to burn at 4X on your next dvd burning project. 4X is the best and safest speed for burning. Yes, it is true that I've burned 4X (80% of burning) and 8X (20% of burning), but I highly recommend to burn at 4X to avoid getting coasters. However, the choice is yours.
Below is an example of a successful burned log taken from mine. You can compare mine to yours and see if you'll notice the differences, there should be some in there. **NOTE: how I burned to the very last edge at 4451MB using top notch media, YUDEN000T02 and it still a success.
Quote:
====== *** Nero Burning ROM, History File *** ======
David X
Home
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX <======= (SERIAL EDITED)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 520MB (533136kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2006
UDF/ISO compilation
1:48:43 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
1:48:44 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
1:48:44 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:48:44 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
1:48:44 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
1:48:44 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:48:44 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
1:48:44 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:48:44 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:48:44 PM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
1:48:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2278959 (506:26.09, 4451MB)
1:48:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:48:44 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
1:48:44 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:48:44 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2278960 (2278960) = #2278960/506:26.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2278960 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
1:48:44 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4667310080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2278960 | lead-out | 1 | 0x41 | 0x00
1:48:44 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:48:44 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
1:48:44 PM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
1:48:44 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
1:48:44 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
1:48:44 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:48:44 PM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
1:48:44 PM #24 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
1:48:44 PM #25 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
1:48:44 PM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
2:03:08 PM #27 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2278960 (22C630h), length 0 blocks
2:03:08 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:03:32 PM #29 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
2:03:32 PM #30 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
1 product review
|
18. February 2006 @ 15:38 |
Link to this message
|
Quote:
**NOTE: how I burned to the very last edge at 4451MB using top notch media, YUDEN000T02 and it still a success.
Showoff...LOL
7.0.0.0 is the version I still use, never upgraded any of it and have had no problems. But I don't use every feature of the suite.
|
AfterDawn Addict
|
18. February 2006 @ 17:32 |
Link to this message
|
Quote:
**NOTE: how I burned to the very last edge at 4451MB using top notch media, YUDEN000T02 and it still a success.
Quote:
Showoff...LOL
@LOCOENG buddy,
LOL, indeed. It's true though and it's a proven fact. I even went as far as 4460MB sometimes and I still got successful burned.
|
Member
|
18. February 2006 @ 18:03 |
Link to this message
|
|
Thanks (LOCOENG,alkohol)for all your great expertise.
I have one more problem I checked Device manager about my DMA I have it set as :Let Bios Set Transfer mode. Should I change that? and if so what should i chande it to. Ultra DMA 0,Ultra DMA 1,Ultra DMA 2,
MultiWord DMA,PIO mode etc.
Thanks once again for the help.
|
AfterDawn Addict
1 product review
|
18. February 2006 @ 20:08 |
Link to this message
|
|
@treezy
If you have a Nvidia motherboard, you have to let Bios handle DMA. That's what I read i some other threads. The operating system can override bios though and set DMA off, so you have to go in Bios and turn off plug-n-play for operating system.
This message has been edited since posting. Last time this message was edited on 18. February 2006 @ 20:09
|
Member
|
19. February 2006 @ 00:05 |
Link to this message
|
|
yeah i have a nforce3 {nvidia}mobo. Ill just leave it as it is and let it do everyhing by itself. Suprisingly I have not ran into that problem again even used the same media and same speeds. kind of strange, but i will slow it down a bit 8x is not very stable although the reason i was burning that fast in the 1st place is those ritekF1 are 16x media obviously not so great ones i have some verbatim 16x those will probably work better.just wanted to use those riteks {office depot brand} up i have bout a hundred of em. anyhow Thanks for the reply
|
Moderator
1 product review
|
19. February 2006 @ 15:23 |
Link to this message
|
@alkohol
Quote:
I even went as far as 4460MB sometimes and I still got successful burned.
You da man...LOL
@treezy
You are very welcome.
Ritek's used to be considered in the upper echelons of blank media, but as of late they have let more than a few people down. You should be happy with the Verbs.
Happy burning.
|
AfterDawn Addict
1 product review
|
19. February 2006 @ 17:17 |
Link to this message
|
@alkohol
Quote:
I even went as far as 4460MB sometimes and I still got successful burned
I don't know why, several times Nero did not customized the size to 4300Mb as I asked him to.Still don't know why. Anyhow, the burn was succesful. I looked at the log, and i see last address to be written 4460Mb! I say sh@#t, why? Anyway, it happen again with a different burn(so Nero Recode 2 must be acting up). Everything else works fine though,just would not customize as I asked. Not asking for a fix, but any suggestions welcome!
Anyway, reading your success after venturing "where no man has gone before", I did a scan of the disc burned all the way to 4460Mb(that's what stupid Recode wanted). The disc was a Verbatim +R X8. I don't know if my Nec 3550A is such a great scanner, even though it burns great. While scanning, the quality of the disc was 98 all the way to 89 percent of the reading. By the time the scan ended, during the last 10% the quality dropped to 55. The disc plays with absolutely no problems.
Another one, same thing, but this time with a Ritek 03(maxell +R X8), the burn failed.
So, did you do a Q Scan of that infamous disc burned all the way to the edge? just curious...
This message has been edited since posting. Last time this message was edited on 19. February 2006 @ 17:19
|
AfterDawn Addict
|
19. February 2006 @ 17:49 |
Link to this message
|
@cyprusrom
To customize with Nero Recode 2:
<> click on arrow down, right after you've launched Nero Recode 2
<> type in 4460MB and OK, that's it...
If you're using top notch media like YUDEN, then you SHOULD NEVER have to worry about getting bad burned or poor quality scanned. I've always customized all of my backups to anywhere from 4400MB - 4460MB. And yes, I did get good results on the quality scans as well. However, I only burned at 4X (50%) and 8X(50%) sometimes. Below is an example of 4450MB scanned that I burned yesterday.
|
AfterDawn Addict
1 product review
|
19. February 2006 @ 17:56 |
Link to this message
|
@ Alkohol
That looks excellent!
I know how customise with Nero, but even though I put down 4300, somehow it still outputs 4460Mb.Donno why.
My scan didn't look tha good. Last 10% of the scan, the quality dropped from 98% to 55%.
|
AfterDawn Addict
|
19. February 2006 @ 18:01 |
Link to this message
|
|
@alkohol, once again I have learned something from you, it had me stumped how to set burn target to 4300, next question , how do I do it in NVE
|
AfterDawn Addict
|
19. February 2006 @ 18:05 |
Link to this message
|
Here is another awesome scanned, again from the one and only famous YUDEN000T02 (8X DVD+R MADE IN JAPAN) book typing as DVD-ROM. I've just burned this a few hours ago (SAW 2, US version, Region 1). Taiyo Yuden ROCK!!
|
|
Advertisement
|
|
|
AfterDawn Addict
|
19. February 2006 @ 18:53 |
Link to this message
|
Quote:
@ Alkohol
That looks excellent!
I know how customise with Nero, but even though I put down 4300, somehow it still outputs 4460Mb.Donno why.
My scan didn't look tha good. Last 10% of the scan, the quality dropped from 98% to 55%.
@cyprusrom
Are you sure? Because my Nero Recode 2 will take anything that I customized. Look at pictures for reference for the Video Quality differences. Again, with top notch media like Taiyo Yuden, Verbatim "advanced azo" and Hitachi Maxell (made in japan), you can't go wrong with 4450MB - 4460MB.
@gwendolin
As for Nero Vision 4 or Nero Vision Express 3, you can only do DVD, DVD9 or DVD-1 (8cm). I usually just go with DVD and if I went overboard (with 4 or 5 anime episodes), then I'll just have Nero Recode 2 customized to 4460MB later on, once Nero Vision 4 is done with the converting/transcoding process. With 4460MB you'll get less compress, meaning the movie will be better on the quality in results.
|
|
