Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Saturday 30.11.2024 / 19:40
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > software specific discussion > nero discussion > my dvd-r's start burn then fail.
Show topics
 
Forums
Forums
My DVD-R's start burn then fail.
  Jump to:
 
Posted Message
BradBo
Suspended due to non-functional email address
_ 		18. February 2006 @ 18:36 _ Link to this message    Send private message to this user   
I have destoryed about 6 DVD-R's so far and I am at a loss as to why.

I never had a problem before.
I burn with a Dell Inspirion 8500 using a USB2.0 cable to an ecternal dvd burner.
I was using a Pioneer till it started to fail then I went ahead and bought a new NEC 3550A burner.
Well that didnt solve the problem and I got the same failer.
Here is the log file.

Brad



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 10:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.1
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 2 TA 2 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <QSI CDRW/DVD SBW-242>Version: UD30 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
QSI CDRW/DVD SBW-242 D: CDRom0
_NEC DVD_RW ND-3550A F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 79MB (81548kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.2.2006
UDF/ISO compilation
8:23:43 PM #1 SCSI -1067 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 2, LUN 0, buffer 0x038F7000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

8:23:46 PM #2 Phase 112 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation started

8:23:46 PM #3 Phase 114 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation completed (no file modified)

8:23:46 PM #4 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

8:23:46 PM #5 Phase 111 File dlgbrnst.cpp, Line 1853
DVD-Video files sorted

8:23:47 PM #6 Text 0 File Reader.cpp, Line 127
Reader running

8:23:47 PM #7 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3550A running

8:23:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

8:23:47 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

8:23:47 PM #10 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

8:23:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2167535 (481:40.35, 4233MB)

8:23:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

8:23:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

8:23:47 PM #14 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:23:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2167536 (2167536) = #2167536/481:40.36
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2167536 blocks [_NEC DVD_RW ND-3550A]
--------------------------------------------------------------

8:23:47 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4439113728, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2167536 | lead-out | 1 | 0x00 | 0x41

8:23:47 PM #17 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

8:23:48 PM #18 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

8:23:48 PM #19 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

8:23:48 PM #20 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 8x (11,080 KB/s)

8:23:48 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:23:48 PM #22 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 6:46,233 (406233ms) -> OK

8:23:48 PM #23 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

8:23:48 PM #24 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

8:23:48 PM #25 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

8:23:48 PM #26 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

8:23:58 PM #27 Text 0 File Cdrdrv.cpp, Line 1284
20:23:58.836 - _NEC DVD_RW ND-3550A\H2 T2 : Queue again later

8:24:00 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 2, LUN 0, buffer 0x03CB0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

8:24:00 PM #29 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
_NEC DVD_RW ND-3550A\H2 T2

8:24:00 PM #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:24:01 PM #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

8:24:01 PM #32 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was -1

8:24:39 PM #33 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

8:25:10 PM #34 CDR -1175 File Cdrdrv.cpp, Line 1236
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00


8:25:10 PM #35 SCSI -1169 File Cdrdrv.cpp, Line 1237
SCSI Exec, HA 2, TA 2, LUN 0, buffer 0x0012AA64
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

8:25:40 PM #36 CDR -1175 File Cdrdrv.cpp, Line 1236
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 55 10 00 00 00 00 00 00 3C 00 00 00


8:25:40 PM #37 SCSI -1169 File Cdrdrv.cpp, Line 1237
SCSI Exec, HA 2, TA 2, LUN 0, buffer 0x0012AA64
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

8:25:40 PM #38 CDR -1169 File WriterStatus.cpp, Line 167
Logical unit not ready, operation in progress

8:25:40 PM #39 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

8:25:40 PM #40 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

8:26:10 PM #41 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 10:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 2:36:01 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Does it maybe have something to do with an SCSI controller?

Als,is there a resorce where I can learn about what the log files are saying.
Any help would be great.
Thanks
Brad
Seattle
[ + quote]
gwendolin
AfterDawn Addict
_ 		18. February 2006 @ 18:42 _ Link to this message    Send private message to this user   
Quote:
Nero version: 6.6.0.1
Your Nero is several versions behind go here and update

http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
Quote:
Physical memory : 511MB (523496kB)
Free physical memory: 79MB (81548kB)
Memory in use : 84 %
You need to free up some memory, shut down all unnecessary progs including spyware while burning

Quote:
Burn process failed at 8x (11,080 KB/s)
Slow burn to 4X
Quote:
Disc Manufacturer: RITEKG - 05
You're using good media and your firmware is current, try these changes and see how you go.

Heres a little about SCSI

SCSI target error

Error code:

Problem:


Solution:

Normally caused by CD-R or CD-RW media the recorder is unable to work with. Or the media could be defective, dirty or just not compatible with the recorder.

Cables are known to cause this: loose cables, damaged cables, loose power connectors, etc.

Defective recorders are known to cause this. Test with another demo software to rule out software as the cause. If two software programs have the same symptom, your recorder may need service.

If the drive is being polled by another software's driver, it could hang the bus. Uninstall any other CD recording software you may have had on your system, as well as Nero. Then use Registry cleaner software to clean you registry. At last try a fresh install of our latest Nero release.

AND A LITTLE MORE

Solution:

If you do a search on SCSI Command Errors, you will find that many others have had the same issue as yours with USB Recorders, regardless of the software used. Meaning, it occurs with Nero, CD Creator, RecordNow, etc.

And the error message varies from SCSI Command Error, Bus Rest, etc...

In most cases, users have found that updating the drivers for the USB Controller resolves the issue. Other found a new External Chassis for the Recorder resolved the issue. And we provided a work around in our MMC.DLL file that causes our software to reissue the command till the recorder is free and accpets, instead of timing out so soon after a lack of response from the device. This resolved the issue for some, but not for others. This MMC.DLL file is part of Nero 6.6.0.3 and above builds.

Try to disconnected all USB devices except for the external DVD burner.

As a last resort, after trying the above solutions and others, they finally connect as an internal to the system and all issues are resolved.






[ + quote]


guide by ScubaPete http://www.dvdplusvideo.com/tutorial007.html Nero guide by alkohol http://www.dvdplusvideo.com/Guides/alkohol_guide3.html

New RipIt4Me + DVD Shrink + ImgBurn guid <==== Rip any DVDs http://forums.afterdawn.com/thread_view.cfm/422740 Guides by bbmayo..... http://webpages.charter.net/bacitup/

This message has been edited since posting. Last time this message was edited on 18. February 2006 @ 19:02
BradBo
Suspended due to non-functional email address
_ 		18. February 2006 @ 21:07 _ Link to this message    Send private message to this user   
Great info.
I will go through it and do these thing.
But actually I was able to burn a dvd.
I went back and opened the Enterprise Edition of Nero,it semmed like it was an older version but the version number was the same.
I was able to brn a dvd with no problem.
Could it be that the Nero Start Smart program is a little different then the Enterprise Bero Burning Rom program is a little different?
Thanks
P.S.
What a relief!
I hated throwing away perfectly good media.
[ + quote]
Advertisement
_ 		__
 
_
gwendolin
AfterDawn Addict
_ 		18. February 2006 @ 21:25 _ Link to this message    Send private message to this user   
Quote:
Enterprise Edition of Nero
I cant say that I've heard of that one, but if it works then I would stick with it. I mainly use NeroVisionExpress, there's a great guide by alkohol in my sig, might be worth a look. Happy burning.
[ + quote]


guide by ScubaPete http://www.dvdplusvideo.com/tutorial007.html Nero guide by alkohol http://www.dvdplusvideo.com/Guides/alkohol_guide3.html

New RipIt4Me + DVD Shrink + ImgBurn guid <==== Rip any DVDs http://forums.afterdawn.com/thread_view.cfm/422740 Guides by bbmayo..... http://webpages.charter.net/bacitup/
afterdawn.com > forums > software specific discussion > nero discussion > my dvd-r's start burn then fail.
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2024 by AfterDawn Ltd.

  IDG TechNetwork