|
|
|
Customizing Target Size ???
|
|
Senior Member
|
1. March 2006 @ 18:42 |
Link to this message
|
|
I currently use Nero Recode & Clone DVD 2.
I always set my target size to DVD5 (4.7 MB)
for regular Single Layer Media.( -R )
If I can customize target size, what should I set it at ??
I've seen other members say they set it to something else, as not to write too close to the edge of disk.
Is this correct ?
I'm not sure but, I think I saw some users say something about setting target to 4.4 MB ?
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
|
Advertisement
|
|
|
|
Member
|
1. March 2006 @ 19:55 |
Link to this message
|
|
Personally, I set the target size to 4300mb which keeps the burned data far enough from the edge where I don't run into read errors when using B Class media.
your conscience doesnt absolve your guilt
|
AfterDawn Addict
|
2. March 2006 @ 00:02 |
Link to this message
|
|
I customized all of my backups anywhere from 4400MB - 4460MB and I have never experienced any playback issues whatsoever. However, I only used genuine media like Taiyo Yuden, Verbatim "advanced azo or datalife plus" and Hitachi Maxell (made in japan).
|
AfterDawn Addict
|
2. March 2006 @ 01:39 |
Link to this message
|
|
I usually set my size to 4384 and I use Taiyo Yuden exclusively! But, now that I know that Alcohol has never had a problem with setting it to 4400-4460 then I might just do that, since I'm using the same discs!
|
Senior Member
|
2. March 2006 @ 09:13 |
Link to this message
|
|
How bout just always leaving it at
4500 ?
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
AfterDawn Addict
|
2. March 2006 @ 09:31 |
Link to this message
|
|
4500MB? Don't know, never tried it, that's way too close to the edge (and or is already at the edge). But like I said, I've always done mine in 4400MB - 4460MB (lately for 4460) and I've never experienced any playback issues.
|
Senior Member
|
2. March 2006 @ 09:50 |
Link to this message
|
|
alright
I'll just set it to 4460, always.
Thanks alkohol
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
AfterDawn Addict
|
2. March 2006 @ 21:11 |
Link to this message
|
@dabig25
You're welcome mate. With 4460MB and you're using authentic Taiyo Yuden, Verbatim "advanced azo" or Hitachi's Maxell (MIJ) media, you won't have any problems at all. According to my knowledge, I strongly believe that any DVD+R is capable of holding 4482MB, but I would never dare to customize mine to 4482MB.
Below is a successful burned log taken from mine with 4461MB (actually it's 4460MB, but Nero showed 4461MB). I recently burned that earlier yesterday. The movie is DOMINO, god damn.. Keira Knightley is good in that movie. I've tested and it played flawlessly without no glitches whatsoever. Did I mentioned that I used Nero Recode 2 with "AA + HQSR" plus "Assign best quality to the Main Movie". Yes, and the quality is great, even with my 55" Widescreen SONY HDTV. I was going to use DVD Rebuilder Pro + CCE SP, but I'm lazy this time. I only use DVD Rebuilder Pro + CCE SP like 10% and Nero Recode 2 like 90% for all of my backups.
Quote:
====== *** Nero Burning ROM, History File *** ======
David X
Home
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX <============ (SERIAL EDITED)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
Recorder: <SONY DVD RW DRU-710A> Version: BYX5 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 594MB (609024kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.3.2006
UDF/ISO compilation
1:57:12 AM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
1:57:13 AM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
1:57:13 AM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:57:13 AM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
1:57:13 AM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
1:57:13 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:57:13 AM #7 Text 0 File Writer.cpp, Line 113
Writer E: SONY DVD RW DRU-710A running
1:57:13 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:57:13 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:57:13 AM #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
1:57:13 AM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2284095 (507:34.45, 4461MB)
1:57:13 AM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:57:13 AM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: SONY DVD RW DRU-710A, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
1:57:13 AM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:57:13 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2284096 (2284096) = #2284096/507:34.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2284096 blocks [E: SONY DVD RW DRU-710A]
--------------------------------------------------------------
1:57:13 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: SONY DVD RW DRU-710A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4677828608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2284096 | lead-out | 1 | 0x41 | 0x00
1:57:13 AM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:57:13 AM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
1:57:13 AM #19 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.
1:57:13 AM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
1:57:13 AM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 4x (5,540 KB/s)
1:57:13 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:57:13 AM #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
1:57:13 AM #24 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD-ROM
Changing the Book Type was finished successfully, return code 0
1:57:13 AM #25 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
1:57:13 AM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
2:11:43 AM #27 Text 0 File WriterStatus.cpp, Line 116
<E: SONY DVD RW DRU-710A> start writing Lead-Out at LBA 2284096 (22DA40h), length 0 blocks
2:11:44 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:12:06 AM #29 Text 0 File DVDR.cpp, Line 5900
Drive: SONY DVD RW DRU-710A
Book Type request [LO], rev 1: DVD+R
Changing the Book Type was finished successfully, return code 0
2:12:06 AM #30 Phase 37 File dlgbrnst.cpp, Line 1725
Burn process completed successfully at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/8/2005 7:33:40 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
movies27
Senior Member
|
3. March 2006 @ 01:34 |
Link to this message
|
i leave my setting at DVD-5 in clone dvd & have never had any problems....
|
Moderator
|
3. March 2006 @ 02:00 |
Link to this message
|
|
had too many problems with crappy discs so i stick at 4300MB, even though i only use top notch media now. am now ploughing thru a couple hundred of bad discs that need reburning and some of them are at the default 4465mb or whatever, but even the 4300mb majority of them are no good, bloody crappy media. ah well only the good stuff gets used now
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
laurenzo
Junior Member
|
3. March 2006 @ 02:15 |
Link to this message
|
|
I have been reading this thread with interest. I notice most advise to set target to 4300, I use NeroVision Express, can someone tell me how to customize to 4300 using N V E thanks.
|
Senior Member
|
3. March 2006 @ 06:08 |
Link to this message
|
|
alkohol
yeah ive been using Verbatim -R & +R booktyped to dvd-rom only.
Thinking bout switching to TY's.
Want to try inkjet printables, gonna get a printer that prints directly onto media.
Thanks Again
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
AfterDawn Addict
6 product reviews
|
4. March 2006 @ 07:43 |
Link to this message
|
dabig25,
personally I prefer verbatim's printable surface over ty's. hub printable verbatim's is all I use anymore and I never have any playback issues. also I can find the verbatim DVD+R hub printables for a little less than the ty DVD+R hub printables.
I primarily use rb/cce for all my backups which has a default target size of about 4432 mb but if I use a different transcoding proggy like shrink, dvdclone, or Nero recode I set the target size to 4430 mb then again I only use grade A media.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
Senior Member
|
4. March 2006 @ 11:02 |
Link to this message
|
|
Mort
Yeah, I've heard that Verb's printable surface is better, than TY's.
I'm leaning toward Verb's, always have much success w/ them.
Never have used printable disc before though.
& there also cheaper than TY's.
AMD Phenom II X4 3.2Ghz
16GB memory
1TB HDD
AnyDVD & CloneDVD
|
AfterDawn Addict
|
5. March 2006 @ 10:17 |
Link to this message
|
dabig25:
I see you are asking about setting the target size using Nero recode,which I recommended to you in another thread for you.
Lorenzo wants to know how to change that target size using Nero vision express.
I'd like to help you both,but I haven't used those programs. Maybe someone will actually answer the original question as well as lorenzo's question?
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
AfterDawn Addict
|
5. March 2006 @ 10:29 |
Link to this message
|
dabig25:
I see you are asking about setting the target size using Nero recode,which I recommended to you in another thread for you.
Lorenzo wants to know how to change that target size using Nero vision express.
Anybody have any info on reducing the targets in those programs/
Here's something I came across. It for nerorecode2: There's a box thast says fit to target size-leave unticked.It should open up a window that says custom. You probably have to go through custom and enter 4360 mbs or something like that?
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!!
|
AfterDawn Addict
|
5. March 2006 @ 11:40 |
Link to this message
|
@saugmon, you are correct with that info
As for Laurenzo, I cant help with that one but I would like to know also.
|
AfterDawn Addict
|
5. March 2006 @ 17:39 |
Link to this message
|
Quote:
I have been reading this thread with interest. I notice most advise to set target to 4300, I use NeroVision Express, can someone tell me how to customize to 4300 using N V E thanks.
@laurenzo & gwendolin
In query to Nero Vision Express 3 or Nero Vision 4, once you've set/clicked on the "make DVD" tab, it "automatically" set to default 4300MB already.
|
AfterDawn Addict
|
5. March 2006 @ 18:34 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 5. March 2006 @ 18:34
|
|
Advertisement
|
|
|
AfterDawn Addict
6 product reviews
|
5. March 2006 @ 18:43 |
Link to this message
|
This probably isn't the right way but when I use NVE (which isn't very often) and exceed the target size, I just save it to a hdd folder and then run it back through recode 2 or similiar. The quality in my experience of avi's isn't very good anyway so I figure it won't hurt to run it through a transcoder to make it fit on a DVD5.
Rig #1 Asus Rampage Formula Mobo, Intel Core2Quad Q9450 CPU @ 3.55ghz, 2gb Corsair DDR2 1066 Dominator Ram @ 5-5-5-15, TR Ultra 120 Extreme w/ Scythe 9 blade 110 cfm 120mm Fan HSF, HIS Radeon 512mb HD3850 IceQ TurboX GPU, Corsair 620HX P/S, CM Stacker 830 Evo Case, Rig #2 Asus P5W DH Deluxe Mobo, Intel C2D E6600 CPU @ 3.6ghz, 2gb Corsair XMS2 DDR2 800 Ram @ 4-4-4-12-2t, Zalman CNPS9500LED HSF, Sapphire Radeon X850XT PE GPU, Corsair 620HX P/S, Cooler Master Mystique Case, Viewsonic 20.1" Widescreen Digital LCD Monitor, Klipsch Promedia Ultra 5.1 THX Desktop Speakers, http://valid.x86-secret.com/show_oc.php?id=348351 http://valid.x86-secret.com/show_oc.php?id=236435 |
|
