|
|
|
Good burn...but still doesn't work
|
|
|
sierra997
Newbie
|
20. March 2006 @ 12:18 |
Link to this message
|
|
Hi. I had been making backups of my DVD's for months and months using DVD-Shrink or DVD Decrypter with Nero 6.6.0.18 and never really had a problem.(using sony DVD-R) Recently things have gone bad. I starting getting nothing but coasters caused by a "Reset occured" error. I tried sony and verbatim DVD's and still no luck. After much reading, here is what I have tried (with a failed burn after each step, most times it was failing durning the simulation which then hangs my computer):
- removed all burning software, cleaned registry and reinstalled DVD-Shrink, DVD Decrypter and Nero 6.6.0.18
- removed Nero 6.6.0.18 and went back to version 6.6.0.16
- verified my drive is at the latest revision which it was, but did it again anyways to be sure
- Nero stated that my ASPI was corrupt so I tried installing aspi_471a2, but Nero still said it was corrupt. So I installed ForceASPI_v17.
I have now had three successfull burns (as per Nero), but my DVD player won't play them. I tried a DVD I copied before my trouble started and it still plays fine.
I have included the log from my last attempt. Not sure if much can be gained from it as it did complete successfull. But any help thoughts would be appreciated. The only thing I can think of is that my drive no longer works?????
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/20/2006 1:47:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <NU DVDRW DDW-082> Version: B377 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <NU DVDRW DDW-082 >Version: B377 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : NU DVDRW DDW-082 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
NU DVDRW DDW-082 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 204MB (209764kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.3.2006
UDF/ISO compilation
1:52:01 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
1:52:02 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
1:52:02 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:52:02 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
1:52:02 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
1:52:02 PM #6 Text 0 File Writer.cpp, Line 122
Writer NU DVDRW DDW-082 running
1:52:02 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:52:02 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:52:02 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:52:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
1:52:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
1:52:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: NU DVDRW DDW-082, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
1:52:02 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:52:02 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [NU DVDRW DDW-082]
--------------------------------------------------------------
1:52:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
1:52:02 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:52:02 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
1:52:02 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:52:02 PM #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)
1:52:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:52:12 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
1:52:12 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Seamless Link -> ON
1:52:12 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
1:52:12 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:21:11 PM #25 Text 0 File WriterStatus.cpp, Line 116
<NU DVDRW DDW-082 > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
2:21:11 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:21:12 PM #27 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2286111
2:21:34 PM #28 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 2x (2,770 KB/s)
2:21:35 PM #29 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
2:21:35 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:21:35 PM #31 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
2:21:35 PM #32 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Seamless Link -> ON
2:21:35 PM #33 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
2:21:35 PM #34 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:50:04 PM #35 Text 0 File WriterStatus.cpp, Line 116
<NU DVDRW DDW-082 > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
2:50:04 PM #36 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:50:04 PM #37 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2286111
2:50:13 PM #38 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/20/2006 1:47:24 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/6/2005 1:45:36 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Senior Member
|
20. March 2006 @ 14:17 |
Link to this message
|
Quote:
1:52:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
you are writin very close to the edge of the disk try reducing dvd shrinks target size to 4300mb you'll find it under edit and preferences ghange to custom and set in 4300
have you tried using DVD Decrypter to burn an iso file from shrink that would take Nero out of the loop thus eliminating any Nero issue
|
|
sierra997
Newbie
|
21. March 2006 @ 18:18 |
Link to this message
|
I created an ISO file with DVD-Shrink and then burnt it at 4x speed to a verbatim DVD-R using DVD Decrypter. It said that it completed successfull, but it won't play in my DVD player (It just spins and spins) or in my computer.(I only have the one DVD drive in it) I double checked, and yes, my DVD player still plays the previous DVD's that I copied.
I didn't set the size of the ISO file to 4300MB. So I guess I will try that next. I'm getting really frustrated!! It's got to be either a bad batch of verbatim DVD's or my DVD writer has packed it in?????
|
Senior Member
|
21. March 2006 @ 18:32 |
Link to this message
|
|
Didn't they just introduce -media ability to that drive. Before I decided it was packing it in I would try with +media. If it works ok with + then maybe wait on another firmware update
|
|
sierra997
Newbie
|
22. March 2006 @ 05:51 |
Link to this message
|
No it has always had DVD-R support, they may have just added more supported media to it. The latest firware release was 2004, so I think that might be it for updates. When I first started using this drive, I was using Memorex DVD-R's with unreliable results. So I switched to Sony DVD-R's and things were good.(about 20-30 good burns)Then I started getting some that would fail and some that would work. Eventually I ran out of Sony so I bought some Verbatim DVD-R's as I heard these were a good brand. So far I have only got about 2 out of 10 to work. (like I mentioned earlier, a lot of times it was failing even durning the simulation)
I'm going to go buy a DVD-RW before I go any further. I just don't know what brand to buy??????? I have never used a DVD-RW before. Do I need to format it or anything or is it ready to use out of the case?
Thanks for all and any help....
|
|
sierra997
Newbie
|
22. March 2006 @ 09:27 |
Link to this message
|
Well I bought some Sony DVD-RW's (RITEKW - 01). When I tried to use Nero at 2X to burn DVD files that were 4216MB it completed successfully. But when I try to play it in my DVD player it says disk error. Ok, maybe it won't play DVD-RW's. So I tried to play it in my computer and it won't recognize the disk either. In windows explorer, it says that drive is not accesible. When I did a disk info in Nero it says the disk is empty. By looking at the disk it does look like something got written to it.
Any thoughts? DVD drive at fault? I included the log file of this burn below. Thanks....
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 3/20/2006 1:47:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <NU DVDRW DDW-082> Version: B377 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <NU DVDRW DDW-082 >Version: B377 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HDS722516VLAT80 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : NU DVDRW DDW-082 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
NU DVDRW DDW-082 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 121MB (124136kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.3.2006
UDF/ISO compilation
12:31:00 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
12:31:00 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
12:31:00 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:31:00 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
12:31:00 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
12:31:00 PM #6 Text 0 File Writer.cpp, Line 122
Writer NU DVDRW DDW-082 running
12:31:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:31:00 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:31:00 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:31:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2159375 (479:51.50, 4217MB)
12:31:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:31:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: NU DVDRW DDW-082, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
12:31:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:31:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2159376 (2159376) = #2159376/479:51.51
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2159376 blocks [NU DVDRW DDW-082]
--------------------------------------------------------------
12:31:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [NU DVDRW DDW-082] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4422402048, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2159376 | lead-out | 1 | 0x41 | 0x00
12:31:01 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:31:01 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
12:31:01 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:31:01 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
12:31:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:31:01 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
12:31:01 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Seamless Link -> ON
12:31:01 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
12:31:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:58:05 PM #25 Text 0 File WriterStatus.cpp, Line 116
<NU DVDRW DDW-082 > start writing Lead-Out at LBA 2159376 (20F310h), lenght 0 blocks
12:58:05 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:58:05 PM #27 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 2159375
12:58:05 PM #28 Phase 181 File dlgbrnst.cpp, Line 1832
Writing lead-out...
12:58:05 PM #29 Text 0 File DVDR.cpp, Line 2807
Estimated time for 30mm Borders: 0min 00sec
12:58:41 PM #30 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 3/20/2006 1:47:24 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/6/2005 1:45:36 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
22. March 2006 @ 09:35 |
Link to this message
|
Man... Nu-Global don't offer much support at there site huh? I just searched there site for info on this drive. They don't have much info there. I did find this though.
support DVD-R list
CMC CMCMAG. 2X DVD-R
CMC CMCMAG.AF1 4X DVD-R
Gigistorage GSC002 4X DVD-R
Maxell MXLRG01 2X DVD-R
Maxell MXLRG02 4X DVD-R
Mitsubishi MCC01RG20 4X DVD-R
Optodisc OPTODISCR004 4X DVD-R
Princo PRINCO 4X DVD-R
Ritek RITEKG03 2X DVD-R
Ritek RITEKG04 4X DVD-R
TaiyoYuden TYG01 4X DVD-R
TDK TDKG02000000 2X DVD-R
TDK TTG01 4X DVD-R
That does not look very promising. I thought I had read before about a 379 update but could not find anything about one.
Only ones on that list I would have faith in are Taiyo Yuden and maybe the Ritek.
|
Senior Member
|
22. March 2006 @ 20:41 |
Link to this message
|
all I can suggest is basicly what whompas said give verbatim or taiyos a go Nero certainly thought it burnt a disc and I cant see anything wrong in the log Just checked on the firmware no later version seems to be available
|
|
sierra997
Newbie
|
23. March 2006 @ 07:19 |
Link to this message
|
Verbatim DVD-R's was what I was originally using which was not working for me. So I tried Sony DVD-RW and no go either. I tried burning some music to a Sony CD-R and it works fine. Does anyone know if the same laser is used for CD's and DVD's or are there two different ones in a CD/DVD drive?
Cheers....
|
Senior Member
|
23. March 2006 @ 13:44 |
Link to this message
|
|
hi :)
yes there are 2 lasers one for cd one for dvd
 gif by ireland
we cant help if you wont help yourself |
|
sierra997
Newbie
|
23. March 2006 @ 15:27 |
Link to this message
|
Soooooo.......I guess since I'm using good media (verbatim) and the DVD burner thinks it made a good copy, but yet doesn't recognize it afterwards, the DVD drive must be at fault?
The thing that confuses me is, for a while Nero was failing durning the simulation. Then after much tinkering, it now completes the simulation and burn successfull, yet the DVD's don't work.
|
Senior Member
|
23. March 2006 @ 15:49 |
Link to this message
|
|
my last suggestion would be to try your burner in another machine where the verbatim dvd-r's 16x I've come across a couple of posts where this media has been giving some burners trouble
|
|
pulpo40
Newbie
|
23. March 2006 @ 16:21 |
Link to this message
|
|
I the same problem,buy new burn player its fixed.
|
|
sierra997
Newbie
|
25. March 2006 @ 06:31 |
Link to this message
|
|
Ok. I'm going to buy a new burner. Any suggestions on brand/model that will give me the most success with different brands of media?(including DVD-+R and -+RW)
|
|
Advertisement
|
|
|
Senior Member
|
25. March 2006 @ 12:13 |
Link to this message
|
|
Personaly I've allways used pioneer and have been happy with them but if you want other members suggestions post a new thread under pc hardware dvd+-drives
|
|
