|
|
|
PMA Update Failure? Please help.
|
|
|
wsphish
Newbie
|
30. March 2006 @ 18:33 |
Link to this message
|
|
Hello,
I have burned probably 150+ dvd's with my USB 2.0 LG GSA-5163D external dual layered burner. I run Windows XP Pro SP2 and use Nero 6.6.1.4 Burning Rom (I was using a slightly older version when the problem started and upgraded in hopes of a fix). I have recently upgraded my firmware (problem began before the upgrade). I can still burn dvd's in my internal drive, so I do not believe it is a software issue. I receive the PMA Update failure whether I use a Memorex DVD +R DL or a Verbatim 4.7gb. I attempted to burn different filesets (Video TS folders) so it would not be an issue with the data I am burning. I am running a pentium 4, 1.6mhz with 768MB RAM. Do you think my burner is simply finished, or is there something else going on here? I am trying to be thorough, but I am sure I have left something major out. Below is my Nero Log. I will post both the DL log and the 4.7gb log. Any help will be appreciated! Thanks, Rich
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-5163D D: CDRom2
LITE-ON DVDRW LDW-411S E: CDRom0
LITE-ON LTR-48246S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785712kB)
Free physical memory: 544MB (557464kB)
Memory in use : 29
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.3.2006
UDF/ISO compilation
10:21:48 PM #1 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 983
Backup file 'VIDEO_TS.BUP' should be identical to 'VIDEO_TS.IFO'
10:21:48 PM #2 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 983
Backup file 'VTS_01_0.BUP' should be identical to 'VTS_01_0.IFO'
10:21:48 PM #3 Phase 117 File dlgbrnst.cpp, Line 1685
DVD-Video files compliance test failed
10:21:52 PM #4 Phase 132 File dlgbrnst.cpp, Line 1685
DVD-Video files compliance ignored
10:21:52 PM #5 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:21:52 PM #6 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:21:52 PM #7 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
10:21:52 PM #8 Text 0 File Reader.cpp, Line 124
Reader running
10:21:52 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:21:53 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:21:53 PM #11 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:21:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3416799 (759:17.24, 6673MB)
10:21:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:21:53 PM #14 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
10:21:53 PM #15 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:21:53 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3416800 (3416800) = #3416800/759:17.25
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3416800 blocks [HL-DT-ST DVDRAM GSA-5163D]
--------------------------------------------------------------
10:21:53 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6997606400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3416800 | lead-out | 1 | 0x41 | 0x00
10:21:53 PM #18 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:21:53 PM #19 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:21:53 PM #20 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
10:21:53 PM #21 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
10:21:53 PM #22 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
10:22:02 PM #23 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3,324 KB/s)
10:22:02 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:22:53 PM #25 SPTI -1194 File SCSIPassThrough.cpp, Line 289
D: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0xBF 00 00 00 00 00 00 20 00 0C 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 35 20 00 0E 73 04
Buffer x02de8200: Len xc
0x00 0A 00 00 00 00 00 00 00 1A 11 70
10:22:53 PM #26 Text 0 File DVDPlusDualLayer.cpp, Line 642
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
10:22:53 PM #27 CDR -1194 File ThreadedTransferInterface.cpp, Line 1799
PMA update failure
D: HL-DT-ST DVDRAM GSA-5163D
10:22:53 PM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
10:22:53 PM #29 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Log for the 4.7gb Verbatim failure:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-5163D D: CDRom2
LITE-ON DVDRW LDW-411S E: CDRom0
LITE-ON LTR-48246S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 52428800 (52428800) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785712kB)
Free physical memory: 285MB (291980kB)
Memory in use : 62
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.3.2006
UDF/ISO compilation
10:32:01 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
10:32:01 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
10:32:01 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:32:02 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
10:32:02 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
10:32:02 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:32:02 PM #7 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-5163D running
10:32:02 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:32:02 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:32:02 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:32:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2222559 (493:54.09, 4340MB)
10:32:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:32:02 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
10:32:02 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:32:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2222560 (2222560) = #2222560/493:54.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2222560 blocks [HL-DT-ST DVDRAM GSA-5163D]
--------------------------------------------------------------
10:32:02 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4551802880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2222560 | lead-out | 1 | 0x41 | 0x00
10:32:02 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:32:02 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:32:02 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
10:32:02 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
10:32:02 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
10:32:02 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
10:32:02 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:32:02 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
10:32:02 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
10:32:02 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:33:13 PM #27 SPTI -1194 File SCSIPassThrough.cpp, Line 289
D: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 38 00 0C 73 04
Buffer x04530000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10:33:13 PM #28 CDR -1194 File Writer.cpp, Line 311
PMA update failure
D: HL-DT-ST DVDRAM GSA-5163D
10:33:13 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:33:13 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:33:13 PM #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1
10:33:33 PM #32 CDR -1194 File WriterStatus.cpp, Line 167
PMA update failure
D: HL-DT-ST DVDRAM GSA-5163D
10:33:33 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:33:33 PM #34 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
AfterDawn Addict
|
30. March 2006 @ 21:30 |
Link to this message
|
Quote:
Nero Version: 6.6.1.4
This particular version of Nero has certain bugs causing a few problems. I recommend you uninstall that version, run this clean tool to remove all traces
http://ww2.nero.com/nero6/en/Clean_Tools.html
and then install this older bug free version from one of these links
http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe
Both logs look pretty clean except for the Verbatim log, you are burning at 16X which is far too fast, slow to 4X.
You are using good quality media in both cases so hopefully the re install of Nero will overcome your problem, good luck.
Quote:
whether I use a Memorex DVD +R DL
Please do yourself a favour dont use Memorex. The discs used in the first burn show Ritek which are OK.
This message has been edited since posting. Last time this message was edited on 30. March 2006 @ 21:32
|
|
wsphish
Newbie
|
31. March 2006 @ 03:39 |
Link to this message
|
Thanks for the help Gwendolin. Unfortunately that has not corrected my situation. I ran the Nero Cleaner, installed version 6.6.0.18 (I used to run the 6.6.0.15 without a glitch and then this problem started, which is why I upgraded to the most current version). I will paste the new logs in case there is info that might help determine the problem. As far as the Ritek disc, I am definitely using a Memorex branded +R DL disc. Is it possible that Ritek made it for Memorex?
One other thing I should mention...a little while back I attempted to burn a PAL video ts folder by "converting" it to NTSC by changing the headers of the ifo file. I've done this before successfully. It seems like something went wrong in that burn and the disc would not play or read in any player I tried it in (even though it burned "successfully" in this recorder). I remember when I tried playing it in this recorder, it hung the burner for a bit. I read somewhere that trying to read a disc with errors can cause a controller to revert to "PIO" and if you change it back to DMA, that could solve problems, but in my case the controllers are still on DMA. Since this is a USB 2.0 drive, do I need to be looking elsewhere for a DMA setting. Could the problem I am having have something to do with that burn or subsequent read attempt? I'm not sure how soon after this occurred that I started to have the problem. FYI - The drive will read dvd's fine at this point, it just won't burn. Thanks for the assistance!
Rich
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW LDW-411S >Version: FS0K - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-411S E: CDRom0
LITE-ON LTR-48246S F: CDRom1
HL-DT-ST DVDRAM GSA-5163D D: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785712kB)
Free physical memory: 473MB (485044kB)
Memory in use : 38
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.3.2006
UDF/ISO compilation
8:20:46 AM #1 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 974
Backup file 'VIDEO_TS.BUP' should be identical to 'VIDEO_TS.IFO'
8:20:46 AM #2 DVDREALLOC 5 File DVDVideoCompilation.cpp, Line 974
Backup file 'VTS_01_0.BUP' should be identical to 'VTS_01_0.IFO'
8:20:46 AM #3 Phase 117 File dlgbrnst.cpp, Line 1832
DVD-Video files compliance test failed
8:20:48 AM #4 Phase 132 File dlgbrnst.cpp, Line 1832
DVD-Video files compliance ignored
8:20:49 AM #5 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:20:49 AM #6 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:20:49 AM #7 Text 0 File Reader.cpp, Line 127
Reader running
8:20:49 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:20:49 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:20:49 AM #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:20:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3416799 (759:17.24, 6673MB)
8:20:49 AM #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:20:49 AM #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
8:20:49 AM #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:20:49 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3416800 (3416800) = #3416800/759:17.25
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3416800 blocks [HL-DT-ST DVDRAM GSA-5163D]
--------------------------------------------------------------
8:20:49 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6997606400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3416800 | lead-out | 1 | 0x41 | 0x00
8:20:49 AM #17 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:20:50 AM #18 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:20:50 AM #19 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:20:52 AM #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
8:20:52 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:21:44 AM #22 SCSI -1194 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04C70800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x0C 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x20 0x00 0x0E 0x73 0x04
8:21:44 AM #23 Text 0 File DVDPlusDualLayer.cpp, Line 639
L0 Data Zone Capacity not set.
Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB)
8:21:44 AM #24 CDR -1194 File ThreadedTransferInterface.cpp, Line 1778
PMA update failure
8:21:44 AM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
8:21:45 AM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVDRAM GSA-5163D>Version: A105 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW LDW-411S >Version: FS0K - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-411S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-48246S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-411S E: CDRom0
LITE-ON LTR-48246S F: CDRom1
HL-DT-ST DVDRAM GSA-5163D D: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785712kB)
Free physical memory: 402MB (412020kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.3.2006
UDF/ISO compilation
8:24:00 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
8:24:00 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
8:24:00 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:24:00 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:24:00 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
8:24:00 AM #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-5163D running
8:24:00 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:24:01 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:24:01 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:24:01 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2222559 (493:54.09, 4340MB)
8:24:01 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:24:01 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-5163D, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
8:24:01 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:24:01 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2222560 (2222560) = #2222560/493:54.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2222560 blocks [HL-DT-ST DVDRAM GSA-5163D]
--------------------------------------------------------------
8:24:01 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-5163D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4551802880, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2222560 | lead-out | 1 | 0x41 | 0x00
8:24:01 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:24:01 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:24:01 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:24:01 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
8:24:01 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:24:01 AM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
8:24:01 AM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
8:24:01 AM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
8:24:01 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:24:29 AM #25 SCSI -1194 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04290000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x32 0x38 0x00 0x0C 0x73 0x04
8:24:29 AM #26 CDR -1194 File Writer.cpp, Line 311
PMA update failure
8:24:29 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:24:29 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:24:30 AM #29 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
8:24:30 AM #30 CDR -1194 File WriterStatus.cpp, Line 167
PMA update failure
8:24:30 AM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
8:24:30 AM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:13 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
