|
|
|
Another DVD Shrink Error
|
|
|
needs
Suspended permanently
|
4. April 2006 @ 08:25 |
Link to this message
|
|
Any help would be much appreciated.
It stopped working recently, and one of the members here advised me to update my firmware, Nero and to turn on the DMA.
I did all of that and it started working again, but I'm now getting more error messages.
Here's the log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 5/26/2003 11:33:58 PM
ahead WinASPI: File 'C:\Downloads\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Downloads\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : KU2412P HEL189T 2.0B vaxscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B D: CDRom0
_NEC DVD+RW ND-1100A E: CDRom1
Generic DVD-ROM G: CDRom2
KU2412P HEL189T F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523264kB)
Free physical memory: 112MB (114860kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.2.2003
NeroAPI
2:15:50 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:15:50 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:15:50 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:15:50 AM #4 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00D55400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
2:15:50 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
2:15:50 AM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+RW ND-1100A running
2:15:50 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:15:50 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:15:51 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:15:51 AM #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:15:51 AM #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2128607 (473:01.32, 4157MB)
2:15:51 AM #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:15:51 AM #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R
2:15:51 AM #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:15:51 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2128608 (2128608) = #2128608/473:1.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2128608 blocks [_NEC DVD+RW ND-1100A]
--------------------------------------------------------------
2:15:51 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4359389184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2128608 | lead-out | 1 | 0x41 | 0x00
2:15:51 AM #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:15:51 AM #18 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:15:51 AM #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:15:51 AM #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
2:15:51 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:15:51 AM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07BD0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
2:15:51 AM #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00D55400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
2:15:52 AM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
2:16:21 AM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x015D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
2:16:21 AM #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error
2:16:21 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:16:21 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:16:22 AM #29 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
2:16:22 AM #30 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
2:16:22 AM #31 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00D55400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
2:16:22 AM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
2:16:22 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:16:22 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 1:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/27/2005 7:12:48 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Member
|
4. April 2006 @ 08:57 |
Link to this message
|
|
Hi there @needs. Did you recently change the type of media you are using? Like lacquer finish or mirror? There are a few other posts throughout AD which describe the same thing. Some drives don't like mirror fronts and won't burn. Try a solid color front.
Who is that shadowy figure?
 |
|
needs
Suspended permanently
|
4. April 2006 @ 09:00 |
Link to this message
|
|
Nah, same good quality Verbatim I've always used.
Needs
Black PS2 V9 - Ripper 2 Gold Chip
Silver Slim PS2 V12 - Muppet Chip - Sub Zero Laser Fix
|
Member
|
4. April 2006 @ 09:20 |
Link to this message
|
Who is that shadowy figure?
|
Senior Member
|
4. April 2006 @ 10:11 |
Link to this message
|
|
Just an FYI: The shiny top/"lacquer" finishes are top quality media too (Verbatim or TY, of course).
Latest AnyDVD to rip > VOBB to blank the unwanted on a DVD > Shrink to compress > ImgBurn to burn = Never starting a thread asking how to backup a movie
|
Member
|
4. April 2006 @ 10:54 |
Link to this message
|
|
Hi @Mr.Pink. I see many people seem to choose verbatims and the TY. What's the difference between media's? Besides of course book type? I've used any variety of on-the-cheap brands for about 4 years now and never had a problem with any of them. Are they made differently?
Who is that shadowy figure?
|
|
needs
Suspended permanently
|
4. April 2006 @ 20:00 |
Link to this message
|
|
Still no luck.....
Needs
Black PS2 V9 - Ripper 2 Gold Chip
Silver Slim PS2 V12 - Muppet Chip - Sub Zero Laser Fix
|
AfterDawn Addict
|
4. April 2006 @ 20:50 |
Link to this message
|
Seems to me your Nero may be damaged or corrupted. At any rate your SCSI error is this:
INVALID COMMAND OPERATION CODE
I figure that out from the bit of code in the error:
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
Then I go to my chart which has all these listed.
http://www.isobuster.com/isobuster/help/hs305.htm
Nero sends out commands (requests) to your DVD drive and if what Nero sends does not make sense to your drive then your drive(The SCSI device) tells Nero (or anyone else thats listening) that the command is invalid.
At this point Nero wants to know how much space is available in the drive's read buffer. That's what it's trying to ask. This error is simply your drive telling Nero "I can't understand you!
All the other errors that follow are the result of a sort of cascading effect, the first error causes another error and so on. Like a big car wreck. I tend to ignore subsequent error messages until the first one is corrected.
Nero gets screwed up on occasion, sometimes things get moved around or inadvertently deleted. The thing to do at this point is to remove and reinstall the program. But first you may want to try Nero's Registry Checker and Driver Cleaner tools.
http://nero.com/nero6/enu/Clean_Tools.html
Sometimes simply getting the registry settings back in order will solve this type of error.
The driver cleaner will make a list of any conflicting drivers. If there are none you will not see anything happen when you click the tool's .exe to start it. Maybe just a quick flash.
If these don't help then remove and reinstall Nero, using the General Clean Tool. You may want to install Nero in your Program Files Directory as well. That's the normal spot.
It could also be a problem with your drive. You may want to test it with a different program, DVD Decrypter is good for that sort of thing.
Let us know...
Cheers,
Frank
This message has been edited since posting. Last time this message was edited on 4. April 2006 @ 21:10
|
|
needs
Suspended permanently
|
5. April 2006 @ 04:00 |
Link to this message
|
I tried the registry cleaner and driver cleaner tools but no luck.
I'll try reinstalling Nero using the general clean tool.
Here's the latest log in case you need to see it:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 5/26/2003 11:33:58 PM
ahead WinASPI: File 'C:\Downloads\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Downloads\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : KU2412P HEL189T 2.0B vaxscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B D: CDRom0
_NEC DVD+RW ND-1100A E: CDRom1
Generic DVD-ROM G: CDRom2
KU2412P HEL189T F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523264kB)
Free physical memory: 110MB (113368kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.2.2003
NeroAPI
9:54:50 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
9:54:50 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
9:54:51 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:54:51 PM #4 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06FA5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:54:51 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
9:54:51 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:54:51 PM #7 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+RW ND-1100A running
9:54:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:54:51 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:54:51 PM #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:54:51 PM #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286047 (508:00.47, 4464MB)
9:54:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
9:54:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R
9:54:51 PM #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:54:51 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286048 (2286048) = #2286048/508:0.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286048 blocks [_NEC DVD+RW ND-1100A]
--------------------------------------------------------------
9:54:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681826304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286048 | lead-out | 1 | 0x41 | 0x00
9:54:51 PM #17 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
9:54:52 PM #18 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
9:54:52 PM #19 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
9:54:52 PM #20 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
9:54:52 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:54:52 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0CAA0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
9:54:52 PM #23 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06FA5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:54:52 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
9:55:17 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
9:55:17 PM #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error
9:55:17 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:55:17 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:55:17 PM #29 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
9:55:17 PM #30 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
9:55:17 PM #31 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06FA5400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
9:55:17 PM #32 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)
9:55:17 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:55:17 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 7/15/2005 1:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/27/2005 7:12:48 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for your help so far.
Needs
Black PS2 V9 - Ripper 2 Gold Chip
Silver Slim PS2 V12 - Muppet Chip - Sub Zero Laser Fix
|
Member
|
5. April 2006 @ 04:12 |
Link to this message
|
Hi @needs, I know you stated you use top quality discs, but even the best of manufacturers have shipped bad press's. Meaning, it's possible you may have received a bad batch of discs. Just out of curiosity have you tried picking up a single or maybe a five pack of another type of manufactured DVD-R. I had a similar problem. I tried another disc and everything worked fine. I did the same stuff you did. Cleaned the reg, updated the firm. re-installed Nero, even went as far as going back to old 6.6. I tried everything and was sure it was the drive. Until somebody told me to just try another kind of disc. For sure that's what it wasy. Just a last ditch option. Hope everything works out for you.
Who is that shadowy figure?
|
|
Car.Mike
AfterDawn Addict
|
5. April 2006 @ 05:55 |
Link to this message
|
needs
Are you using Hacked firmware as Nec's site is showing firmware 1.A3 but you are using 10GE? Or is this burner an OEM?
Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE
|
AfterDawn Addict
|
5. April 2006 @ 17:42 |
Link to this message
|
|
This log has a Power Calibration error. That points to a drive problem.
This message has been edited since posting. Last time this message was edited on 5. April 2006 @ 17:58
|
|
needs
Suspended permanently
|
5. April 2006 @ 21:00 |
Link to this message
|
This is where I got my firmware: http://tinyurl.com/kmk2k
I reinstalled Nero (got version 7 premium). I used it to make a data CD and it worked fine.
It's still not working with DVD Shrink (Nero) but I can use DVD Decryptor, I just select create ISO and burn with DVD Decryptor, works fine.
Needs
Black PS2 V9 - Ripper 2 Gold Chip
Silver Slim PS2 V12 - Muppet Chip - Sub Zero Laser Fix
|
Moderator
|
6. April 2006 @ 04:21 |
Link to this message
|
@needs -
thread teleported to Nero forum :)
Quote:
Recorder: <_NEC DVD+RW ND-1100A> Version: 10GE
- looks like you have a DELL OEM drive; just checked Dell's site, 10GE is dated 25/04/2003!!. As far as i'm aware, 10GE was the latest update for this burner...so it's way old now...
Quote:
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R
- your blank discs aren't being recognised, due to the firmware being so old. this is similar to what you should see - Quote:
Recorder: HL-DT-ST DVD-RW GWA-4082N, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
- ie a 3line paragraph when the firmware's up to date.
Have done some searching on my old posts regarding old NEC burners such as yours...
(here's a link to one of them, at the very least it reminded me of a fun thread - http://forums.afterdawn.com/thread_view.cfm/3/197820)
Anyway, the standard 1100A can manage the following = 4 DVD+R, 2.4 DVD+RW
From looking here - http://herrie.org/upgrdr.html the 1100A can be morphed into a 1300A, (ie via firmware update you can wring a little more life out of this burner, but not a great deal as 4x discs are becoming more scarce now) but it's a 50% success rate for either (i interpret the success rate to mean 50% success rate of burning to media at the newer speeds of the 1300A firmware, not 50% chance of the firmware upgrade itself working).
if you morph this old drive into a 1300A, you have access to the following new capabilities - 4.0x DVD-R & 2.0x DVD-RW
Basically firmware is what 'teaches' a drive about makes of media, burn speeds, how to interpret media etc etc, and your drive is just not recognising that media as the firmware is (probably current) however very old and the discs you're trying to use are newer than the burner is equipped to recognise/use.
Also, Quote:
Existing drivers:
- the ATAPI drivers aren't loaded correctly as they're not listed in this section, fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 6. April 2006 @ 04:27
|
Member
|
6. April 2006 @ 04:25 |
Link to this message
|
|
Creaky is right @needs, as I had said, it's the media. I too was able to successfully burn cd's but not on that specific dvd media I was using.
Who is that shadowy figure?
|
|
needs
Suspended permanently
|
6. April 2006 @ 14:34 |
Link to this message
|
I just tried using Nero to make a data DVD, using a good quality Verbatim, and yup it wouldn't recognise it, yet it worked fine with some crappy old 'Laser' brand discs. I use the cheap Laser discs for data; movies and games won't work on them.
It's weird how I can still use DVD Decryptor and Alcohol 120% to burn to the same Verbatim media though, and get perfect results.
I'll try morphing the drive into a 1300A and install my ATAPI driver correctly.
I appreciate all this guys, thanks heaps. I'll post the results when I get it done.
Edit: OK, how do I go about changing the drive to a 1300A? That page only listed possibilities, didn't have any guides/firmware downloads.
I also couldn't see on this page.......... http://home.comcast.net/~bbmayo/FAQ.htm.........how to reinstall the ATAPI driver.
Needs
Black PS2 V9 - Ripper 2 Gold Chip
Silver Slim PS2 V12 - Muppet Chip - Sub Zero Laser Fix
This message has been edited since posting. Last time this message was edited on 6. April 2006 @ 14:46
|
|
Car.Mike
AfterDawn Addict
|
6. April 2006 @ 14:38 |
Link to this message
|
|
needs,
The reason you can not write to Verbatim is because the burner does not recog that media as ther is no MID code written for it. You can get a burner for $40.00-50.00 US. The burner should be a d/l (-) and (+) burner. That burner you have is really old and NEC figures it would die so why write the code
|
|
needs
Suspended permanently
|
7. April 2006 @ 06:06 |
Link to this message
|
Why does it burn to the same Verbatims when I use DVD Decryptor or Alcohol 120% though?
Needs
Black PS2 V9 - Ripper 2 Gold Chip
Silver Slim PS2 V12 - Muppet Chip - Sub Zero Laser Fix
|
|
Car.Mike
AfterDawn Addict
|
7. April 2006 @ 06:29 |
Link to this message
|
|
needs ,
I take a guess at this since I am not the programmer at Nero. Evidentially Nero needs to code so the burner along w/ the program will operate properly. If It works w/ DVDDecrypter then use that to burn
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 10:02
|
AfterDawn Addict
|
7. April 2006 @ 09:35 |
Link to this message
|
So a pack of 100 Verbatims cost about as much as a new burner.
I mean, new burners are getting cheaper than the media we use. I spend more on media than I do anything else and yet I put in a new burner every three or four months. (Addicted to Pioneer burners)
It's something to consider. It would probably make all your problems go away.
Sale price Verbs, $35.99 @supermediastore:
Sale price NEC ND-3550A, 34.95 Also at supermediastore
|
|
needs
Suspended permanently
|
7. April 2006 @ 19:24 |
Link to this message
|
|
Well I suppose I'll have to bite the bullet and get a new burner.
Thank you very, very much for all your help boys, really appreciate it.
Needs
Black PS2 V9 - Ripper 2 Gold Chip
Silver Slim PS2 V12 - Muppet Chip - Sub Zero Laser Fix
|
Moderator
|
8. April 2006 @ 04:25 |
Link to this message
|
|
no worries, let us know how you get on..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Advertisement
|
|
|
|
Car.Mike
AfterDawn Addict
|
8. April 2006 @ 06:10 |
Link to this message
|
|
needs,
Do look at what FastFrank posted as NEC is good
|
|
