SATA stops CD booting


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Wednesday 11.2.2026 / 00:54

Search AfterDawn Forums:

afterdawn.com > forums > pc hardware > other pc hardware > sata stops cd booting

Browse by topic

Forums

Start a new thread

SATA stops CD booting

Jump to:

Posted

Message

punejabe

Newbie

7. April 2006 @ 05:09

Link to this message

Since installing my new chipset, when i plug my SATA hard drive in the windows home cd refuses to boot and hangs on "Setup is ... hardware configurations" just after you press enter to boot from the disk. if i unplug the SATA and just use my other IDE hardrive, it boots the windows home cd fine and will go all the way through the setup.

Any ideas?

[ + quote]

BigDK

Senior Member

3 product reviews

7. April 2006 @ 06:52

Link to this message

Can you clarify what it is you actually installed.
By installed new chipset, do you mean you upgraded the chipset drivers on the motherboard, and if so, did the SATA drive work okay on the old drivers.
Or do you mean that you have just plugged the SATA in for the first time, and have just used that part of the chipset for the first time.
What Mobo are you using and what SATA drive.
Is the board/chipset SATA 2 capable and is the drive also SATA 2, some SATA 2 drives have problems working with SATA 1 chipset controllers and need to be have tweaks done to them.
Have you also made the RAID boot disk for the F6 prompt and set the BIOS correctly to enable the SATA ports?

[ + quote]

punejabe

Newbie

7. April 2006 @ 07:09

Link to this message

I used to have the Maxtor Diamond 10 300GB SATA 7200 harddrive rigged up with a:

AMD Athlon XP 2800+ Barton
1GB & 2x512MB Crucial DDR400 RAM
Connect3D 9800Pro 128MB AGP8x
MSI K7N2 Delta-ILSR

Worked fine had no problems.

I now upgraded the system to this:

AMD Athlon 3500+ 64-Bit Venice
<Same memory as before>
Connect3D X850XT 256MB AGP8x
Abit AV8-3rd-Eye

I can use IDE hard drives with no problems on the new system but the SATA wont let me boot the windows home to install it on, it gets to the bit after u press enter to boot from disk and then the system hangs and does nothing.

[ + quote]

punejabe

Newbie

7. April 2006 @ 17:44

Link to this message

Can anyone help? This is an urgent problem, thnx

[ + quote]

punejabe

Newbie

8. April 2006 @ 03:46

Link to this message

BigDK,

Ive found out that the new motherboard doesnt support SATA2 but the old one had no problems o.O

Anyways, i changed the jumper settings, and now the board picks it up as 0mb's, before it was how a 300gb should be.

[ + quote]

BigDK

Senior Member

3 product reviews

8. April 2006 @ 05:19

Link to this message