|
|
|
keep getting error
|
|
|
gunner000
Suspended due to non-functional email address
|
7. April 2006 @ 09:02 |
Link to this message
|
|
i can,t get any media to work, just keep getting unable to read
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0A - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0A - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD200EB-11CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391472kB)
Free physical memory: 224MB (229512kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.4.2006
===== Disc-Copy over image - 1st step : Copy to image ...
9:49:01 PM #1 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:49:01 PM #2 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:49:02 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory
9:49:02 PM #4 Text 0 File Reader.cpp, Line 124
Reader running
9:49:02 PM #5 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
9:49:02 PM #6 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1608336 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
9:49:02 PM #7 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 1608336 = 1608336, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
9:49:02 PM #8 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
9:49:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1608335 (357:24.35, 3141MB)
9:49:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
9:49:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:49:02 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1608336 (1608336) = #1608336/357:24.36
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1608336 blocks [Image Recorder]
--------------------------------------------------------------
9:49:02 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3293872128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1608336 | lead-out | 1 | 0x41 | 0x00
9:49:02 PM #14 Phase 120 File dlgbrnst.cpp, Line 1685
Creating the image for burning
9:49:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:59:01 PM #16 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 1608336 (188A90h), lenght 0 blocks
9:59:01 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:59:02 PM #18 Phase 121 File dlgbrnst.cpp, Line 1685
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
9:59:26 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 56320KB of Memory
9:59:26 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
9:59:26 PM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running
9:59:27 PM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3293872128
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=357:24.36 ( 1608336) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Dave\My Documents\TempImage.nrg>
9:59:27 PM #5 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
10:00:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1608335 (357:24.35, 3141MB)
10:00:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:00:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193
10:00:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
10:00:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1608336 (1608336) = #1608336/357:24.36
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1608336 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
10:00:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3293872128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1608336 | lead-out | 1 | 0x41 | 0x00
10:00:11 PM #12 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:00:11 PM #13 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:00:12 PM #14 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
10:00:12 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:00:12 PM #16 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
10:00:12 PM #17 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
10:00:12 PM #18 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:01:36 PM #19 Text 0 File Cdrdrv.cpp, Line 1200
22:01:36.328 - D: LITE-ON DVDRW SOHW-1693S : Queue again later
10:04:27 PM #20 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 60 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x032a0000: Len x10000
0x00 00 01 BA 44 00 14 42 DC 55 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 B9 99 4A 95 10 29 95 A3 E1
0x41 31 B4 1E 59 09 A0 42 D6 83 CA 69 E8 CA B3 A5
10:04:27 PM #21 CDR -1135 File Writer.cpp, Line 311
Write error
D: LITE-ON DVDRW SOHW-1693S
10:04:27 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:04:27 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:04:27 PM #24 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 607
10:04:27 PM #25 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 8:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 8:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 8:08:08 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Senior Member
|
7. April 2006 @ 09:16 |
Link to this message
|
nasayin
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 09:17
|
Moderator
|
8. April 2006 @ 02:40 |
Link to this message
|
thread teleported to Nero forum
and as i've said in your other threads, keep replies about this problem in THIS thread, no more spawning numerous other threads, at the very least it's gonna stop ppl wanting to help you.
Quote:
Nero Version: 6.6.1.4
- follow nasayin's advise there, and read this 'sticky' (at the top of this forum page) if you like - http://forums.afterdawn.com/thread_view.cfm/317495
Basically Nero's 6.6.1.4 update is crap and buggy, the latest proven update is the previous update, 6.6.0.18
Quote:
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0A
- firmware is at KS0B now so you're one version behind - http://forum.rpc1.org/dl_firmware.php?download_id=2056 however your existing discs are being recognised by the current version of firmware you have, so it's something to keep in mind for another time, ie if you buy different discs that aren't catered for in the existing firmware.
edit- judging by the rest of the logfile, maybe you do need to update the firmware after all, however you should still get some decent discs instead of those awful Prodiscs
Quote:
Physical memory : 382MB (391472kB)
Free physical memory: 224MB (229512kB)
Memory in use : 41 %
- 384MB isn't a huge amount of memory to start with, you're gonna have to keep an eye on memory usage prior to ALL burning to make sure you have sufficient memory. make sure to close down as many programs as you can prior to burning; also no multitasking during burning (in case you do)
Quote:
Bus Type : default (0) -> ATAPI, detected: ?
- as your burner is internal to the PC, that question mark is saying your ATAPI drivers aren't loaded correctly, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm
Quote:
===== Disc-Copy over image - 1st step : Copy to image ...
DVD Track-Information from source disc:
Media Type: DVD-R
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1608335 (357:24.35, 3141MB)
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1608335 (357:24.35, 3141MB)
- i can see you're copying from a dual layer disc (that only has 3GB of data on it - a waste of a dual layer disc) to a single layer disc
Quote:
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193
- not much good quality, those Prodiscs, you should use decent discs in future. also this paragraph is the clue to whether or not your burners' firmware can recognise the discs. (For future reference if newer discs you buy are not catered for in the firmware, you'd just get the first line, not all 3 lines here).
Quote:
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
- that's strange, as per previous comment, the discs are definitely recognised by the firmware. Try some decent quality discs after all...
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
- see previous comment
Quote:
Write error
- see previous comment
Quote:
Burn process failed at 16x (22,160 KB/s)
- good grief!, 16x and for doing 'on the fly' copying, all with only 384MB memory to start with. try 4x
Quote:
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 8:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 8:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 8:08:08 PM (InCD4 driver for win NT/2K/XP)
- InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD.
Also, the ATAPI drivers are supposed to be listed in this section, sort them out as i've listed above and they'll appear in this section, fix as i've mentioned further up my reply, ie via http://home.comcast.net/~bbmayo/FAQ.htm
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 8. April 2006 @ 02:43
|
AfterDawn Addict
|
8. April 2006 @ 02:44 |
Link to this message
|
|
@creaky, wow, I think you just about covered it, Cheers.
|
Moderator
|
8. April 2006 @ 02:47 |
Link to this message
|
Hi, lol, took me ages to sift thru that log, i'm a little out of practice, and to think i did this on most logfiles in the Nero forum for a year solid, no wonder i can't go near logfiles much these days :P
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
Saltgrass
Senior Member
|
8. April 2006 @ 16:57 |
Link to this message
|
|
Do you have your burner set as Master?
Nero 7 v7.10.1.0
P4 2.4GHz 1 Gig RAM
NEC ND3550A DVD Burner
|
|
Advertisement
|
|
|
Moderator
|
9. April 2006 @ 03:43 |
Link to this message
|
@Saltgrass -
the problem looks to be solved, we're just waiting for original poster to come back..
however in answer to your question, his/her devices are set as follows -
Quote:
WDC WD200EB-11CPF0 atapi Port 0 ID 0
- the hard drive is on Primary IDE channel, set to Primary Master
Quote:
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1
- the burner is on Secondary IDE channel, set to Primary Slave
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 9. April 2006 @ 03:43
|
|
