|
|
|
Nero 7 - burn errors everytime - did work, now it doesn't
|
|
|
sonny_33
Newbie
|
22. April 2006 @ 14:57 |
Link to this message
|
|
I am not sure what I did, but I have Nero 7 (the bug-free version download) with Windows XP Media. It burns coaster every time now when it gets about 25% done... any help appreciated... here's the last log:
--------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: D108 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TSSTcorp DVD-ROM TS-H352C>Version: DE02 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352C atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: On
DiskPeripheral : Maxtor 7L250S0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352C D: CDRom0
HL-DT-ST DVD+-RW GWA4164B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095180kB)
Free physical memory: 1363MB (1396556kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.4.2006
Audio CD
5:00:09 PM #1 CDADOC -1 File Cdadoc.cpp, Line 1528
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 03:47.00, Pause frames: 150, Filters: 0, Name: '01.flac'.
Track 02: Length: 05:36.57, Pause frames: 000, Filters: 0, Name: '02.flac'.
Track 03: Length: 02:28.18, Pause frames: 000, Filters: 0, Name: '03.flac'.
Track 04: Length: 04:31.40, Pause frames: 000, Filters: 0, Name: '04.flac'.
Track 05: Length: 03:54.10, Pause frames: 000, Filters: 0, Name: '05.flac'.
Track 06: Length: 06:13.62, Pause frames: 000, Filters: 0, Name: '06.flac'.
Track 07: Length: 04:14.38, Pause frames: 000, Filters: 0, Name: '07.flac'.
Track 08: Length: 04:29.52, Pause frames: 000, Filters: 0, Name: '08.flac'.
Track 09: Length: 04:58.68, Pause frames: 000, Filters: 0, Name: '09.flac'.
Track 10: Length: 07:52.15, Pause frames: 000, Filters: 0, Name: '10.flac'.
Track 11: Length: 02:11.15, Pause frames: 000, Filters: 0, Name: '11.flac'.
Track 12: Length: 04:40.37, Pause frames: 000, Filters: 0, Name: '12.flac'.
Track 13: Length: 05:32.38, Pause frames: 000, Filters: 0, Name: '13.flac'.
Total size: 60:33.00
5:00:09 PM #2 Text 0 File Burncd.cpp, Line 3056
HL-DT-ST DVD+-RW GWA4164B
Buffer underrun protection activated
5:00:09 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
5:00:09 PM #4 Text 0 File Reader.cpp, Line 124
Reader running
5:00:09 PM #5 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVD+-RW GWA4164B running
5:00:09 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
5:00:09 PM #7 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using CD-R/RW media
5:00:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 272324 ( 60:32.74)
5:00:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
5:00:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVD+-RW GWA4164B
5:00:09 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:00:09 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (01.flac)
2 indices, index0 (150) not provided
original disc pos #0 + 17025 (17025) = #17025/3:47.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17025 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
1: TRM_AUDIO_NOPRE (02.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 25257 (25257) = #25257/5:36.57
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 25257 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
2: TRM_AUDIO_NOPRE (03.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 11118 (11118) = #11118/2:28.18
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11118 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
3: TRM_AUDIO_NOPRE (04.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 20365 (20365) = #20365/4:31.40
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 20365 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
4: TRM_AUDIO_NOPRE (05.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 17560 (17560) = #17560/3:54.10
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17560 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
5: TRM_AUDIO_NOPRE (06.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 28037 (28037) = #28037/6:13.62
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 28037 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
6: TRM_AUDIO_NOPRE (07.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 19088 (19088) = #19088/4:14.38
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19088 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
7: TRM_AUDIO_NOPRE (08.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 20227 (20227) = #20227/4:29.52
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 20227 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
8: TRM_AUDIO_NOPRE (09.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 22418 (22418) = #22418/4:58.68
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 22418 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
9: TRM_AUDIO_NOPRE (10.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 35415 (35415) = #35415/7:52.15
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 35415 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
10: TRM_AUDIO_NOPRE (11.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 9840 (9840) = #9840/2:11.15
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9840 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
11: TRM_AUDIO_NOPRE (12.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 21037 (21037) = #21037/4:40.37
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 21037 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
12: TRM_AUDIO_NOPRE (13.flac)
2 indices, index0 (0) not provided
original disc pos #0 + 24938 (24938) = #24938/5:32.38
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 24938 blocks [E: HL-DT-ST DVD+-RW GWA4164B]
--------------------------------------------------------------
5:00:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVD+-RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 13:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 40395600, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 40395600 40395600 99800064, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 99800064 99800064 125949600, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 125949600 125949600 173848080, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 173848080 173848080 215149200, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 215149200 215149200 281092224, ISRC ""
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 281092224 281092224 325987200, ISRC ""
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 325987200 325987200 373561104, ISRC ""
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 373561104 373561104 426288240, ISRC ""
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 426288240 426288240 509584320, ISRC ""
11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 509584320 509584320 532728000, ISRC ""
12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 532728000 532728000 582207024, ISRC ""
13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 582207024 582207024 640861200, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
17025 | 2 | 0 | 0x21 | 0x00
17025 | 2 | 1 | 0x21 | 0x00
42282 | 3 | 0 | 0x21 | 0x00
42282 | 3 | 1 | 0x21 | 0x00
53400 | 4 | 0 | 0x21 | 0x00
53400 | 4 | 1 | 0x21 | 0x00
73765 | 5 | 0 | 0x21 | 0x00
73765 | 5 | 1 | 0x21 | 0x00
91325 | 6 | 0 | 0x21 | 0x00
91325 | 6 | 1 | 0x21 | 0x00
119362 | 7 | 0 | 0x21 | 0x00
119362 | 7 | 1 | 0x21 | 0x00
138450 | 8 | 0 | 0x21 | 0x00
138450 | 8 | 1 | 0x21 | 0x00
158677 | 9 | 0 | 0x21 | 0x00
158677 | 9 | 1 | 0x21 | 0x00
181095 | 10 | 0 | 0x21 | 0x00
181095 | 10 | 1 | 0x21 | 0x00
216510 | 11 | 0 | 0x21 | 0x00
216510 | 11 | 1 | 0x21 | 0x00
226350 | 12 | 0 | 0x21 | 0x00
226350 | 12 | 1 | 0x21 | 0x00
247387 | 13 | 0 | 0x21 | 0x00
247387 | 13 | 1 | 0x21 | 0x00
272325 | lead-out | 1 | 0x01 | 0x00
5:00:10 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:00:10 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:00:10 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 16x (2,400 KB/s)
5:00:10 PM #17 SPTI -1189 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 30 02
Buffer x05062200: Len x4000
5:00:10 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:00:10 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #17025
5:00:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #42282
5:00:10 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #53400
5:00:10 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #73765
5:00:10 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #91325
5:00:10 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #119362
5:00:10 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #138450
5:00:10 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #158677
5:00:10 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #181095
5:00:10 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #216510
5:00:10 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #226350
5:00:10 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #247387
5:00:10 PM #31 Text 0 File MMC.cpp, Line 17214
StartDAO : CD-Text - On
5:00:10 PM #32 Text 0 File MMC.cpp, Line 21893
Set BUFE: Buffer underrun protection -> ON
5:00:10 PM #33 Text 0 File MMC.cpp, Line 17447
CueData, Len=128
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 01 00 00 03 31 00
21 03 01 00 00 09 19 39
21 04 01 00 00 0b 36 00
21 05 01 00 00 10 19 28
21 06 01 00 00 14 13 32
21 07 01 00 00 1a 21 25
21 08 01 00 00 1e 30 00
21 09 01 00 00 23 11 34
21 0a 01 00 00 28 10 2d
21 0b 01 00 00 30 08 3c
21 0c 01 00 00 32 14 00
21 0d 01 00 00 37 00 25
01 aa 01 01 00 3c 21 00
5:01:05 PM #34 SPTI -1119 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 A4 10 00 00 1B 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
Buffer x0ae90000: Len xf810
0xDB FD 5F FD F8 FD 84 FD 02 FE 83 FD F9 FD 5E FD
0x22 FE 56 FD 71 FE 70 FD EC FE A5 FD 83 FF E8 FD
0x20 00 51 FE CF 00 C9 FE 6B 01 36 FF 00 02 87 FF
5:01:05 PM #35 CDR -1119 File Writer.cpp, Line 302
Track following error
E: HL-DT-ST DVD+-RW GWA4164B
5:01:05 PM #36 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:01:05 PM #37 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:01:05 PM #38 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 16x (2,400 KB/s)
5:01:05 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:01:05 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
|
sonny_33
Newbie
|
22. April 2006 @ 18:55 |
Link to this message
|
12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 532728000 532728000 582207024, ISRC ""
13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 582207024 582207024 640861200, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x01 | 0x00
-150 | 1 | 0 | 0x21 | 0x00
0 | 1 | 1 | 0x21 | 0x00
17025 | 2 | 0 | 0x21 | 0x00
17025 | 2 | 1 | 0x21 | 0x00
42282 | 3 | 0 | 0x21 | 0x00
42282 | 3 | 1 | 0x21 | 0x00
53400 | 4 | 0 | 0x21 | 0x00
53400 | 4 | 1 | 0x21 | 0x00
73765 | 5 | 0 | 0x21 | 0x00
73765 | 5 | 1 | 0x21 | 0x00
91325 | 6 | 0 | 0x21 | 0x00
91325 | 6 | 1 | 0x21 | 0x00
119362 | 7 | 0 | 0x21 | 0x00
119362 | 7 | 1 | 0x21 | 0x00
138450 | 8 | 0 | 0x21 | 0x00
138450 | 8 | 1 | 0x21 | 0x00
158677 | 9 | 0 | 0x21 | 0x00
158677 | 9 | 1 | 0x21 | 0x00
181095 | 10 | 0 | 0x21 | 0x00
181095 | 10 | 1 | 0x21 | 0x00
216510 | 11 | 0 | 0x21 | 0x00
216510 | 11 | 1 | 0x21 | 0x00
226350 | 12 | 0 | 0x21 | 0x00
226350 | 12 | 1 | 0x21 | 0x00
247387 | 13 | 0 | 0x21 | 0x00
247387 | 13 | 1 | 0x21 | 0x00
272325 | lead-out | 1 | 0x01 | 0x00
5:00:10 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:00:10 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:00:10 PM #16 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 16x (2,400 KB/s)
5:00:10 PM #17 SPTI -1189 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 30 02
Buffer x05062200: Len x4000
5:00:10 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:00:10 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #17025
5:00:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #42282
5:00:10 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #53400
5:00:10 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #73765
5:00:10 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #91325
5:00:10 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #119362
5:00:10 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #138450
5:00:10 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #158677
5:00:10 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #181095
5:00:10 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #216510
5:00:10 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #226350
5:00:10 PM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #247387
5:00:10 PM #31 Text 0 File MMC.cpp, Line 17214
StartDAO : CD-Text - On
5:00:10 PM #32 Text 0 File MMC.cpp, Line 21893
Set BUFE: Buffer underrun protection -> ON
5:00:10 PM #33 Text 0 File MMC.cpp, Line 17447
CueData, Len=128
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 01 00 00 03 31 00
21 03 01 00 00 09 19 39
21 04 01 00 00 0b 36 00
21 05 01 00 00 10 19 28
21 06 01 00 00 14 13 32
21 07 01 00 00 1a 21 25
21 08 01 00 00 1e 30 00
21 09 01 00 00 23 11 34
21 0a 01 00 00 28 10 2d
21 0b 01 00 00 30 08 3c
21 0c 01 00 00 32 14 00
21 0d 01 00 00 37 00 25
01 aa 01 01 00 3c 21 00
5:01:05 PM #34 SPTI -1119 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 A4 10 00 00 1B 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
Buffer x0ae90000: Len xf810
0xDB FD 5F FD F8 FD 84 FD 02 FE 83 FD F9 FD 5E FD
0x22 FE 56 FD 71 FE 70 FD EC FE A5 FD 83 FF E8 FD
0x20 00 51 FE CF 00 C9 FE 6B 01 36 FF 00 02 87 FF
5:01:05 PM #35 CDR -1119 File Writer.cpp, Line 302
Track following error
E: HL-DT-ST DVD+-RW GWA4164B
5:01:05 PM #36 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:01:05 PM #37 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:01:05 PM #38 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 16x (2,400 KB/s)
5:01:05 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
5:01:05 PM #40 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
22. April 2006 @ 19:57 |
Link to this message
|
|
@sonny_33
Here are possible causes for the error in you log - Track following error - from Nero:
Why do I get a 'Track following error' message?
The "Track following error" message is a hardware error. It can be caused by the following:
* Poor media - Try more than one brand of CD-R media to rule this out as cause.
* Poor power - The electric power supply of your recorder could be fluctuating. If you have an internal recorder, try a different power connector and make sure it's not being shared by any other devices. If you have an external recorder, remove it from the external chassis, if you can, and connect it on your system as an internal recorder. If this resolves your issue, you need to replace or service the power source in your external chassis.
* Optical head is dirty or needs alignment - Please contact your recorder manufacturer to service your unit.
Let's start with which brand of CD's you're using. Hopefully that's the cause. Which ones are you using?
The other thing is your drive isn't recognizing them. Usually the manufacturer and id are in the log.
A firmware update can sometimes help but from what I can find not a whole lot of support on this drive. Looks like Dell and HP use them.
|
|
sonny_33
Newbie
|
23. April 2006 @ 10:04 |
Link to this message
|
|
Thanx for your replay...
I use FujiFilm discs. I have never had a problem with them before... like i said, everything used to work fine and just a couple of days ago, this started happening....
I tried swaping the power supply a couple of times....no avail....
any other help?
|
Moderator
|
23. April 2006 @ 10:25 |
Link to this message
|
|
I'd still try switching the brand of discs. Your drive's not recognizing them. For the fuji look for made in Japan. Or try some made in Japan Maxell.
You can also try cleaning the lens with a lens cleaner. I'd also check how much dust is in the tower & fans.
A firmware update if there is one may do the trick too but since I can't find one you may have to contact the pc's manufacturer to see if one is available.
|
|
sonny_33
Newbie
|
23. April 2006 @ 12:24 |
Link to this message
|
|
after some research, i think it may have to do with my drive (GWA4164B)
I don't know......i did try a couple different dics too and that didn't work......
|
Moderator
|
23. April 2006 @ 12:49 |
Link to this message
|
|
Well it's not sounding to promising. The dell support forum had a lot of complaints about it. I'd still try running a lens cleaner and clean up any dust.
If all fails hopefully this is still under warranty. Don't know if you have a dell or not but if you do here's a # that might work for their tech support: 1-800-232-8544.
Let us know how it turns out.
|
|
sonny_33
Newbie
|
24. April 2006 @ 10:09 |
Link to this message
|
|
well, in do have a Dell E510. and I have only had it for 5 weeks. i am pissed off! i am going to call that number tonight and give them a piece of my mind......
|
Moderator
|
24. April 2006 @ 11:47 |
Link to this message
|
Only five weeks old? Yeah I'd be pissed. You've used different type of discs - but they may say that the brand of discs your using is the cause. Check w/ them on a firmware update and where to get them in the future. Finding web support on this drive ain't easy.
The one of the errors you got (KEY_HARDWARE_ERROR) makes me think it more of a hardware problem also since you have tried the other suggestions.
One other thing to try - have you tried to burn cd's with any other software besides Nero?
|
|
sonny_33
Newbie
|
24. April 2006 @ 11:58 |
Link to this message
|
If I haven't already, I wanted to thank you for all of your replies.... i appreciate it very much!
Yes, I have also used Roxio (or Sonic) or whatever was on the computer when I got it. I currently have Nero 7 Premium. I thought that might be the problem so I downgraded to Nero 6 and that gave me the same results......
yeah, i find it obsurd that there are no firmware updates or anything for this drive........JUNK!
|
Moderator
|
24. April 2006 @ 12:43 |
Link to this message
|
Hey not a problem!
Roxio and Nero can conflict but I don't see any of the drivers in your log that will usually cause this.
You could try uninstalling Sonic/Roxio and running the clean tool to remove all traces. Just as an FYI on my latop I have both Sonic and Nero (none of the drivers that conflict either according to my Nero log) and I dont have a problem burning cd's w/ Nero or the occasionally dvd on it either.
Keep us posted though - I'm very curious of the outcome! (hopefully good)
|
|
sonny_33
Newbie
|
24. April 2006 @ 14:10 |
Link to this message
|
|
well, now i can burn DVDs but I am still coastering cd-rs left and right......should I still call Dell?
|
Moderator
|
24. April 2006 @ 17:51 |
Link to this message
|
I'm thinking I would at least for a firmware update or where to find support for it. That may take care of the problem. Your drive doesn't even recoginze them. The manufacturer info is usually in the log.
Were you not able to burns DVD's b/4? Oh and what other brand of cd's did you try?
I forgot to give you the link to the zapper to remove all traces of Roxio/Sonic.
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
|
|
sonny_33
Newbie
|
24. April 2006 @ 18:14 |
Link to this message
|
uffffffff.....okay, just got off the phone with Dell (with that number that is listed above). After opening the chassis and unplugging and plugging the wires in the back of the drive, the lady said that "my drive wasn't showing up in the BIOS"?!??! sorry, not too good at this stuff....anyways, she said that they will replace the drive....i requested that they NOT send me the same drive as i have been seeing a lot of people have the same problems with this drive...
that's the thing. THERE IS NO FIRMWARE UPDATES FOR THIS DRIVE! nothing! No support either...
i still have Roxio/Sonic installed. Should I get rid of those?
i was using FujiFilm discs. I also tried Memorex, Imation. Yes, i was always able to burn DVDs, just not CDs. I tried Nero 7, Nero 6, and even that Roxio Sonic CD burning program that my Dell had installed.
|
Moderator
|
24. April 2006 @ 18:37 |
Link to this message
|
LOL - take the new drive and run!! I would try and see what they will replace with it and check it out and you can post back the make and model if you like. Hopefully it will be a drive that will have support. that's a little more accessible. Firmware helps the drive w/ read/write strategies of media esp. the newer stuff.
While you wait for the new drive can't hurt uninstalling Roxio and running the clean tool and see if it helps.
The brands your using well have given me problems. Though not Coaster after Coaster. I use Made in Japan Fuji or Maxells for cd's. For DVD's I use Taiyo Yuden or Verbatim.
|
|
rick5446
Suspended due to non-functional email address
|
24. April 2006 @ 21:13 |
Link to this message
|
HELLO binkie7..HERE's one hopefully U can help me with..I've had 175 successful burns.Now 10 coasters in a row
The only thing that I can use is Copy to DVD..For good burns
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <TEAC DV-W516GB> Version: J4S2 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS XJ-HD166S >Version: DTS5 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200AB-00DBA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : HDS722525VLAT80 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC DV-W516GB atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
TEAC DV-W516GB E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 103MB (106128kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.4.2006
UDF/ISO compilation
11:46:34 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
11:46:34 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
11:46:34 PM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:46:34 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
11:46:35 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
11:46:35 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
11:46:35 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: TEAC DV-W516GB running
11:46:35 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:46:35 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:46:35 PM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
11:46:35 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2284527 (507:40.27, 4461MB)
11:46:35 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
11:46:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TEAC DV-W516GB, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:46:35 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:46:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2284528 (2284528) = #2284528/507:40.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2284528 blocks [E: TEAC DV-W516GB]
--------------------------------------------------------------
11:46:35 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: TEAC DV-W516GB] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4678713344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2284528 | lead-out | 1 | 0x41 | 0x00
11:46:35 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:46:35 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:46:35 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
11:46:35 PM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
11:46:35 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
11:46:35 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 6x (8,310 KB/s)
11:46:35 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:46:35 PM #24 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
11:46:35 PM #25 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
11:46:35 PM #26 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:47:28 PM #27 Text 0 File Cdrdrv.cpp, Line 1211
23:47:28.093 - E: TEAC DV-W516GB : Queue again later
11:50:16 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 290
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 27 40 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x0ab50000: Len x10000
0x00 00 01 BA 44 03 3D A8 4D 8F 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 05 21 00 CF 98 8D 80 01 06 24
0x7A 1B A7 F0 EA BB A6 F9 FA 67 4A 9D 3E 54 F9 4D
11:50:16 PM #29 CDR -1046 File Writer.cpp, Line 302
Illegal disc
E: TEAC DV-W516GB
11:50:16 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:50:17 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:50:17 PM #32 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 10047
11:50:17 PM #33 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
NOW this is with IMG BURN or DVD Decrypter
I 00:20:08 ImgBurn Version 1.3.0.0 started!
I 00:20:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
W 00:20:09 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 00:20:09 Initialising SPTI...
I 00:20:09 Searching for SCSI / ATAPI devices...
I 00:20:09 Found 1 DVD-ROM and 1 DVD±RW!
I 00:29:07 Operation Started!
I 00:29:07 Source File: F:\1-AAA_TheatreMovies\11_14\11_14.ISO
I 00:29:07 Source File Sectors: 2,154,147 (MODE1/2048)
I 00:29:07 Source File Size: 4,411,693,056 bytes
I 00:29:07 Source File Volume Identifier: 11_14
I 00:29:07 Source File Implementation Identifier: DVD Shrink
I 00:29:07 Source File UDF Revision: 1.02
I 00:29:07 Destination Device: [1:1:0] TEAC DV-W516GB J4S2 (E:) (ATA)
I 00:29:07 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x)
I 00:29:07 Destination Media Sectors: 2,297,888
I 00:29:07 Write Mode: DVD
I 00:29:07 Write Type: DAO
I 00:29:07 Write Speed: 6x
I 00:29:07 Link Size: Auto
I 00:29:07 Test Mode: No
I 00:29:07 BURN-Proof: Enabled
I 00:29:07 Filling Buffer...
I 00:29:08 Writing LeadIn...
I 00:30:11 Writing Image...
W 00:32:36 Failed to Write Sectors 7104 - 7135 - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (1 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (2 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (3 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (4 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (5 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (6 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (7 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (8 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (9 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (10 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (11 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (12 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (13 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (14 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (15 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (16 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (17 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (18 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (19 of 20)...
W 00:32:36 Retry Failed - Cannot Write Medium - Incompatible Format
W 00:32:36 Retrying (20 of 20)...
W 00:32:37 Retry Failed - Cannot Write Medium - Incompatible Format
E 00:32:41 Failed to Write Sectors 7104 - 7135 - Cannot Write Medium - Incompatible Format
I 00:32:41 Synchronising Cache...
E 00:32:42 Failed to Write Image!
E 00:32:42 Operation Failed! - Duration: 00:03:34
I 00:32:42 Average Write Rate: 95 KB/s (0.1x) - Maximum Write Rate: 95 KB/s (0.1x)
ALL BURNS are Verbatim MCC 03RG20 at 6xspeed
never seen Incompatible Format or
|
Moderator
|
25. April 2006 @ 06:59 |
Link to this message
|
@rick5446
Well firmware is up to date, your using good media and burn speed.
Quote:
Physical memory : 511MB
Free physical memory: 103MB
Memory in use : 79 %
Try freeing up some memory. Shut down any unnessary processes.
Take the burn speed down to 4x and see if that helps.
Quote:
Sense Key: 0x02(KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x 05
This error corresponds w/ the error you get from ImgBurn - Incompatible Format - I guess Nero just says it a little differently.
Nero, Imgburn & Decrypter are using XP's aspi interface SPTI - I'm not sure which one Copy To DVD uses. Check Nero Toolkit - InfoTool - ASPI tab and is if it shows an aspi as being corrupted (if you have any installed).
Here's your error code (023005):
http://www.cdr-zone.com/articles/atapi_error_codes_page_1.html
Let us know how it goes.
This message has been edited since posting. Last time this message was edited on 25. April 2006 @ 07:00
|
|
roustie99
Newbie
|
25. April 2006 @ 10:07 |
Link to this message
|
i just ran the Nero info..and it says i don't have a system aspi? but it says the Nero 1 version 2.0.1.74 is working properly, should i have another one for my system?..if so, how do i get 1?
|
|
rick5446
Suspended due to non-functional email address
|
25. April 2006 @ 12:01 |
Link to this message
|
|
Thanks alot..binkie7..I've reinstaled ASPI,hopefully this will correct the problem..Just can't figure how from 1 burn to the next,how this all of a sudden disappears off the computer [ghost in the machine] I Guess!!
|
Moderator
|
25. April 2006 @ 12:14 |
Link to this message
|
|
@roustie99
Not usually neccesary unless a program requires one. Nero comes with one but if your running XP it uses XP's spti interface.
I have no other ones installed either on any of my pc's - no need. But if one was installed you can see if it's corrupted usually in Nero InfoTool.
Editted to add:
@rick5446
Try a burn and let us know how it goes!
This message has been edited since posting. Last time this message was edited on 25. April 2006 @ 12:17
|
|
roustie99
Newbie
|
25. April 2006 @ 12:25 |
Link to this message
|
ty:)...does this log have anything that jumps out at you? i have 2 lite on dvd burners..1 day..they both stopped working..i can burn music cds, and xvids as data on cdr's..but no dvd's using Nero or dvd dedryptor
|
|
roustie99
Newbie
|
25. April 2006 @ 12:29 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0C - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-812S >Version: US0Q - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00EVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-812S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-812S H: CDRom0
LITE-ON DVDRW SOHW-1673S I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572204kB)
Free physical memory: 670MB (686304kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.4.2006
ISO compilation
12:49:43 PM #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:49:43 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
12:49:43 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
12:49:43 PM #4 Text 0 File Writer.cpp, Line 113
Writer I: LITE-ON DVDRW SOHW-1673S running
12:49:43 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:49:43 PM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
12:50:40 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1704479 (378:46.29, 3329MB)
12:50:40 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
12:50:40 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
12:50:40 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
12:50:40 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1704480 (1704480) = #1704480/378:46.30
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1704480 blocks [I: LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------
12:50:40 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [I: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3490775040, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1704480 | lead-out | 1 | 0x41 | 0x00
12:50:40 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:50:40 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:50:40 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
12:50:40 PM #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
12:50:40 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
12:50:40 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
12:50:40 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:50:41 PM #20 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
12:50:41 PM #21 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
12:50:41 PM #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:51:44 PM #23 Text 0 File Cdrdrv.cpp, Line 1211
12:51:44.484 - I: LITE-ON DVDRW SOHW-1673S : Queue again later
12:54:14 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 290
I: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 46 C0 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x063a0000: Len x10000
0x00 00 01 BA 44 08 3F D4 9C 55 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 03 56 65 50 30 F8 C4 E2 7C
0x3C 9F 0D 3D C0 67 76 A5 FA 39 D1 6E A1 6F 46 80
12:54:14 PM #25 CDR -1046 File Writer.cpp, Line 302
Illegal disc
I: LITE-ON DVDRW SOHW-1673S
12:54:14 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:54:14 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:54:14 PM #28 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 18111
12:54:14 PM #29 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 12:19:28 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
25. April 2006 @ 12:39 |
Link to this message
|
@roustie99
To keep things less confusing for everyone - best thing is to post the log in one thread only. Right now it's in 3 threads and 1 has your email addy in it (need to edit that out). I know you said not media in 1 thread but the 1st thing that jumps out at me is the media:
Quote:
Disc Manufacturer: CMC MA - G.
Not the best by far - better to try Verbatim, made in japan Fuji, Sony or Maxell.
Let's stick with one thread (you pick) and edit the posts in the others.
This message has been edited since posting. Last time this message was edited on 25. April 2006 @ 12:40
|
|
roustie99
Newbie
|
25. April 2006 @ 12:55 |
Link to this message
|
i hear ya..well..the reason i said "not media" is i have made coasters with about 10 verbatim's and probably 5 maxells..i was at the end of a maxell spindle when i started having troubles..if it was only 1 of my burners..i would assume it was a hardware issue..but both on the same day..its gotta be something else..i mean..i have had both burners for over a year..and i cannot even remember making even 1 Coaster before..as far as editing..i am in the process of deleting the other posts right now
|
|
Advertisement
|
|
|
Moderator
|
25. April 2006 @ 16:49 |
Link to this message
|
|
|
