|
I have a cd writer and a dvd writer but a third one SCSIVAX DVD/CD-ROM shows up on my log.i read that this is a virtual drive that could be mistaken for the actual drive. i uninstalled it but burn failed again.i have checked my DMA settings and they are on for both primary and secondary channels.firmware also updated. please help
log
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <_NEC DVD_RW ND-4550A> Version: 1.08 - HA 1 TA 5 - 7.0.8.2
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.01 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD400BB-00FJA0 atapi Port 0 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8526B D: CDRom0
_NEC DVD_RW ND-4550A G: CDRom5
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
BUFE : 0
Physical memory : 223MB (228848kB)
Free physical memory: 60MB (61808kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.5.2006
UDF/ISO compilation
09:07:06 AM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
09:07:06 AM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
09:07:06 AM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
09:07:06 AM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
09:07:06 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 35840KB of Memory
09:07:06 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
09:07:06 AM #7 Text 0 File Writer.cpp, Line 113
Writer G: _NEC DVD_RW ND-4550A running
09:07:06 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
09:07:06 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
09:07:07 AM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
09:07:07 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1772863 (393:58.13, 3462MB)
09:07:07 AM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
09:07:07 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
09:07:07 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:07:07 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1772864 (1772864) = #1772864/393:58.14
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1772864 blocks [G: _NEC DVD_RW ND-4550A]
--------------------------------------------------------------
09:07:07 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: _NEC DVD_RW ND-4550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3630825472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1772864 | lead-out | 1 | 0x41 | 0x00
09:07:07 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
09:07:07 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
09:07:07 AM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
09:07:07 AM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
09:07:07 AM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
09:07:07 AM #22 Phase 32 File dlgbrnst.cpp, Line 1730
Simulation started at 8x (11,080 KB/s)
09:07:07 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:07:07 AM #24 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
09:07:07 AM #25 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
09:07:07 AM #26 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
09:07:13 AM #27 Text 0 File Cdrdrv.cpp, Line 1211
09:07:13.687 - G: _NEC DVD_RW ND-4550A : Queue again later
09:14:58 AM #28 Text 0 File WriterStatus.cpp, Line 116
<G: _NEC DVD_RW ND-4550A> start writing Lead-Out at LBA 1772864 (1B0D40h), length 0 blocks
09:14:58 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:14:58 AM #30 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1772863
09:15:17 AM #31 Phase 33 File dlgbrnst.cpp, Line 1730
Simulation completed successfully at 8x (11,080 KB/s)
09:15:18 AM #32 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
09:15:19 AM #33 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:15:19 AM #34 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
09:15:19 AM #35 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
09:15:19 AM #36 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 1E0D3F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
09:15:24 AM #37 Text 0 File Cdrdrv.cpp, Line 1211
09:15:24.687 - G: _NEC DVD_RW ND-4550A : Queue again later
09:15:26 AM #38 SPTI -600 File SCSIPassThrough.cpp, Line 290
G: CdRom5: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04da0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
09:15:26 AM #39 CDR -600 File Writer.cpp, Line 302
Device not available
G: _NEC DVD_RW ND-4550A
09:15:26 AM #40 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:15:26 AM #41 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
09:15:26 AM #42 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was -1
09:16:03 AM #43 SPTI -1169 File SCSIPassThrough.cpp, Line 290
G: CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0344d400: Len x3c
0x00 00 00 00 00 00 00 00 05 32 02 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
09:16:03 AM #44 SPTI -1169 File SCSIPassThrough.cpp, Line 290
G: CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0344d400: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
09:16:03 AM #45 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)
09:16:04 AM #46 SPTI -1169 File SCSIPassThrough.cpp, Line 290
G: CdRom5: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x0344d000: Len x3c
0x00 00 00 00 00 00 00 00 05 32 42 05 08 10 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 30/06/2005 08:47:33 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
