|
|
|
newby problems
|
|
|
nvdranger
Newbie
|
14. June 2006 @ 20:13 |
Link to this message
|
i'm new to nero and burning dvds, i'm been searching the forums and trying a couple things and i cant make heads or tails of this. here is what I recieved the 1st time i tried to burn the dvd (disk to disk):
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-H20L>Version: S632 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE-DVD DROM6216 >Version: HD08 - HA 1 TA 1 - 7.2.0.3
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3300831AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 2 ID 0 DMA: On
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 2 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GSA-H20L E: CDRom0
IDE-DVD DROM6216 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1982MB (2030060kB)
Free physical memory: 1102MB (1129288kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
DVD-Copy on the fly
9:10:21 PM #1 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:10:21 PM #2 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:10:21 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
9:10:21 PM #4 Text 0 File Reader.cpp, Line 124
Reader running
9:10:21 PM #5 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRRW GSA-H20L running
9:10:23 PM #6 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-ROM
Last LBA on layer 0 = 2026975 / 0x1EEDDF / 3958MB
S01 T01 Con 0x04 Start 0 Len 4008432 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
9:10:25 PM #7 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 4008432 = 4008432, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
9:10:26 PM #8 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media
9:10:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4008431 (890:45.56, 7828MB)
9:10:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
9:10:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
9:10:26 PM #12 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:10:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 4008432 (4008432) = #4008432/890:45.57
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4008432 blocks [E: HL-DT-ST DVDRRW GSA-H20L]
--------------------------------------------------------------
9:10:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8209268736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4008432 | lead-out | 1 | 0x41 | 0x00
9:10:28 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:10:28 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:10:28 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
9:10:28 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:10:28 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 636
L0 Data Zone Capacity set to 2026976 (1EEDE0h, 3958MB) -> OK, confirmed setting
9:10:28 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 663
Burning Layer 1
9:10:28 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 673
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
9:10:28 PM #22 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: D01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 43 4D 43 20 4D - 41 47 00 44 30 31 00 40 ...CMC.MAG.D01.@
25 25 37 0B 02 3C 6A 02 - 3C 6A 1B 1C 0D 0C 0C 0C %%7..<j.<j......
02 01 01 10 00 1B 1C 0D - 0C 0C 0C 02 01 01 10 00 ................
9:10:28 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
9:12:46 PM #24 SPTI -1128 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 00 00 03 8F 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x3044b000: Len x10000
9:12:46 PM #25 TRANSFER -25 File Reader.cpp, Line 364
Error reading data
9:12:46 PM #26 Text 0 File Reader.cpp, Line 367
Exception value: -1128
9:14:03 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:15:12 PM #28 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
9:35:34 PM #29 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully
9:35:34 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 5:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I tried the following per one of the threads:
Quote:
Nero API version: 7.2.0.3
This latest version of Nero is full of bugs, I recommend you uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install 7.0.8.2 a more stable version from here
http://www.filehippo.com click on Nero 7.2.0.3 and then select 7.0.8.2 for a bug free version
Then I received this for the 2nd burn:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-H20L>Version: S632 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <IDE-DVD DROM6216 >Version: HD08 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3300831AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRRW GSA-H20L atapi Port 2 ID 0 DMA: On
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 2 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GSA-H20L E: CDRom0
IDE-DVD DROM6216 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1982MB (2030060kB)
Free physical memory: 1285MB (1316456kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
DVD-Copy on the fly
10:29:54 PM #1 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:29:54 PM #2 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:29:54 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
10:29:54 PM #4 Text 0 File Reader.cpp, Line 124
Reader running
10:29:54 PM #5 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRRW GSA-H20L running
10:29:56 PM #6 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-ROM
Last LBA on layer 0 = 2026975 / 0x1EEDDF / 3958MB
S01 T01 Con 0x04 Start 0 Len 4008432 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
10:29:58 PM #7 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 4008432 = 4008432, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:29:59 PM #8 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
10:29:59 PM #9 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4008431 (890:45.56, 7828MB)
10:29:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
10:29:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRRW GSA-H20L, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
10:29:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:30:01 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 4008432 (4008432) = #4008432/890:45.57
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4008432 blocks [E: HL-DT-ST DVDRRW GSA-H20L]
--------------------------------------------------------------
10:30:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRRW GSA-H20L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8209268736, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4008432 | lead-out | 1 | 0x41 | 0x00
10:30:01 PM #15 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:30:01 PM #16 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:30:01 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
10:30:01 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:30:02 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 636
L0 Data Zone Capacity set to 2026976 (1EEDE0h, 3958MB) -> OK, confirmed setting
10:30:02 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 663
Burning Layer 1
10:30:02 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 673
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
10:30:02 PM #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: D01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 43 4D 43 20 4D - 41 47 00 44 30 31 00 40 ...CMC.MAG.D01.@
25 25 37 0B 02 3C 6A 02 - 3C 6A 1B 1C 0D 0C 0C 0C %%7..<j.<j......
02 01 01 10 00 1B 1C 0D - 0C 0C 0C 02 01 01 10 00 ................
10:30:02 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
10:32:44 PM #24 SPTI -1128 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x11
Sense Qual: 0x05
CDB Data: 0x28 00 00 03 8F 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 05
Buffer x05581000: Len x10000
10:32:44 PM #25 TRANSFER -25 File Reader.cpp, Line 364
Error reading data
10:32:44 PM #26 Text 0 File Reader.cpp, Line 367
Exception value: -1128
10:33:09 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:34:16 PM #28 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
10:54:38 PM #29 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully
10:54:38 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 5:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any ideas? Thanks in advance!!!
Ken
|
AfterDawn Addict
|
14. June 2006 @ 23:32 |
Link to this message
|
Quote:
Disc Manufacturer ID: CMC MAG, Media Type ID: D01, Product revision number: 0
These are horrible discs, try Verbatim or Sony (made in japan)
Quote:
here is what I recieved the 1st time i tried to burn the dvd (disk to disk):
Can you explain what you are attemptng to do.
This message has been edited since posting. Last time this message was edited on 14. June 2006 @ 23:33
|
|
nvdranger
Newbie
|
15. June 2006 @ 07:25 |
Link to this message
|
|
well we know what assuming does, i assumed since hp made the dvd i would be good to go, wont make that mistake again.
i was trying to make an exact copy of the chronicals of narnia as a test subject to figure out wtf i'm doing. i had narnia in the dvd-rom drive and a blank disk in the writeable drive...does that make sense (does in my head but...;))?
|
|
Advertisement
|
|
|
Member
|
15. June 2006 @ 13:38 |
Link to this message
|
Quote:
Disc Manufacturer ID: CMC.MAG.
As gwendolin noted, try a better quality disc. Since you are burning Dual Layer media, go with the best - Verbatim.
Quote:
DVD-Copy on the fly
You are asking for trouble. You should burn to your hard drive first, and I'll tell you why below.
Quote:
10:32:44 PM #25 TRANSFER -25 File Reader.cpp, Line 364
Error reading data
The disc being copied had a read error. Normally such errors can be corrected automatically, but the reader needs to scan that sector again. This could be something as simple as a smudge on the disc or worse, a deep scratch. There's no way of telling. However, since you are copying on the fly, a simple and correctable read error may cause the buffer on the burner to hit 0. Once it hits zero, the burn will fail because it has not been supplied with the data to complete the write.
My suggestion is to copy to your hard drive first. If there are any read errors, then let the read process fail, not the burn process which will create coasters.
If you find your burn is failing at 50-51%, then the read error may be caused because of the layer break on a dual layer disc. Make sure your burners firmware is updated.
Good luck...
This message has been edited since posting. Last time this message was edited on 15. June 2006 @ 13:39
|
|
