|
|
|
Nero Freezing
|
|
|
kibblz
Junior Member
|
10. July 2006 @ 17:54 |
Link to this message
|
Recently i bought a new Sony dual layer dvd burner for burning stuff stuff. The purchase included a Nero 6 burning package complete with vision express and others. I wanted to change a DivX file into a dvd so i put it into Nero vision express and let it do its thing. 3 hours later it finishes up converting the files and then proceeds to sit idle for the next MANY hours. After finnaly coming to the conclusion that it wasnt going to do anything i decided to close the program. Which did not work, nor did end task so eventually i had to restart the computer. So i have done this on about 3 different occasions with 3 different DivX files all with the same end result. Then one day i noticed that my dvd player can play divx/mpeg4 files so i decided to try burning a DivX file straight to the disc using Nero burning rom (yes i burned it as a data dvd)and the GD thing froze on me again with no way to shut it down without shutting down. Oh and I dont know if this helps but i recently took this comp in to repair because i was getting some funky serious error messages, and even brought the burner there with it and told them to make it work while they were fixing the other prob. The f****rs said it was the hard drive that was causing the errors and the problems burning, which turns out they were right on one front. So if you could give me any information leading to the solution of this problem great karma will come your way. I might even open a paypal account and thank you elsewise.
This message has been edited since posting. Last time this message was edited on 13. July 2006 @ 19:16
|
|
Advertisement
|
|
|
|
Member
|
10. July 2006 @ 18:01 |
Link to this message
|
you might wanan post your Nero log. you can find it at:
program files>ahead>Nero>nerohistory.txt
just make sure to edit out ur serial number
also in the forums rules, which you should read if u havent,
http://forums.afterdawn.com/thread_view.cfm/2487
it says no foul language :) do try to keep your post clean.
This message has been edited since posting. Last time this message was edited on 10. July 2006 @ 18:05
|
|
kibblz
Junior Member
|
10. July 2006 @ 18:05 |
Link to this message
|
My Nerohistory thing.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19b
Recorder: <SONY DVD RW DRU-820A> Version: 2.0b - HA 2 TA 0 - 6.6.0.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-RW GCE-8160B >Version: 1.02 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L250R0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8160B D: CDRom0
SONY DVD RW DRU-820A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 277MB (283940kB)
Memory in use : 45
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.7.2006
CueSheet
10:45:37 PM #1 Text 0 File Burncd.cpp, Line 2948
SONY DVD RW DRU-820A
Power-Burn activated
10:45:37 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:45:37 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
10:45:38 PM #4 SCSI -1081 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x53
Sense Qual: 0x02
CDB Data: 0x1B 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x53 0x02
10:45:48 PM #5 Phase 40 File dlgbrnst.cpp, Line 1832
Aborted by user
10:45:48 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
Disc check failed: Medium not allowed (Wrong CD)
10:45:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)
10:45:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: SONY DVD RW DRU-820A
Medium not present
10:45:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD+R. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 5/24/2006 6:48:03 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19b
Recorder: <SONY DVD RW DRU-820A> Version: 2.0b - HA 2 TA 0 - 6.6.0.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-RW GCE-8160B >Version: 1.02 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L250R0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8160B D: CDRom0
SONY DVD RW DRU-820A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 211MB (216292kB)
Memory in use : 58
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.7.2006
CueSheet
7:10:59 PM #1 Text 0 File Burncd.cpp, Line 2948
SONY DVD RW DRU-820A
Power-Burn activated
7:10:59 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
7:10:59 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
7:11:04 PM #4 Phase 40 File dlgbrnst.cpp, Line 1832
Aborted by user
7:11:04 PM #5 Text 0 File DlgWaitCD.cpp, Line 272
Disc check failed: Medium not allowed (Wrong CD)
7:11:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)
7:11:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: SONY DVD RW DRU-820A
Medium not present
7:11:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: DVD+R. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 5/24/2006 6:48:03 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19b
Recorder: <SONY DVD RW DRU-820A> Version: 2.0b - HA 2 TA 0 - 6.6.0.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-RW GCE-8160B >Version: 1.02 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L250R0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8160B D: CDRom0
SONY DVD RW DRU-820A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523568kB)
Free physical memory: 235MB (241408kB)
Memory in use : 53
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.7.2006
CueSheet
7:14:35 PM #1 Text 0 File Burncd.cpp, Line 2948
SONY DVD RW DRU-820A
Power-Burn activated
7:14:35 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
7:14:35 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using CD-R/RW media
7:15:45 PM #4 Phase 40 File dlgbrnst.cpp, Line 1832
Aborted by user
7:15:45 PM #5 Text 0 File DlgWaitCD.cpp, Line 272
Disc check failed: Medium not writable (Wrong CD)
7:15:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)
7:15:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: SONY DVD RW DRU-820A
Medium not present
7:15:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 5/24/2006 6:48:03 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 10. July 2006 @ 18:50
|
Member
|
10. July 2006 @ 18:43 |
Link to this message
|
well you successfully removed the first set of serials but there are still 2 sets there :) u might wanna edit those out or people might steal them.
Quote:
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19b
i think 6.6.0.18 is a more stable version and the otehrs have some bugs. write down your serial #s, uninstall your Nero, run this clean tool: http://ww2.nero.com/nero6/eng/Nero_6_CleanTool.html
then download 6.6.0.18 from here:
http://www.filehippo.com/download_nero_burning_rom/?539
and install it.
Quote:
Compilation cannot be written on that medium type.
(Medium in drive: DVD+R. Medium required by compilation: CD-R/RW.)
Quote:
Disc not writeable. Insert writeable disc.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
are you sure your telling it to do the correct thing? it seems taht it thinks you need a CD-R instead of DVD.
anyway as far as i can tell teh other stuff looks good (firmware, mem usage, etc.) but im not positive. sum1 like binkie or gwen would know better.
try to change versions and see if it works. if it doesnt let us know and post anotehr log.
|
Moderator
|
10. July 2006 @ 18:58 |
Link to this message
|
Hi kibblz
Good advice by Xevlys.
What your burning looks like it need's a CD not a DVD like Xevlys said.
What brand of CD's are you using? Your drive isn't recogninzing it.
Quote:
the hard drive that was causing the errors and the problems burning, which turns out they were right on one front.
Can you give us some more details on this and the funky error messages?
Was it fixed? What happened?
oh and you did to edit the post(s) still for language and serial #'s
This message has been edited since posting. Last time this message was edited on 10. July 2006 @ 18:59
|
|
kibblz
Junior Member
|
10. July 2006 @ 20:04 |
Link to this message
|
those errors about having the wrong kind of disc was me being an idiot and trying to put a VCD onto a dvd. sorry for the mix up. Also, I conducted a later test where i tried to use vision express to just burn a DivX file straight to the dvd, but it did the same thing (read thread title). So im still baffled =-\
|
Moderator
|
10. July 2006 @ 20:18 |
Link to this message
|
|
@kibblz
Read the thread title earlier but still need a little info on the pc bit (see above post & what the pc repair shop said, what was fixed etc)More info is better on this so we know which way to go and maybe not tell you to do redundant things.
The one log does show you putting a cd in but your drive not recognizing it.
Fom what I understand you would use the data option like you are to do these w/o converting.
Only the 1st post left to edit(language bit - 1st one)
|
Member
|
10. July 2006 @ 20:24 |
Link to this message
|
|
Also, if thsoe logs arent the ones you are having troble with could u please post the ones for the DVD burning?
|
|
kibblz
Junior Member
|
10. July 2006 @ 20:24 |
Link to this message
|
|
The good people at future shop put in a brand new hard drive and installed a usb 2.0.
|
|
kibblz
Junior Member
|
10. July 2006 @ 20:30 |
Link to this message
|
There was only one log report in there, and the last burn test i did was DivX data dvd.
|
Moderator
|
10. July 2006 @ 20:32 |
Link to this message
|
|
Post that one then - the logs above are from 7/2 & 7/3.
Wht cd's are you using?
|
|
kibblz
Junior Member
|
10. July 2006 @ 20:35 |
Link to this message
|
there was only one long txt that was in the Nero folder. That one is the log posted above.
|
Member
|
10. July 2006 @ 21:09 |
Link to this message
|
|
did u try switching versions yet?
|
|
kibblz
Junior Member
|
13. July 2006 @ 19:15 |
Link to this message
|
|
Changed vers and bought some better quality DVDs and it works perfectly. Not sure which one did the trick but im just happy that it works a month and a half after i bought it. Now i just gotta figure out how to get rid of the fuzzy line and the bottom of some of my files
This message has been edited since posting. Last time this message was edited on 13. July 2006 @ 19:23
|
|
Advertisement
|
|
|
Member
|
13. July 2006 @ 19:30 |
Link to this message
|
|
glad you got it working. happy to help :)
|
|
