|
|
|
Burn fail BackItUp, but OK BurningROM
|
|
|
2speed
Newbie
|
2. August 2006 @ 07:12 |
Link to this message
|
I have run into troubles trying to get Nero BackItUp 2 to burn a backup to DVD successfully.
I tried:
-Nero Burning ROM, same set of files: success & verified OK
-Nero BackItUp image (to Hard Disk): success & verified OK
-Nero BackItUp Burn (to DVD): failed verification on several clusters
I first ran on Nero 7.2.3.2b, then reinstalled with 7.0.8.2 with same outcome.
I have most recent firmware, I believe (KYS4) for my Sony DW-Q28A.
Norton AntiVirus is disabled.
Files being backed up are non-volatile (unchanging, non-system).
I ran MemTest86+ on my 3GB RAM and was successful on 7+ passes.
Computer is AMD64 3800 x 2 with no other apps running.
-No compression, no encryption, "old backup style"
-I tried a burn @ 8x (max), and it failed.
-I tried a burn @ 4x (min), and it failed.
Media is Taiyo Yuden 8x DVD-R (single layer), which should be high quality.
I then ran CD/DVD InfoTool and performed a Quality Test on one of the 8x burns: -It shows 95% quality rating with a max PI of 2, no PO.
Any help or suggestions would be greatly appreciated!!
Thanks.
This message has been edited since posting. Last time this message was edited on 2. August 2006 @ 07:21
|
|
2speed
Newbie
|
2. August 2006 @ 07:19 |
Link to this message
|
I usually get 2 or more sector verification failures:
"Sector ###### on disc has different content to source"
My log file from the BackItUp failed burn:
-----
07:47:02 AM Nero BackItUp : 2.0.6.1
07:47:02 AM [Backup Process]
07:47:02 AM Microsoft Windows XP
07:47:02 AM Backup name: ETest2_DVD
07:47:02 AM Created by: XX
07:47:02 AM LOG creation date: 2006/08/02
07:47:02 AM Reading source path information using (Files excluded for all backups) filter profile. This process may take several minutes.
Source file: BackupDocBase.cpp, Line: 433
07:47:03 AM Full backup operation started.
Source file: BackupDocBase.cpp, Line: 1474
07:47:03 AM User selected path list is used
07:47:03 AM Folders: 67, Files: 3068, Data size: 2249292377
07:47:03 AM Compression: Off, Level: 2, Encryption: Off, Verification: On, Virus scan: Off
07:47:03 AM Backup type: 0, Direct compression: Off, New format backup: Off
07:47:03 AM Source medium type : HDD
07:47:03 AM Target medium type : Disc
07:47:03 AM Preparing shadow copy for backup. Please wait...
Source file: NBVssRequester.cpp, Line: 101
07:47:34 AM Cancel has been called for operation: GatherWriterMetadata.
Source file: NBVssRequester.cpp, Line: 643
07:47:39 AM Cancel has been called for operation: PrepareForBackup.
Source file: NBVssRequester.cpp, Line: 643
07:47:53 AM Cancel has been called for operation: DoSnapshotSet.
Source file: NBVssRequester.cpp, Line: 643
07:47:53 AM Shadow copy has been created successfully. Files will be read from shadow copy.
Source file: BackupDocBase.cpp, Line: 8152
07:47:53 AM Space available for backup: 4686348288
Source file: BackupDocBase.cpp, Line: 3522
07:47:53 AM Start of checking for temporary files
Source file: BackupDocBase.cpp, Line: 1867
07:47:53 AM ReadMe.txt file is not available on disc. A new file will be created.
Source file: BackupDocBase.cpp, Line: 4106
07:49:17 AM Checking for temporary files completed
Source file: BackupDocBase.cpp, Line: 1992
07:49:18 AM Burning speed set by Nero BackItUp: 11080 KB
Source file: NeroInterfaceImpl.cpp, Line: 1096
07:49:19 AM Caching of files started
07:49:19 AM Caching of files completed
07:49:19 AM Burn process started at 8x (11,080 KB/s)
07:54:03 AM Writing short lead-out
07:54:41 AM Burn process completed successfully at 8x (11,080 KB/s)
07:54:41 AM Data verification started
07:56:55 AM Sector 332617 on disc has different content to source
08:00:30 AM Sector 334307 on disc has different content to source
08:00:30 AM Data verification failed
===================================================================
1CXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Nero BackItUp\NeroFiles\
Application: Ahead\Nero BackItUp
Internal Version: 7, 0, 8, 2
Recorder: <SONY DVD RW DW-Q28A> Version: KYS4 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L250R0 atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG HD160JJ/P atapi Port 3 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 5 ID 0 DMA: On
DiskPeripheral : SiImage Elephant Si3114r5 Port 6 ID 16 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 6 ID 31 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-Q28A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.8.2006
NeroAPI
7:49:18 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
7:49:18 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
7:49:18 AM #3 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DW-Q28A running
7:49:18 AM #4 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:49:18 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:49:18 AM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
7:49:19 AM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1101279 (244:43.54, 2150MB)
7:49:19 AM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
7:49:19 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
7:49:19 AM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:49:19 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1101280 (1101280) = #1101280/244:43.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1101280 blocks [D: SONY DVD RW DW-Q28A]
--------------------------------------------------------------
7:49:19 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DW-Q28A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2255421440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1101280 | lead-out | 1 | 0x41 | 0x00
7:49:19 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:49:19 AM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:49:19 AM #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
7:49:19 AM #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
7:49:19 AM #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
7:49:19 AM #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)
7:49:19 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:49:19 AM #20 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode for Multisession
7:49:19 AM #21 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: No
7:49:19 AM #22 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:53:57 AM #23 Text 0 File WriterStatus.cpp, Line 116
<D: SONY DVD RW DW-Q28A> start writing Lead-Out at LBA 1101280 (10CDE0h), length 0 blocks
7:53:57 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:53:57 AM #25 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1101279
7:54:03 AM #26 Phase 133 File APIProgress.cpp, Line 278
Writing short lead-out
7:54:41 AM #27 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)
7:54:41 AM #28 Phase 78 File APIProgress.cpp, Line 278
Data verification started
7:56:55 AM #29 SectorVerify 11 File Cdrdrv.cpp, Line 9785
Sector 332617 on disc has different content to source
8:00:30 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:00:30 AM #31 SectorVerify 11 File Cdrdrv.cpp, Line 9785
Sector 334307 on disc has different content to source
8:00:30 AM #32 Phase 81 File APIProgress.cpp, Line 278
Data verification failed
8:00:30 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
8:00:30 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 7/19/2006 8:31:12 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
===================================================================
08:00:47 AM Backup process failed.
Source file: BackupDocBase.cpp, Line: 1628
|
|
