|
|
|
Nero 6.6.1.4 slow burns from 6minutes to 46 minutes?
|
|
|
SFGary
Newbie
|
14. August 2006 @ 15:07 |
Link to this message
|
I hope some of you reading this can help me. I have an OEM version, 6.6.1.4, of Nero burning software - Nero Smart Start. I guess this is
the same as Nero Burning rom? I used to be able to burn (no encode) a 4.2 Gig data DVD or an ISO file of 4Gig at 12x in about 5-6 minutes and at 16x it would be around 4 and a half minutes. A couple of days ago it slowed to around 45 minutes whether it was at 12 or 16x speeds.
I have a Fujitsu 1.8 G Lifebook with 1Gig RAM
(I checked to see if it was DMA enabled after reading here): yes
Plextor 740UF burner (firmware updated)
120Gig HD
USB 2.0 Cardbus card.
Use Verbatim DVD-Rs exclusively upto 16x.
I noticed the problem after I ran Tenebril's Spycatcher, Spybot and Adaware to find and delete/quarantine the usual suspect
intruders and I got a "General Extraction error location IMP1" error when I put in a blank DVD-R in the Recorder. So I uninstalled any software I had installed recently, which was Ghostsurf by tenebril. I reinstalled Nero 6.6.1.4 and got the recorder to work but at incredibly slow speeds as explained above. I have also attached a log file after the most recent burn for ref:
Gary
*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 12/7/2000 5:00:00 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <PLEXTOR DVDR PX-740A> Version: 1.02 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST9120821A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R2212 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R2212 E: CDRom0
Generic DVD-ROM F: CDRom1
PLEXTOR DVDR PX-740A G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 339MB (347656kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.8.2006
Burn DVD Image
12:58:16 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
12:58:16 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
12:58:16 PM #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-740A running
12:58:16 PM #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
12:58:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2036762 (452:36.62, 3978MB)
12:58:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:58:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: PLEXTOR DVDR PX-740A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
12:58:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:58:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2036763 (2036763) = #2036763/452:36.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2036763 blocks [PLEXTOR DVDR PX-740A]
--------------------------------------------------------------
12:58:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [PLEXTOR DVDR PX-740A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4171290624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2036763 | lead-out | 1 | 0x41 | 0x00
12:58:16 PM #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:58:16 PM #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:58:16 PM #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
12:58:16 PM #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
12:58:16 PM #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
12:58:16 PM #16 Phase 65 File dlgbrnst.cpp, Line 1685
Burn process started
12:58:16 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:58:16 PM #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
12:58:16 PM #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
12:58:16 PM #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:44:35 PM #21 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-740A > start writing Lead-Out at LBA 2036763 (1F141Bh), lenght 0 blocks
1:44:36 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:44:36 PM #23 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2036751
1:44:58 PM #24 Phase 66 File dlgbrnst.cpp, Line 1685
Burn process completed successfully
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.34a, size=16288 bytes, created 2/27/2002 8:24:56 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:41 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
laddyboy
AfterDawn Addict
|
14. August 2006 @ 16:12 |
Link to this message
|
|
|
|
SFGary
Newbie
|
14. August 2006 @ 16:30 |
Link to this message
|
Thanks for the quick feedback laddyboy, I'll try the older version though I've never had problems with Nero b4. I'll also switch to the 1394 mode to see if that helps. If that does not work I'll try DVD decryptor.
|
|
