|
|
|
Burn failed again
|
|
|
Haomaru
Junior Member
|
21. August 2006 @ 15:12 |
Link to this message
|
I just don't know i started getting burn failed again, heres the log and by the way in the error msg. Nero says PMA update failure, then below that it says could not perform end of disc-at-once, help please. Here's the log below
5c82-0010-8011-0000-8448-XXXX-XXXX
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SOHD-16P9S >Version: FS09 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120213A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NN4653H WXG251Y 2.0B vaxscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B E: CDRom0
LITE-ON DVD SOHD-16P9S F: CDRom1
NN4653H WXG251Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 1070MB (1096644kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.8.2006
UDF/ISO compilation
6:05:36 AM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
6:05:37 AM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
6:05:37 AM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:05:37 AM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
6:05:37 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
6:05:37 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
6:05:37 AM #7 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4160B running
6:05:37 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:05:37 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:05:37 AM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
6:05:37 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2031391 (451:25.16, 3967MB)
6:05:37 AM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
6:05:37 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R
Disc Manufacturer: GSC003 -
Disc Application Code: 64, Disc Physical Code: 193
6:05:37 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:05:37 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2031392 (2031392) = #2031392/451:25.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2031392 blocks [E: HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------
6:05:37 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4160290816, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2031392 | lead-out | 1 | 0x41 | 0x00
6:05:37 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:05:37 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:05:37 AM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
6:05:37 AM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
6:05:37 AM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
6:05:37 AM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
6:05:37 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:05:37 AM #24 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
6:05:37 AM #25 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
6:05:37 AM #26 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:06:02 AM #27 SPTI -1194 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 38 00 0C 73 04
Buffer x0b250000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6:06:02 AM #28 CDR -1194 File Writer.cpp, Line 302
PMA update failure
E: HL-DT-ST DVDRAM GSA-4160B
6:06:02 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:06:03 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:06:03 AM #31 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was -1
6:06:03 AM #32 CDR -1194 File WriterStatus.cpp, Line 167
PMA update failure
E: HL-DT-ST DVDRAM GSA-4160B
6:06:03 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
6:06:03 AM #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Moderator
|
21. August 2006 @ 19:00 |
Link to this message
|
|
Hi Haomaru
Biggest thing I see wrong in the log is the discs you are using - Disc Manufacturer: GSC003
Not a better manufacturer. Your firmware is up to date, good memory etc but the the drive doesn't like these discs. The failure happens in like 35 secs.
Better to try would be Verbatim or made in Japan only Sony, Fuji or Maxell.
|
|
Haomaru
Junior Member
|
21. August 2006 @ 20:30 |
Link to this message
|
|
Ok thanks much Binkie i'll try those
|
|
aabbccdd
Suspended permanently
|
21. August 2006 @ 21:21 |
Link to this message
|
|
yup Taiyo Yuden and or Verbatim is the best stuff to use
|
|
Haomaru
Junior Member
|
22. August 2006 @ 01:58 |
Link to this message
|
|
Does Taiyo Yuden has a next name ? and which one should i use 8x or 4x ?
|
|
Haomaru
Junior Member
|
22. August 2006 @ 03:01 |
Link to this message
|
And a next thing does the Nero version matter what i am using, cause i am wondering if the version Nero i am using is the reason why my burner is giving me so many burn failed the verison i am using is 7.0.8.2
|
Senior Member
|
22. August 2006 @ 08:02 |
Link to this message
|
Quote:
Does Taiyo Yuden has a next name ?
Not sure what u mean?
for the 8 or 4 speed it doesn't matter as Taiyo Yuden is the best media out there, just depends on ur preference.
For the Nero version, the one u r using is the most stable version of the 7's
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
Haomaru
Junior Member
|
22. August 2006 @ 08:15 |
Link to this message
|
|
K thanks, well the reason i ask if it has a next name is because, i had showed a log previously and someone said i was using the Taiyo Yuden which is good quality, but the name of the blanks i was using at the time was Matrix -R 8X blank DVDS.
|
|
aabbccdd
Suspended permanently
|
22. August 2006 @ 10:06 |
Link to this message
|
|
Haomaru , the Taiyo Yuden brand can be found under Sony and Fujifilm label that are Made In Japan
|
|
Haomaru
Junior Member
|
22. August 2006 @ 12:07 |
Link to this message
|
|
K thanks AA
|
|
Haomaru
Junior Member
|
22. August 2006 @ 12:59 |
Link to this message
|
Well thanks for all the help, i bought some Fuji film 8x that says made in Taiwan, but when i burn at 8x it gives me failed, but when i burn at 4x it's successful, i am using a LG burner anyone else using a LG burner having the same problems writing at 8X? here's the log
5c82-0010-8011-0000-8448-XXXX-XXXX
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A306 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVD SOHD-16P9S >Version: FS09 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120213A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVD SOHD-16P9S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NN4653H WXG251Y 2.0B vaxscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4160B E: CDRom0
LITE-ON DVD SOHD-16P9S F: CDRom1
NN4653H WXG251Y G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 874MB (895040kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.8.2006
UDF/ISO compilation
3:44:41 AM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
3:44:41 AM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
3:44:41 AM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:44:41 AM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
3:44:41 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
3:44:41 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
3:44:41 AM #7 Text 0 File Writer.cpp, Line 113
Writer E: HL-DT-ST DVDRAM GSA-4160B running
3:44:41 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:44:42 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:44:42 AM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
3:44:42 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1772655 (393:55.30, 3462MB)
3:44:42 AM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
3:44:42 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R
Disc Manufacturer: Prodis - cF01
Disc Application Code: 64, Disc Physical Code: 193
3:44:42 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:44:42 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1772656 (1772656) = #1772656/393:55.31
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1772656 blocks [E: HL-DT-ST DVDRAM GSA-4160B]
--------------------------------------------------------------
3:44:42 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3630399488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1772656 | lead-out | 1 | 0x41 | 0x00
3:44:42 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:44:42 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:44:42 AM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
3:44:42 AM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
3:44:42 AM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
3:44:42 AM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
3:44:42 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:44:42 AM #24 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
3:44:42 AM #25 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
3:44:42 AM #26 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:45:52 AM #27 SPTI -1194 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1194)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 38 00 0C 73 04
Buffer x044d0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3:45:52 AM #28 CDR -1194 File Writer.cpp, Line 302
PMA update failure
E: HL-DT-ST DVDRAM GSA-4160B
3:45:52 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:45:52 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:45:52 AM #31 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was -1
3:46:19 AM #32 CDR -1194 File WriterStatus.cpp, Line 167
PMA update failure
E: HL-DT-ST DVDRAM GSA-4160B
3:46:19 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:46:19 AM #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
22. August 2006 @ 16:21 |
Link to this message
|
Those mit Fuji's are made by Prodisc - okay at best.
For those keep the burn speed at 4x. Looks like your burner doesn't like burning at 8x for these.
If you want to burn at 8x better to get the mij Fuji's or Sony which usually are made by Taiyo Yuden or Verbatim.
You can also get Taiyo online from reputable sites.
For the Matrix - you may have posted a log that had a TY media code in it. To see if they are the real deal check the code on the back by the inner hub.
For 8x -R's it would be GG00xxxx (x's represnt #'s)
You can try ImgBurn (free) to burn too - great burner.
http://imgburn.com
|
|
Haomaru
Junior Member
|
22. August 2006 @ 17:20 |
Link to this message
|
|
K thanks once again
|
|
aabbccdd
Suspended permanently
|
22. August 2006 @ 21:20 |
Link to this message
|
|
Haomaru , i would stay away from the fujifilm MIT that code out as prodisc "not good stuff" they will be a mess in a matter of a couple months read errors etc. actually your best bet is to buy Taiyo Yuden online at supermediastore.com
|
|
Advertisement
|
|
|
|
Haomaru
Junior Member
|
23. August 2006 @ 02:04 |
Link to this message
|
|
K i won't bother with those then aa
|
|
