|
|
|
intermittent problems burning dvds
|
|
|
jwelsh
Newbie
|
22. August 2006 @ 15:14 |
Link to this message
|
Hi all. I've been trying to burn ISO's to dvd and I had a 4 gig one burn fine today, but then I tried burning a 2 gig one and I had a burn process failed error from Nero. I'm using datawrite titanium DVD+R's 8 speed and there's definately no problem with the discs, I'm just unsure if it's just being tempremental with some ISO's or if the drive is actually on it's way out. It shouldn't be because I only built my PC about 2 years ago. Below is the error report from Nero and if any of you could lend me some advice it would be very appreciated, as if the drive is dodgy, I'll know to buy a new one instead of wasting discs. Thanks in advance, James.
p.s. G Drive is a virtual drive, running due to Daemon Tools.
*** Nero ERROR REPORT ***
I've removed this line as it may be the serial key, I'm not sure.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0 (Nero Express)
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <FJ5153T ZJZ352R >Version: 1.0 - HA 1 TA 2 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3500AG atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON CD-RW SOHR-5238S atapi Port 0 ID 1 DMA: On
DiskPeripheral : C_DRIVE iaStor Port 2 ID 0 DMA: On
DiskPeripheral : ST3300831AS iaStor Port 2 ID 1 DMA: Off
CdRomPeripheral : FJ5153T ZJZ352R 1.0 dtscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3500AG E: CDRom0
LITE-ON CD-RW SOHR-5238S F: CDRom1
FJ5153T ZJZ352R G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047908kB)
Free physical memory: 336MB (344764kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
22.8.2006
Burn DVD Image
19:22:56 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
19:22:56 #2 Text 0 File Reader.cpp, Line 124
Reader running
19:22:56 #3 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-3500AG running
19:22:56 #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
19:22:56 #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1419265 (315:23.40, 2772MB)
19:22:56 #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
19:22:56 #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: _NEC DVD_RW ND-3500AG, Media type: DVD+R
19:22:56 #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:22:56 #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1419266 (1419266) = #1419266/315:23.41
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1419266 blocks [E: _NEC DVD_RW ND-3500AG]
--------------------------------------------------------------
19:22:56 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: _NEC DVD_RW ND-3500AG] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2906656768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1419266 | lead-out | 1 | 0x41 | 0x00
19:22:56 #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
19:22:57 #12 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
19:22:57 #13 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
19:22:57 #14 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
19:22:57 #15 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11,080 KB/s)
19:22:57 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
19:22:57 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x0389c200: Len x804
19:22:57 #18 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03893000: Len x6
19:22:57 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03893000: Len x6
19:22:57 #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
19:23:30 #21 SPTI -1106 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x04de0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
19:23:30 #22 CDR -1106 File Writer.cpp, Line 302
Power calibration error
E: _NEC DVD_RW ND-3500AG
19:23:30 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
19:23:30 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
19:23:30 #25 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
19:23:30 #26 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
19:23:30 #27 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x038bf600: Len x6
19:23:30 #28 SPTI -1065 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x038bf600: Len x6
19:23:30 #29 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22:16:24
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16/05/2006 21:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 04/08/2004 13:00:00 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Moderator
|
22. August 2006 @ 17:55 |
Link to this message
|
|
AfterDawn Addict
|
22. August 2006 @ 17:56 |
Link to this message
|
Quote:
Nero Version: 7.0.0.0 (Nero Express)
This is the first version of Nero7, it is "buggy", uninstall, run this clean tool,http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install this more stable version, 7.0.8.2 from here
http://www.filehippo.com/download_nero_7_premium/?845
Dont be tempted to choose any newer versions as they are also "buggy"
Quote:
Recorder: <_NEC DVD_RW ND-3500AG> Version: 2.16
Update firmware to 2.58 from here
ftp://ftp.packardbell.com/pub/itemnr/6952750000/k3500pb.exe
Quote:
Burn process started at 8x (11,080 KB/s)
Slow to 4X
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22:16:24
You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
|
AfterDawn Addict
|
22. August 2006 @ 17:57 |
Link to this message
|
|
@binkie7, My goodness you're fast, Cheers.
|
Moderator
|
22. August 2006 @ 19:39 |
Link to this message
|
@gwen
LOL - not on Nero logs - take me while to type :)
|
|
Advertisement
|
|
|
|
jwelsh
Newbie
|
23. August 2006 @ 04:07 |
Link to this message
|
Thanks a lot for the help, I have just flashed the firmwire, run the roxio zap tool, run the Nero clean tool and installed my previous version of Nero 5.5.10.53 which was supplied with the drive. I have just burned the image which was troublesome and it burned successfully at 8 speed, so hopefully all is now ok. thanks again for the help!
You'll Never Walk Alone
|
|
