|
|
|
burn error lite-on anyone point me in a direction
|
|
|
byron007
Suspended due to non-functional email address
|
23. October 2006 @ 04:20 |
Link to this message
|
forums point me in all directions. i have oem Nero express 6 and oem lite-on 1633s dvdrw drive. my dma is on. all files in Nero tools seem fine...primary master and slave set. what about the system aspi? it says "not installed" in my Nero toolkit. though people say that doesnt matter. i updated the flash bios. all that updated was the ability to burn in all regions. i updated Nero drivers. that added a cinema program to my files and i still got the same error..and lost all my codecs and dvd player in process. so i dont know if i want to try that again... but it sounds like something is shutting off my burners ability to write, and i wonder if its the disc brand or the dvdburner is faulty now?
i just bought a 50 pack spindle of fujifilm DVD-R discs, as i have been using fuji +w with no problems., but this brand is giving me headaches. i just threw out my sony rws as my dvd player wont read them.
does my error message sound like the disc is my problem? or is my dvdwriter dying?
my errors vary. sometimes it says burn error. illegal disc error. ending communication. now it just says "burn failed at 4x" when i slow the burn. i really dont want to buy more discs, hmmm. after going through 100 duds....
i look at the error log, and i don't know where to start looking for where the problem stems. how can i tell if my dvdrw is capable of writing still? i know it can read information.
i reinstalled my whole o/s. Nero and dvd burner included in bundle. no further ahead. here's my burn log. thanks to anyone for helping me
help!
|
|
byron007
Suspended due to non-functional email address
|
23. October 2006 @ 04:31 |
Link to this message
|
oh yeah my specs
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 0 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD2500JD-22HBC0 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
HL-DT-ST DVD-ROM GDR8163 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2037MB (2086676kB)
Free physical memory: 1544MB (1581632kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.10.2006
NeroAPI
4:53:07 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
4:53:07 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
4:53:07 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
4:53:07 AM #4 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B045000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
4:53:07 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
4:53:07 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:53:07 AM #7 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running
4:53:07 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
4:53:07 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
4:53:07 AM #10 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media
4:53:07 AM #11 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
4:53:07 AM #12 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO
4:53:07 AM #13 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
4:53:07 AM #14 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:53:07 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
4:53:07 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41
4:53:07 AM #17 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
4:53:07 AM #18 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
4:53:07 AM #19 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
4:53:07 AM #20 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)
4:53:07 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:53:07 AM #22 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
4:53:07 AM #23 Text 0 File Mmc.cpp, Line 20394
Set BUFE: supported -> ON , SMART-BURN : ON
4:53:07 AM #24 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
4:53:07 AM #25 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:53:07 AM #26 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0BC14000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
4:53:09 AM #27 SCSI -1046 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x015D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
4:53:09 AM #28 CDR -1046 File Writer.cpp, Line 304
Illegal disc
4:53:09 AM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:53:09 AM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
4:53:09 AM #31 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was -1
4:53:09 AM #32 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0BC13000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
4:53:09 AM #33 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)
4:53:09 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
4:53:09 AM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
4:53:10 AM #36 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B046000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.02a, size=19840 bytes, created 8/10/2004 10:39:56 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
help!
|
|
