|
|
|
rebuilder speeds with amd/intel
|
|
|
pahick
Junior Member
|
29. October 2006 @ 18:00 |
Link to this message
|
I just upgraded from a AMD 1600 to an AM2 X2 3800 oc'd to 2.4 1G pc6400 and I was wondering if anyone has a new Intel Conroe system to see how they compare. I was going to go with a Conroe but this was cheaper. Heres a log of Scarface Platinum I just backed up...
[16:32:57] One Click encoding activated...
-----------------
[16:32:58] Phase I, PREPARATION started.
- DVD-RB v1.11.0
- AVISYNTH 2.5.6.0
- CCE 2.70.2.10 encoder selected.
- VTS_01: 3,929,021 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 244,505 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 56.2%
- Overall bitrate : 3,266/2,612Kbs
- Space for Video : 3,252,184KB
- HIGH/LOW/TYPICAL Bitrates: 2,950/786/2,612 Kbs
[16:36:04] Phase I, PREPARATION completed in 4 minutes.
[16:36:04] Phase II ENCODING started
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_01 segment 26
- Creating M2V for VTS_01 segment 27
- Creating M2V for VTS_01 segment 28
- Creating M2V for VTS_01 segment 29
- Creating M2V for VTS_01 segment 30
- Creating M2V for VTS_01 segment 31
- Creating M2V for VTS_01 segment 32
- Creating M2V for VTS_01 segment 33
- Creating M2V for VTS_01 segment 34
- Creating M2V for VTS_01 segment 35
- Extracting STILLS for VTS_01 segment 36
[17:40:56] Phase II ENCODING completed in 64 minutes.
[17:40:56] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Rebuilding seg 2 VOBID 1 CELLID 3
- Rebuilding seg 3 VOBID 1 CELLID 4
- Rebuilding seg 4 VOBID 1 CELLID 5
- Rebuilding seg 5 VOBID 1 CELLID 6
- Rebuilding seg 6 VOBID 1 CELLID 7
- Rebuilding seg 7 VOBID 1 CELLID 8
- Rebuilding seg 8 VOBID 1 CELLID 9
- Rebuilding seg 9 VOBID 1 CELLID 10
- Rebuilding seg 10 VOBID 1 CELLID 11
- Rebuilding seg 11 VOBID 1 CELLID 12
- Rebuilding seg 12 VOBID 1 CELLID 13
- Rebuilding seg 13 VOBID 1 CELLID 14
- Rebuilding seg 14 VOBID 1 CELLID 15
- Rebuilding seg 15 VOBID 1 CELLID 16
- Rebuilding seg 16 VOBID 1 CELLID 17
- Rebuilding seg 17 VOBID 1 CELLID 18
- Rebuilding seg 18 VOBID 1 CELLID 19
- Rebuilding seg 19 VOBID 1 CELLID 20
- Rebuilding seg 20 VOBID 1 CELLID 21
- Rebuilding seg 21 VOBID 1 CELLID 22
- Rebuilding seg 22 VOBID 1 CELLID 23
- Rebuilding seg 23 VOBID 1 CELLID 24
- Rebuilding seg 24 VOBID 1 CELLID 25
- Rebuilding seg 25 VOBID 1 CELLID 26
- Rebuilding seg 26 VOBID 1 CELLID 27
- Rebuilding seg 27 VOBID 1 CELLID 28
- Rebuilding seg 28 VOBID 1 CELLID 29
- Rebuilding seg 29 VOBID 1 CELLID 30
- Rebuilding seg 30 VOBID 1 CELLID 31
- Rebuilding seg 31 VOBID 1 CELLID 32
- Rebuilding seg 32 VOBID 1 CELLID 33
- Rebuilding seg 33 VOBID 1 CELLID 34
- Rebuilding seg 34 VOBID 1 CELLID 35
- Rebuilding seg 35 VOBID 1 CELLID 36
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 36 VOBID 2 CELLID 1
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Correcting VTS Sectors...
[17:50:38] Phase III, REBUILD completed in 10 minutes.
Done.
[17:50:38] PREPARE/ENCODE/REBUILD completed in 78 min.
Is the new Intel systems that much quicker? I am really getting used to rebuilder and love the quality(pricey so it better look good..lol) I work alot of overtime at my job so a system that takes less time gives me more time to watch the movies.
EDIT**
sorry,didnt see other thread concerning cpu's. havent been feeling well and have a headache from hell!
This message has been edited since posting. Last time this message was edited on 29. October 2006 @ 18:07
|
|
Advertisement
|
 |
|
|
Senior Member
|
30. October 2006 @ 04:57 |
Link to this message
|
I processed M:I 3, full disc (movie, menus, extras), at 3 passes, in 112 min (including ISO creation) with an E6400 at stock speeds... I have since OC'ed it to 2.88. If we can find a common title, I'll be happy to process and compare. I have CCE 2.67...
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD. |
|
pahick
Junior Member
|
30. October 2006 @ 05:11 |
Link to this message
|
|
Would you happen to have Monster House? I already backed up my copy with CloneDVD2/AnyDVD but im going to do it with RB in a couple minutes. Im getting ready for work, but will post the results if thats a suitable title. Use 3 passes, no stealing from extras? Is that ok?
|
Senior Member
|
30. October 2006 @ 17:27 |
Link to this message
|
|
Sorry... Already gave that one to my niece and nephew...
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD. |
Senior Member
|
31. October 2006 @ 02:23 |
Link to this message
|
Upped my E6400 to 3.0GHz now...
Here's log for M:I:3 (full disc, 3 passes, menu encoding enabled, no stealing space from extras, english audio and subtitles, no DTS audio). This is a 7.68GB folder:
Stock speeds
[15:09:40] One Click encoding activated...
-----------------
[15:09:40] Phase I, PREPARATION started.
- DVD-RB v1.11.0
- AVISYNTH 2.5.6.0
- CCE 2.62+ encoder selected.
...
-- Processed 8,002 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 52.5%
- Overall bitrate : 3,488/2,791Kbs
- Space for Video : 3,696,738KB
- HIGH/LOW/TYPICAL Bitrates: 8,360/372/2,791 Kbs
[15:12:23] Phase I, PREPARATION completed in 3 minutes.
[15:12:23] Phase II ENCODING started
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
...
- Extracting STILLS for VTS_06 segment 11
[16:52:33] Phase II ENCODING completed in 100 minutes.
[16:52:33] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_02
- Reading/processing TMAP table...
...
- Updated IFO: VTS_04_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[17:04:57] Phase III, REBUILD completed in 12 minutes.
Done.
[17:04:57] PREPARE/ENCODE/REBUILD completed in 115 min.
O/C'ed to 3.0GHZ
[22:31:19] One Click encoding activated...
-----------------
[22:31:19] Phase I, PREPARATION started.
- DVD-RB v1.11.0
- AVISYNTH 2.5.6.0
- CCE 2.62+ encoder selected.
- VTS_02: 149,620 sectors.
-- Scanning and writing .D2V & .AVS files
...
-- Processed 8,002 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 52.5%
- Overall bitrate : 3,488/2,791Kbs
- Space for Video : 3,696,738KB
- HIGH/LOW/TYPICAL Bitrates: 8,360/372/2,791 Kbs
[22:33:41] Phase I, PREPARATION completed in 2 minutes.
[22:33:41] Phase II ENCODING started
- Creating M2V for VTS_02 segment 0
...
- Extracting STILLS for VTS_06 segment 11
[23:49:42] Phase II ENCODING completed in 76 minutes.
[23:49:42] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_02
- Reading/processing TMAP table...
...
- Updated IFO: VTS_04_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[00:01:44] Phase III, REBUILD completed in 12 minutes.
Done.
[00:01:44] PREPARE/ENCODE/REBUILD completed in 90 min.
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD.This message has been edited since posting. Last time this message was edited on 31. October 2006 @ 02:28
|
|
pahick
Junior Member
|
31. October 2006 @ 03:58 |
Link to this message
|
|
Thank you for the comparison. I do not own MI3, but I can see Conroe is plenty fast. Even if I oc'd my X2 3800 to 2.7(which is its max) I couldnt get close to yours@3.0 . Im very happy with the performance ive gotten, but wish I would have went Intel. The only things that held me back was price, and the fact that I went SFF. And there arent any good Matx motherboards out yet. Maybe once quadcore arrives we will see AMD and Intel a little more closely comparable. DVD Rebuilder is a very nice program,even for the money with all the options added its very worth it. For someone with very little time to backup,let alone watch movies, you really do need a strong system. Thanks again for the logs. Take care.
X2 3800@2.4 Epox MGF6100-M 1G GSkill pc6400 (2)NEC 3550A's 74G Raptor 160G Hitachi Audigy 4 Enermax Liberty 400w PSU MicroFly case
|
|
Trom
Member
|
31. October 2006 @ 08:53 |
Link to this message
|
|
Good and all that rebuilder is I would not choose a system build based on the speed of rebuilder. I'm sure the system you built would be v.good for watching DVD's on the PC or gaming. Also when comparing you would need to take into consideration the type and amount of memory each person has and maybe the HD drive type and size and if any other processes were active at the time. IMO 78mins is a very respectable time for processing Scarface Platinum.
|
AfterDawn Addict
|
31. October 2006 @ 17:27 |
Link to this message
|
|
Hmmmm 3 PASSES completed within 90 minutes is pretty impressive. Now you guys definitely makes me want to build another system.
|
Member
|
1. November 2006 @ 03:20 |
Link to this message
|
|
damn that is fast...how much longer will it take if you add a pass or two so its 4 passes.
BENQ 1620 / 1650
Pioneer 111L
Vobblanker/DVDRebuilder
|
Senior Member
|
14. November 2006 @ 14:15 |
Link to this message
|
O/C'ed to 3.2 now... I think I am gonna stay put here...
Here's The Da Vinci Code (7.59 GB) with CCE @ 3 passes, full disc, English subtitles, No stealing space from extras, no DTS audio, output to ISO:
[17:43:16] One Click encoding activated...
-----------------
[17:43:16] Phase I, PREPARATION started.
- DVD-RB v1.12.1
- AVISYNTH 2.5.6.0
- CCE 2.62+ encoder selected.
- VTSM_01: 121,988 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 8,991 frames.
-- Building .AVS and .ECL files
- VTS_01: 3,279,605 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 214,248 frames.
-- Building .AVS and .ECL files
- VTS_02: 26,956 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,445 frames.
-- Building .AVS and .ECL files
- VTS_03: 48,468 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,413 frames.
-- Building .AVS and .ECL files
- VTS_04: 50,652 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,515 frames.
-- Building .AVS and .ECL files
- VTS_05: 39,381 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,948 frames.
-- Building .AVS and .ECL files
- VTS_06: 33,178 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,030 frames.
-- Building .AVS and .ECL files
- VTS_07: 27,309 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 2,038 frames.
-- Building .AVS and .ECL files
- VTS_08: 50,733 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,590 frames.
-- Building .AVS and .ECL files
- VTS_09: 43,937 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,290 frames.
-- Building .AVS and .ECL files
- VTS_10: 51,586 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,592 frames.
-- Building .AVS and .ECL files
- VTS_11: 42,056 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,766 frames.
-- Building .AVS and .ECL files
- VTS_12: 44,458 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 3,324 frames.
-- Building .AVS and .ECL files
- VTS_13: 53,406 sectors.
-- Scanning and writing .D2V & .AVS files
-- Processed 4,930 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 59.2%
- Overall bitrate : 3,223/2,578Kbs
- Space for Video : 3,506,116KB
- HIGH/LOW/TYPICAL Bitrates: 3,136/400/2,578 Kbs
[17:45:21] Phase I, PREPARATION completed in 2 minutes.
[17:45:21] Phase II ENCODING started
- Creating M2V for VTSM_01 segment 0
- Creating M2V for VTSM_01 segment 1
- Creating M2V for VTSM_01 segment 2
- Creating M2V for VTSM_01 segment 3
- Creating M2V for VTSM_01 segment 4
- Creating M2V for VTSM_01 segment 5
- Creating M2V for VTSM_01 segment 6
- Creating M2V for VTSM_01 segment 7
- Creating M2V for VTSM_01 segment 8
- Creating M2V for VTSM_01 segment 9
- Creating M2V for VTSM_01 segment 10
- Creating M2V for VTSM_01 segment 11
- Creating M2V for VTSM_01 segment 12
- Creating M2V for VTSM_01 segment 13
- Creating M2V for VTSM_01 segment 14
- Creating M2V for VTSM_01 segment 15
- Creating M2V for VTSM_01 segment 16
- Creating M2V for VTSM_01 segment 17
- Creating M2V for VTSM_01 segment 18
- Creating M2V for VTS_01 segment 0
- Creating M2V for VTS_01 segment 1
- Creating M2V for VTS_01 segment 2
- Creating M2V for VTS_01 segment 3
- Creating M2V for VTS_01 segment 4
- Creating M2V for VTS_01 segment 5
- Creating M2V for VTS_01 segment 6
- Creating M2V for VTS_01 segment 7
- Creating M2V for VTS_01 segment 8
- Creating M2V for VTS_01 segment 9
- Creating M2V for VTS_01 segment 10
- Creating M2V for VTS_01 segment 11
- Creating M2V for VTS_01 segment 12
- Creating M2V for VTS_01 segment 13
- Creating M2V for VTS_01 segment 14
- Creating M2V for VTS_01 segment 15
- Creating M2V for VTS_01 segment 16
- Creating M2V for VTS_01 segment 17
- Creating M2V for VTS_01 segment 18
- Creating M2V for VTS_01 segment 19
- Creating M2V for VTS_01 segment 20
- Creating M2V for VTS_01 segment 21
- Creating M2V for VTS_01 segment 22
- Creating M2V for VTS_01 segment 23
- Creating M2V for VTS_01 segment 24
- Creating M2V for VTS_01 segment 25
- Creating M2V for VTS_02 segment 0
- Creating M2V for VTS_02 segment 1
- Creating M2V for VTS_03 segment 0
- Creating M2V for VTS_03 segment 1
- Creating M2V for VTS_04 segment 0
- Creating M2V for VTS_04 segment 1
- Creating M2V for VTS_05 segment 0
- Creating M2V for VTS_05 segment 1
- Creating M2V for VTS_06 segment 0
- Creating M2V for VTS_06 segment 1
- Creating M2V for VTS_07 segment 0
- Creating M2V for VTS_07 segment 1
- Creating M2V for VTS_08 segment 0
- Creating M2V for VTS_08 segment 1
- Creating M2V for VTS_09 segment 0
- Creating M2V for VTS_09 segment 1
- Creating M2V for VTS_10 segment 0
- Creating M2V for VTS_10 segment 1
- Creating M2V for VTS_11 segment 0
- Creating M2V for VTS_11 segment 1
- Creating M2V for VTS_12 segment 0
- Creating M2V for VTS_12 segment 1
- Creating M2V for VTS_13 segment 0
- Creating M2V for VTS_13 segment 1
[18:52:28] Phase II ENCODING completed in 67 minutes.
[18:52:28] Phase III, REBUILD started.
- Copying IFO, BUP, and unaltered files...
- Processing VTS_01
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 2 CELLID 10
- Rebuilding seg 1 VOBID 2 CELLID 11
- Rebuilding seg 2 VOBID 2 CELLID 12
- Rebuilding seg 3 VOBID 2 CELLID 13
- Rebuilding seg 4 VOBID 2 CELLID 14
- Rebuilding seg 5 VOBID 2 CELLID 15
- Rebuilding seg 6 VOBID 2 CELLID 16
- Rebuilding seg 7 VOBID 2 CELLID 17
- Rebuilding seg 8 VOBID 2 CELLID 18
- Rebuilding seg 9 VOBID 2 CELLID 19
- Rebuilding seg 10 VOBID 2 CELLID 20
- Rebuilding seg 11 VOBID 2 CELLID 21
- Rebuilding seg 12 VOBID 2 CELLID 22
- Rebuilding seg 13 VOBID 2 CELLID 23
- Rebuilding seg 14 VOBID 2 CELLID 24
- Rebuilding seg 15 VOBID 2 CELLID 25
- Rebuilding seg 16 VOBID 2 CELLID 26
- Rebuilding seg 17 VOBID 2 CELLID 27
- Rebuilding seg 18 VOBID 2 CELLID 28
- Rebuilding seg 19 VOBID 2 CELLID 29
- Rebuilding seg 20 VOBID 2 CELLID 30
- Rebuilding seg 21 VOBID 2 CELLID 31
- Rebuilding seg 22 VOBID 2 CELLID 32
- Rebuilding seg 23 VOBID 2 CELLID 33
- Rebuilding seg 24 VOBID 2 CELLID 34
- Rebuilding seg 25 VOBID 2 CELLID 35
- Updating NAVPACKS for VOBID_02
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Updating TMAP table...
- Processing VTS_02
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_02_0.IFO
- Updating TMAP table...
- Processing VTS_03
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_03_0.IFO
- Updating TMAP table...
- Processing VTS_04
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_04_0.IFO
- Updating TMAP table...
- Processing VTS_05
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_05_0.IFO
- Updating TMAP table...
- Processing VTS_06
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_06_0.IFO
- Updating TMAP table...
- Processing VTS_07
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_07_0.IFO
- Updating TMAP table...
- Processing VTS_08
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_08_0.IFO
- Updating TMAP table...
- Processing VTS_09
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_09_0.IFO
- Updating TMAP table...
- Processing VTS_10
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_10_0.IFO
- Updating TMAP table...
- Processing VTS_11
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_11_0.IFO
- Updating TMAP table...
- Processing VTS_12
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_12_0.IFO
- Updating TMAP table...
- Processing VTS_13
- Reading/processing TMAP table...
- Rebuilding seg 0 VOBID 1 CELLID 1
- Rebuilding seg 1 VOBID 1 CELLID 2
- Updating NAVPACKS for VOBID_01
- Updated VTS_C_ADT.
- Updated VTS_VOBU_ADMAP.
- Updated IFO: VTS_13_0.IFO
- Updating TMAP table...
- Processing VTSM_01
- Rebuilding seg 0 VOBID 1 CELLID 1
- Updating NAVPACKS for VOBID_01
- Rebuilding seg 1 VOBID 2 CELLID 1
- Rebuilding seg 2 VOBID 2 CELLID 2
- Updating NAVPACKS for VOBID_02
- Rebuilding seg 3 VOBID 3 CELLID 1
- Updating NAVPACKS for VOBID_03
- Rebuilding seg 4 VOBID 4 CELLID 1
- Rebuilding seg 5 VOBID 4 CELLID 2
- Updating NAVPACKS for VOBID_04
- Rebuilding seg 6 VOBID 5 CELLID 1
- Updating NAVPACKS for VOBID_05
- Rebuilding seg 7 VOBID 6 CELLID 1
- Updating NAVPACKS for VOBID_06
- Rebuilding seg 8 VOBID 7 CELLID 1
- Updating NAVPACKS for VOBID_07
- Rebuilding seg 9 VOBID 8 CELLID 1
- Updating NAVPACKS for VOBID_08
- Rebuilding seg 10 VOBID 9 CELLID 1
- Updating NAVPACKS for VOBID_09
- Rebuilding seg 11 VOBID 10 CELLID 1
- Updating NAVPACKS for VOBID_10
- Rebuilding seg 12 VOBID 11 CELLID 1
- Rebuilding seg 13 VOBID 11 CELLID 2
- Updating NAVPACKS for VOBID_11
- Rebuilding seg 14 VOBID 12 CELLID 1
- Updating NAVPACKS for VOBID_12
- Rebuilding seg 15 VOBID 13 CELLID 1
- Updating NAVPACKS for VOBID_13
- Rebuilding seg 16 VOBID 14 CELLID 1
- Rebuilding seg 17 VOBID 14 CELLID 2
- Updating NAVPACKS for VOBID_14
- Rebuilding seg 18 VOBID 15 CELLID 1
- Updating NAVPACKS for VOBID_15
- Updated VTSM_C_ADT.
- Updated VTSM_VOBU_ADMAP.
- Updated IFO: VTS_01_0.IFO
- Correcting VTS Sectors...
- Building ISO Image...
- Removing DVD files
- ISO Image successfully created.
[19:03:53] Phase III, REBUILD completed in 11 minutes.
Done.
[19:03:53] PREPARE/ENCODE/REBUILD completed in 80 min.
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD.This message has been edited since posting. Last time this message was edited on 14. November 2006 @ 14:16
|
|
pahick
Junior Member
|
14. November 2006 @ 18:28 |
Link to this message
|
|
very nice indeed! once quadcore come out/down in price im moving to Intel.
X2 3800@2.4 Epox MGF6100-M 1G GSkill pc6400 (2)NEC 3550A's 74G Raptor 160G Hitachi Audigy 4 Enermax Liberty 400w PSU MicroFly case
|
|
Advertisement
|
|
|
Senior Member
|
15. November 2006 @ 05:06 |
Link to this message
|
|
If these speeds continue to increase by the same margin with the quad core, there will be little need for me to use Recode2 or CloneDVD2 anymore!!!
If I had only done 2 passes, I think it would have encoded in the 45 minute range... That's equivalent to the times I was getting with Recode2 (advanced analysis and slow recoding) on my laptop!!! I went with 3 passes because this was a 2 1/2 hour movie, PLUS I did "Full disc." Most projects will only require 2 passes, but I wanted to see what I could throw at this rig. Next up is a batch project of a 3 to 4 disc series of episodes...
EDIT: grammar!!!
Dropbox: http://db.tt/p5P9bH1d
System 1: Core2Quad Q6600 O/Ced @ 3.15 GHz, Gigabyte GA EP35 DS4 mobo, Zalman 9700, 4GB PC6400 RAM, Sapphire Radeon 2600HD Pro, Samsung 920BW 19" Widescreen LCD, Hauppauge! PVR-350.
System 2: Core2Duo E6400 O/Ced @ 3.2 GHz, Gigabyte GA 965P S3 mobo, Arctic Cooling Freezer 7 Pro, 2GB PC6400 RAM, PNY GeForce 6600, Hyundai B70A 17" LCD.This message has been edited since posting. Last time this message was edited on 15. November 2006 @ 05:11
|
|
