|
|
|
Problems with Plextor PX-755SA/Nero 7... or any application for that matter
|
|
|
typhoonrs
Newbie
|
5. November 2006 @ 08:08 |
Link to this message
|
Yesterday I installed new SerialATA plextor PX-755SA to replace older SATA PX-716SA burner. OS and Nero call it a PX-755A but PlexTools identifies it as correctly as SA.
Problem is that I've been unable to make a burn with this drive yet.
First I had a "Invalid block address" error, so I reinstalled, flashed to latest firmware, removed a Roxio driver (not sure how it got there in the first place), and explored the DMA issue I read about on this forum. As far as I can tell, the DMA does not apply to this system as it runs SATA2/3GB exclusively for a HDD RAID array and SATA/1.5GB for the optical drive(s). After all this, I tried again. Although still unsucessful, this time I got "Invalid field in command" error.
I've tried both burns and simulations, and receive the errors for both. DVDDecryptor couldn't burn either. Any Help/Feedback would be appreciated.
-Russ Scahill
PC: ICE-BOX
XP Pro SP2
Athlon64 FX57
4GB ECC RAM
2@SATAII WD250GB
was: PX716SA
now: PX755SA
______________
FIRST Nero LOG
¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 A
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 P
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PLEXTOR DVDR PX-755A> Version: 1.03 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : NVIDIA STRIPE 465.77G nvraid Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD2500KS-00MJB0 nvatabus Port 3 ID 0 DMA: Off
DiskPeripheral : WDC WD2500KS-00MJB0 nvatabus Port 3 ID 2 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-755A nvatabus Port 4 ID 2 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 5 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 5 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 5 ID 2 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 6 ID 0 DMA: Off
=== CDRom-Device-Map ===
NERO IMAGEDRIVE2 K: CDRom4
PLEXTOR DVDR PX-755A M: CDRom0
AXV CD/DVD-ROM N: CDRom1
AXV CD/DVD-ROM O: CDRom2
AXV CD/DVD-ROM P: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 20 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2006
Burn DVD Image
1:00:08 A #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
1:00:08 A #2 Text 0 File Reader.cpp, Line 124
Reader running
1:00:08 A #3 Text 0 File Writer.cpp, Line 113
Writer M: PLEXTOR DVDR PX-755A running
1:00:08 A #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
1:00:08 A #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2291168 (509:08.68, 4474MB)
1:00:08 A #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)
1:00:08 A #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PLEXTOR DVDR PX-755A, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
1:00:08 A #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:00:08 A #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2291169 (2291169) = #2291169/509:8.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2291169 blocks [M: PLEXTOR DVDR PX-755A]
--------------------------------------------------------------
1:00:08 A #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [M: PLEXTOR DVDR PX-755A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4692314112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2291169 | lead-out | 1 | 0x41 | 0x00
1:00:08 A #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:00:08 A #12 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 2x (2,770 KB/s)
1:00:08 A #13 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:00:08 A #14 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
1:00:08 A #15 Text 0 File MMC.cpp, Line 21541
Set BUFE: BURN-Proof -> ON
1:00:08 A #16 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
1:00:08 A #17 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:27:13 A #18 SPTI -1064 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 A0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02
Buffer x03d00000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2:27:13 A #19 CDR -1064 File Writer.cpp, Line 302
Invalid block address
M: PLEXTOR DVDR PX-755A
2:27:13 A #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:27:13 A #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:27:13 A #22 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 159
2:27:13 A #23 Phase 34 File dlgbrnst.cpp, Line 1724
Simulation failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/24/2006 12:46:22 P
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 A
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 7/24/2006 12:46:22 P (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 P (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
_______________
SECOND Nero LOG
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 10:03:20 A
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 P
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PLEXTOR DVDR PX-755A> Version: 1.05 - HA 1 TA 6 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 1 - 7.0.0.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : NVIDIA STRIPE 465.77G nvraid Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD2500KS-00MJB0 nvatabus Port 3 ID 0 DMA: Off
DiskPeripheral : WDC WD2500KS-00MJB0 nvatabus Port 3 ID 2 DMA: Off
CdRomPeripheral : PLEXTOR DVDR PX-755A nvatabus Port 4 ID 2 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 5 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 5 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 5 ID 2 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 6 ID 0 DMA: Off
=== CDRom-Device-Map ===
NERO IMAGEDRIVE2 K: CDRom4
PLEXTOR DVDR PX-755A M: CDRom6
AXV CD/DVD-ROM N: CDRom1
AXV CD/DVD-ROM O: CDRom2
AXV CD/DVD-ROM P: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 1
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 18 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.11.2006
Burn DVD Image
10:09:31 A #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
10:09:31 A #2 Text 0 File Reader.cpp, Line 124
Reader running
10:09:31 A #3 Text 0 File Writer.cpp, Line 113
Writer M: PLEXTOR DVDR PX-755A running
10:09:31 A #4 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
10:09:31 A #5 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2291168 (509:08.68, 4474MB)
10:09:31 A #6 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD DVD)
10:09:31 A #7 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PLEXTOR DVDR PX-755A, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
10:09:31 A #8 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:09:31 A #9 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2291169 (2291169) = #2291169/509:8.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2291169 blocks [M: PLEXTOR DVDR PX-755A]
--------------------------------------------------------------
10:09:31 A #10 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [M: PLEXTOR DVDR PX-755A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4692314112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2291169 | lead-out | 1 | 0x41 | 0x00
10:09:31 A #11 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:09:31 A #12 Phase 32 File dlgbrnst.cpp, Line 1724
Simulation started at 2x (2,770 KB/s)
10:09:31 A #13 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:09:31 A #14 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
10:09:31 A #15 Text 0 File MMC.cpp, Line 21541
Set BUFE: BURN-Proof -> ON
10:09:31 A #16 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
10:09:31 A #17 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:26:18 A #18 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom6: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 E0 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x03ce0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10:26:18 A #19 CDR -1066 File Writer.cpp, Line 302
Invalid field in command
M: PLEXTOR DVDR PX-755A
10:26:18 A #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:26:18 A #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:26:19 A #22 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was 223
10:26:19 A #23 Phase 34 File dlgbrnst.cpp, Line 1724
Simulation failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 A
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 7/24/2006 12:46:22 P (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 10:59:42 P (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Moderator
|
5. November 2006 @ 09:38 |
Link to this message
|
Hi typhoonrs
Biggest problem may be the discs you are using - Disc Manufacturer: PRINCO
Think these are even worse than CMC ;). So switch the media to some better stuff like Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell.
For the DMA - Nero doesn't report it correctly using your config. You should be able to check under your sata/raid controller in device manager.
Physical memory : 2047MB
Free physical memory: 2047MB
Memory in use : 20 %
Kinda odd here - free & physical are the same (?) probably not even an issue.
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2291168 (509:08.68, 4474MB)
For these discs lower the target size to 4360 or even 4300. You burn looks like it is failing at the end which is another sign of poor quality media.
For these dvd files already on your hard drive - you can use Recode to reduce the target size and burn.
Simulation failed at 2x
A little too slow here - these discs try 4x. Better media try 8x.
Nero Version: 7.0.0.0
Nero can use an update too - the latest is 7.5.7.0.
Give those a go and let us know.
|
|
typhoonrs
Newbie
|
5. November 2006 @ 15:11 |
Link to this message
|
Biggest problem may be the discs you are using - Disc Manufacturer: PRINCO
Think these are even worse than CMC ;). So switch the media to some better stuff like Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell.
I ran out of Verbatim w/ Azo Dye DVD-Rs earlier last week. I do have one DVD-R DL left that I'll try once I can at least burn a DVD-5. I know the PRINCOs can (ha! I mean do) have problems, especially burning an image this large, but at least they'll burn on the PX-716SA. On the PX755SA, I can't even get past the lead-in... even during simulation. During an actual burn, nothing happens, and the media is still recognized as blank when reloaded.
For the DMA - Nero doesn't report it correctly using your config. You should be able to check under your sata/raid controller in device manager.
The Device Mangler confirms SATA Transfer instead of PIO
Physical memory : 2047MB
Free physical memory: 2047MB
Memory in use : 20 %
Kinda odd here - free & physical are the same (?) probably not even an issue.
The system haas 4GB of RAM but even with the Physical Address Extension switch in WinXP, most applications can't see past the 2GB Limit. Occasionally I'll setup a 1GB RAM disk for swap files. But I have all that disabled now for troubleshooting.
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2291168 (509:08.68, 4474MB)
For these discs lower the target size to 4360 or even 4300. You burn looks like it is failing at the end which is another sign of poor quality media.
For these dvd files already on your hard drive - you can use Recode to reduce the target size and burn.
Simulation failed at 2x
A little too slow here - these discs try 4x. Better media try 8x.
Again the subpar media limits burning to 2x in any of the drives I've tried. And I do routinely use Recode or DVDShrink in a pinch. I've used it on 2 of my test images so far to get it to the 4474 mark (or less- 3.9GB on one of them) and they've both burned without any issues on the other Plextor PX-716SA, and on other network PCs.
Nero Version: 7.0.0.0
Nero can use an update too - the latest is 7.5.7.0.
I did just update to v7.5.7.0, but I'm still recieving the same error, and not making it past the Lead-in. I've tried swapping SATA calbes and testing the power. I'm wondering if this perticular drive may be defective.
-Russ
|
AfterDawn Addict
|
5. November 2006 @ 15:17 |
Link to this message
|
|
Moderator
|
5. November 2006 @ 16:40 |
Link to this message
|
Ah the memory thing - well that explains why it looks odd in Nero!
As you can see Nero doesn't report the correct transfer mode. So you're fine there.
I won't try the last dual layer disc either like you said. But I would try another brand like Verb 1st to see if this drive is defective. If it can't burn those than after everything you've checked - defective drive may just be it.
Give that a shot and keep us posted.
|
|
Rheingold
Newbie
|
4. December 2006 @ 01:27 |
Link to this message
|
I also have a Plextor 755SA dvdrw, and am completely stumped by my problem. It reads cds and dvds just fine, but will not burn any media. In fact, whenever I insert a blank media disc into the drive, the specification for the drive changes from DVD-RW Drive (D:) to CD Drive (D:). I have uninstalled and reinstalled the driver, updated the firmware, and tried several different forms of blank media from reputable companies, all to no avail. If there is anyone who has some sage advice on fixing this problem, you will have my undying gratitude and thanks!
|
Moderator
|
4. December 2006 @ 16:44 |
Link to this message
|
Hi Rheingold
Can you post a failed Nero log? We can take a peek.
Just need the last one. Be sure to edit out the serial # - they usually begin w/ 1A, 1C or 5C.
You can find them here:
Nero 6
program files>ahead>nero>nerohistory
Nero 7
program files>nero>nero 7>core>nerohistory.
|
|
Advertisement
|
|
|
|
speedbugy
Newbie
|
4. December 2006 @ 17:19 |
Link to this message
|
|
I put this in another post. I had similar problem. Talked to Plextor tech support. I did a blink test for them per the manual only to find out my recorder is bad at the end of the warranty. They have no repair reapir service and told be it would be cheaper to buy a new DVD recorder. It won't be a Plextor for sure.
|
|
