|
|
|
Another problem with DVD Shrink?
|
|
|
luketelst
Suspended due to non-functional email address
|
6. November 2006 @ 12:57 |
Link to this message
|
I use DVD Shrink for ripping and Nero 7.0 Ultra for burning. Shrink still seems to analyze and encode succesfully for me. But recently, when it states "Please insert an empty disk" -- and I put in a blank DVD-R -- it isn't being read. The little disk logo will sometimes appear on the screen once, twice, even three times, both nothing happens. (The screen continues to read: "Checking disks. . . . ")
Even DVDs I backed up successfully a month ago, can't be backed up now.
Is this a problem with the DVD I'm trying to back up? Shrink? Nero? or my six-month-old computer?
Any suggestions would be greatly appreciated. (I'm a total newbie at this!)
|
|
Advertisement
|
  |
|
|
Moderator
|
6. November 2006 @ 16:54 |
Link to this message
|
Hi luketelst
You may just need a firmware update for your burner.
Can also be the media you are using too.
Best bet - post the last Nero log. Just be sure to edit the serial # out. Usually begins w/ 1A, 1C or 5C and is at the top of each log.
The log will give us the info above and a bit more to see what's going on.
You can find it here: program files>nero>nero 7>core>nerohistory.
|
|
luketelst
Suspended due to non-functional email address
|
6. November 2006 @ 17:35 |
Link to this message
|
|
Thanks, Binkie, for replying so quickly.
You are dealing with a total newbie, so please tell me how I begin to look for:
program files>nero>nero 7>core>nerohistory
Sorry to be so lame! --Luke
|
Moderator
|
6. November 2006 @ 17:55 |
Link to this message
|
|
No worries there luketelst :)
On your desktop go to 'my computer' - double click. Then double click on the 'local disc{c:) (c is usually the hard drive).
Now follow the path above (they each are a folder).
Also just post the last log - the logs are usually separated by something like this:
=========***Nero Burning Rom History***=========
|
|
luketelst
Suspended due to non-functional email address
|
6. November 2006 @ 19:54 |
Link to this message
|
Thanks again for the quick reply, Binkie. I just tried again and was unsuccessful. (But, strangely, two hours previously I did do a successful burn.) Go figure. -- Luke
Here's the log (hope this is what you want:
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046620kB)
Free physical memory: 572MB (586300kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.11.2006
NeroAPI
11:32:16 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
11:32:16 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
11:32:16 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
11:32:16 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
11:32:16 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
11:32:16 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:32:16 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:32:16 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:32:16 PM #9 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
11:36:15 PM #10 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
11:36:15 PM #11 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVD+-RW GWA4164B
Medium not present
11:36:15 PM #12 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
11:36:15 PM #13 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
11:36:15 PM #14 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
|
Moderator
|
6. November 2006 @ 23:39 |
Link to this message
|
|
thread teleported to relevant forum
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
AfterDawn Addict
|
7. November 2006 @ 00:16 |
Link to this message
|
First of all, you didn't provided a full log, that's just partial only. Post the full log, but remember to "edit/delete" your Nero serial in prior to post back.
Quote:
11:36:15 PM #11 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVD+-RW GWA4164B
Medium not present
Go here http://forum.rpc1.org/dl_firmware.php?download_id=2279 to check for the latest firmware if you haven't done so. Firmware helps to increase the burning performance and media compatibility. It looks like you didn't have a media ready inside the burner.
Quote:
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
Again, it's asking for a media according to the above message; "Insert empty disc to write to."
**NOTE: this is a full log, just one, not all of the logs.
Here is a recent successfully burned log of mine, you can reference mine to yours and see if you'll notice any differences.
Quote:
====== *** Nero Burning ROM, History File *** ======
David X
Home
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX <<======== SERIAL EDITED
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS0B - HA 1 TA 2 - 7.5.7.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.5.7.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
LITE-ON DVDRW SHW-160P6S G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 452MB (463100kB)
Memory in use : 54
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.11.2006
UDF/ISO compilation
11:53:46 PM #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:53:46 PM #2 Phase 112 File dlgbrnst.cpp, Line 1746
DVD-Video files reallocation started
11:53:47 PM #3 Phase 114 File dlgbrnst.cpp, Line 1746
DVD-Video files reallocation completed (no file modified)
11:53:47 PM #4 Text 0 File Isodoc.cpp, Line 6508
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:53:47 PM #5 Phase 111 File dlgbrnst.cpp, Line 1746
DVD-Video files sorted
11:53:47 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
11:53:47 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
11:53:47 PM #8 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media
11:53:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283487 (507:26.37, 4459MB)
11:53:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO
11:53:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
11:53:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:53:47 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283488 (2283488) = #2283488/507:26.38
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283488 blocks [Main]
--------------------------------------------------------------
11:53:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676583424, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2283488 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2283488 | 0 | 0x00
2283488 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:53:47 PM #15 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:53:47 PM #16 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
11:53:47 PM #17 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
11:53:47 PM #18 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
11:53:47 PM #19 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 8x (11,080 KB/s)
11:53:47 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:53:48 PM #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:53:48 PM #22 Text 0 File DVDR.cpp, Line 6747
Drive: LITE-ON DVDRW SHW-160P6S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:53:48 PM #23 CDR -1207 File DVDR.cpp, Line 6143
Book Type automatically set to: DVD-ROM
11:53:48 PM #24 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
12:01:38 AM #25 Text 0 File WriterStatus.cpp, Line 112
<LITE-ON DVDRW SHW-160P6S> start writing Lead-Out at LBA 2283488 (22D7E0h), length 0 blocks
12:02:09 AM #26 Text 0 File DVDR.cpp, Line 6747
Drive: LITE-ON DVDRW SHW-160P6S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0
12:02:10 AM #27 Phase 37 File dlgbrnst.cpp, Line 1746
Burn process completed successfully at 8x (11,080 KB/s)
12:02:11 AM #28 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
12:02:11 AM #29 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 6/19/2006 10:05:45 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
luketelst
Suspended due to non-functional email address
|
7. November 2006 @ 05:47 |
Link to this message
|
I am a totally raw newbie. So, when I went to the firmware update site, I was immediately intimidated since it stated that it was for "advanced users only." (Sorry. . . that ain't me quite yet !!!)
I just tried burning a DVD and once again was unsuccessful -- it is simply not reading the new blank DVD when I put it in the drive.
Below is the complete log.
If the consensus is that I need a firmware update, then I kindly ask that someone please, please,walk me through the process.
Thanks much! --Luke
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM
NT-SPTI used
Nero API version: 7.0.1.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 3
Recorder: <HL-DT-ST DVD+-RW GWA4164B>Version: E113 - HA 1 TA 1 - 7.0.1.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : SONY CD-RW CRX217E atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160828AS iaStor Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY CD-RW CRX217E D: CDRom0
HL-DT-ST DVD+-RW GWA4164B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046620kB)
Free physical memory: 615MB (630600kB)
Memory in use : 39
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.11.2006
NeroAPI
9:14:04 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
9:14:04 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
9:14:04 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
9:14:04 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
9:14:04 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
9:14:04 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:14:04 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:14:04 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:14:04 AM #9 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media
9:16:27 AM #10 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO
9:16:27 AM #11 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVD+-RW GWA4164B
Medium not present
9:16:27 AM #12 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
9:16:27 AM #13 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:16:27 AM #14 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
Moderator
|
7. November 2006 @ 15:10 |
Link to this message
|
Looks like you have a Dell pc & this drive came w/ it so you have the latest firmware for it. Dell is the one who will support this drive.
Now what media are you using? Like Sony +R 16x.
Here's some more suggestions:
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: Off Need to turn DMA back on for the burner. May be playing into the problem. Here's a step by step guide to follow from alkohol:
http://forums.afterdawn.com/thread_view.cfm/260038
Nero API version: 7.0.1.3
Using interface version: 6.3.1.4
Nero can use an update and you still have part of Nero 6 left.
So uninstall Nero (write down serial # 1st) - run the clean tools for 6 & 7 then reinstall Nero. The latest version is 7.5.7.0.
Clean Tools:
http://ww2.nero.com/nero7/enu/Clean_Tools.html
Nero 7.5.7.0:
http://ww2.nero.com/nero7/enu/nero7-up.php
|
|
luketelst
Suspended due to non-functional email address
|
7. November 2006 @ 19:56 |
Link to this message
|
Thanks for the input, Binkie.
I called Dell today and they are going to send me a new drive and have a technician install it. That should occur Wed. or Thurs. I will wait to see if that works before updating Nero or doing any of the other suggestions.
I will keep you posted on that. I hope you will continue to give me your valuable insight into matters. It's greatly appreciated!
--Luke
|
AfterDawn Addict
|
7. November 2006 @ 23:13 |
Link to this message
|
@luke
Have you tried to uninstall your driver so your DMA can set it back to DMA Mode (Ultra DMA or 4 or 2)? Sounds like your drive has the latest firmware, so that shoulb be alright.
Below is where I have a question in mind:
Quote:
9:16:27 AM #11 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVD+-RW GWA4164B
Medium not present
9:16:27 AM #12 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
Did you inserted any blank media into your burner prior to the burning process? Plus your missing the "Last possible write address, Last address to be written and there's no showing what type of media you're using."
This message has been edited since posting. Last time this message was edited on 7. November 2006 @ 23:14
|
|
luketelst
Suspended due to non-functional email address
|
8. November 2006 @ 10:06 |
Link to this message
|
|
Thanks to all who have tried to help me. Luckily, it was "just" a bad DVD drive, which was replaced this morning. That seems to have done the trick (the new one is now reading my blank disks quite well!).
Thanks again to those who offered suggestions -- especially Binkie. Until the next time. --Luke
|
Moderator
|
8. November 2006 @ 13:26 |
Link to this message
|
You're welcome Luke :)
My that was fast for the drive replacement!! Glad it did the trick and can't bet the price too :)
Might also want to consider installing Nero - run the clean tools then install the latest version - bunch of fixes and enhancements from your version to the newest. Your choice though.
Happy Burning
|
|
fran331
Newbie
|
16. November 2006 @ 10:04 |
Link to this message
|
i use DVD Shrink and Nero but it won't let me encode the disc to the hard drive, but only on certain dvd's like Little Man , Click and The Break Up can u tell what I should try
Thanks
francis331
|
Moderator
|
16. November 2006 @ 14:23 |
Link to this message
|
|
Hi fran331
When you click backup in Shrink - hard disk folder should be an opinion under select backup target. Sometimes it's the last option. The movie shouldn't make a diff on if this option is available.
Or did I misunderstand your question?
|
|
fran331
Newbie
|
17. November 2006 @ 07:52 |
Link to this message
|
|
I Get the hard disk folder but, it ill not encode it starts then it stops and gives me will not encode. so I have no idea why it won't continue but only on certain movies
francis331
|
|
Advertisement
|
|
|
Moderator
|
17. November 2006 @ 14:27 |
Link to this message
|
Ok now I gotcha (misread your post)
The ones you are having trouble w/ have either Macrovision's Ripguard or Sony's ARccOS so shrink can't handle them alone.
So rip to the hard 1st with DVDFab decrypter (free) then open those files in Shrink.
http://www.dvdidle.com/free.htm
Or use RipIt4Me - all free programs too (use shrink,decrypter and fixvts)
http://forums.afterdawn.com/thread_view.cfm/360110
Or not free but has a 21 day free trial - AnyDVD. You just run in the background w/ Shrink. Very easy.
All the above programs will handle all the latest copy protections.
Give those a go and let us know.
|
|
