|
|
|
Nero 6 and memorex 8xn troubles
|
|
|
ty18769
Newbie
|
11. November 2006 @ 09:09 |
Link to this message
|
can anyone make heads or tails of why my burner won't burn anything? I have posted the log file below. My memorex true 8xn is firmware updated. Any help will be appreciated. log file below....It goes to 100% but can't seem to write the lead out or whatever. No DVD's, no CD's....nothing.... I can see that data is burned...but it fails at the end.....Before everyone points to the media being the culprit, I wanna let you know that I have burned these HP CDR's with this burner many times and had no problems. I seem to remember updating my chipset drivers and then this happened.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <Memorex DVD+/-RW True8Xn>Version: 1.G2 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Memorex DVD+/-RW True8Xn>Version: 1.G2 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVA0 nvata Port 0 ID 0 DMA: Off
CdRomPeripheral : Memorex DVD+/-RW True8Xn nvata Port 0 ID 2 DMA: Off
DiskPeripheral : WDC WD360GD-00FNA0 nvata Port 2 ID 0 DMA: Off
DiskPeripheral : ST3320620AS nvata Port 2 ID 2 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 3 ID 31 DMA: Off
=== CDRom-Device-Map ===
Memorex DVD+/-RW True8Xn E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1569MB (1607236kB)
Memory in use : 23
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.11.2006
CD-ROM (MP3)
12:56:24 PM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:56:24 PM #2 Text 0 File Burncd.cpp, Line 3012
Memorex DVD+/-RW True8Xn
Buffer underrun protection activated
12:56:24 PM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
12:56:24 PM #4 Text 0 File Reader.cpp, Line 124
Reader running
12:56:24 PM #5 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+/-RW True8Xn running
12:56:24 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:56:24 PM #7 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media
12:56:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 117305 ( 26:06.05)
12:56:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:56:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: Memorex DVD+/-RW True8Xn
12:56:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:56:24 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 117306 (117306) = #117306/26:4.6
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 117304 blocks [Memorex DVD+/-RW True8Xn]
--------------------------------------------------------------
12:56:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Memorex DVD+/-RW True8Xn] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 240549888, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
117306 | lead-out | 1 | 0x41 | 0x00
12:56:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 117306 -> 117304.
12:56:24 PM #15 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:56:24 PM #16 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:56:24 PM #17 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
12:56:24 PM #18 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
12:56:24 PM #19 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
12:56:24 PM #20 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 32x (4,800 KB/s)
12:56:24 PM #21 SPTI -1189 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1189)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 02
Buffer x02d66600: Len x4000
12:56:24 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:56:24 PM #23 Text 0 File Mmc.cpp, Line 21840
Set BUFE: Buffer underrun protection -> ON
12:57:53 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:57:55 PM #25 Text 0 File Mmc.cpp, Line 16608
<Memorex DVD+/-RW True8Xn> start Close Session
12:58:24 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 01 CA 3A 0A 00 00 00 00 0C
12:58:24 PM #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 1308
Write error
E: Memorex DVD+/-RW True8Xn
12:58:24 PM #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation
12:58:24 PM #29 Text 0 File Mmc.cpp, Line 16608
<Memorex DVD+/-RW True8Xn> start Close Session
12:58:55 PM #30 SPTI -1135 File SCSIPassThrough.cpp, Line 289
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 01 CA 3A 0A 00 00 00 00 0C
12:58:55 PM #31 CDR -1135 File ThreadedTransferInterface.cpp, Line 1308
Write error
E: Memorex DVD+/-RW True8Xn
12:58:55 PM #32 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation
12:58:55 PM #33 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 32x (4,800 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ty18769@hotmail.com
This message has been edited since posting. Last time this message was edited on 24. November 2006 @ 10:09
|
|
Advertisement
|
|
|
|
|
laddyboy
AfterDawn Addict
|
11. November 2006 @ 11:02 |
Link to this message
|
Hello.
Quote:
12:58:24 PM #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 1308
Write error
E: Memorex DVD+/-RW True8Xn
12:58:24 PM #28 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1308
Could not perform Fixation
This could be either media or hardware related.
I didn't see the media code as I did a quick scan. Have you used this CD media before successfully? You might try a different brand.
Your burning a multisession disk. Is that what you intended?
Nero 6.6.1.4 isn't a particularly good version imo. I'd uninstall it and then run the Nero 6 Clean Tool:
http://ww2.nero.com/nero6/enu/Nero_6_CleanTool.html
Then download and install version 6.6.0.18:
Package 1: http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
Nero isn't showing DMA (direct memory access) as being on for your IDE devices. I suspect that is because your IDE adapter may not be reporting correctly but I can't say for sure. You might try checking your adapter settings with the following guide link below. If you have an accelerator installed, you may not be able to check.
http://home.comcast.net/~bbmayo/checking%20DMA.pdf
Let us know what you do and how it works out.
|
|
ty18769
Newbie
|
12. November 2006 @ 09:14 |
Link to this message
|
I tried your suggestions and didn't come up with anything positive. My setup has SATA controllers and a parallel ata controller, both of which have DMA enabled, but I tried reinstalling them anyway prior to testing. It was my intention to add some songs to the cd later, hence the multi-session disc. I tried shutting off the multi-session to eliminate that as the culprit. I got the exact same result. I am posting the log on this specific error below, along with something that seemed strange to me. I took this screenshot to note that the buffer in the "action" section, when writing the lead in and lead out, never moves. After the initial buffer winds down to close out the cd, it never moves again:
Here is the log associated with the error:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <Memorex DVD+/-RW True8Xn>Version: 1.G2 - HA 0 TA 2 - 6.6.0.18
Adapter driver: <nvata> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Memorex DVD+/-RW True8Xn>Version: 1.G2 - HA 0 TA 2 - 6.6.0.18
Adapter driver: <nvata> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00GVA0 nvata Port 0 ID 0 DMA: Off
CdRomPeripheral : Memorex DVD+/-RW True8Xn nvata Port 0 ID 2 DMA: Off
DiskPeripheral : WDC WD360GD-00FNA0 nvata Port 2 ID 0 DMA: Off
DiskPeripheral : ST3320620AS nvata Port 2 ID 2 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 3 ID 31 DMA: Off
=== CDRom-Device-Map ===
Memorex DVD+/-RW True8Xn E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096624kB)
Free physical memory: 1601MB (1640256kB)
Memory in use : 21 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.11.2006
CD-ROM (MP3)
12:55:37 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:55:37 PM #2 Text 0 File Burncd.cpp, Line 2948
Memorex DVD+/-RW True8Xn
Buffer underrun protection activated
12:55:37 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
12:55:37 PM #4 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+/-RW True8Xn running
12:55:37 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:55:37 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
12:55:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 117307 ( 26:06.07)
12:55:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:55:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: Memorex DVD+/-RW True8Xn;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
12:55:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:55:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 117308 (117308) = #117308/26:4.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 117306 blocks [Memorex DVD+/-RW True8Xn]
--------------------------------------------------------------
12:55:37 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Memorex DVD+/-RW True8Xn] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 240553984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
117308 | lead-out | 1 | 0x41 | 0x00
12:55:37 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 117308 -> 117306.
12:55:37 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:55:37 PM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:55:37 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:55:37 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 24x (3,600 KB/s)
12:55:37 PM #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x03805200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
12:55:37 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:55:37 PM #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
12:57:06 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:57:07 PM #22 Text 0 File Mmc.cpp, Line 16452
<Memorex DVD+/-RW True8Xn> start Close Session
12:57:37 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x01 0xCA 0x3C 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:57:37 PM #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error
12:57:37 PM #25 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation
12:57:37 PM #26 Text 0 File Mmc.cpp, Line 16452
<Memorex DVD+/-RW True8Xn> start Close Session
12:58:09 PM #27 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 2, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x01 0xCA 0x3C 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:58:09 PM #28 CDR -1135 File ThreadedTransferInterface.cpp, Line 1294
Write error
12:58:09 PM #29 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1294
Could not perform Fixation
12:58:09 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 24x (3,600 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\nvata.sys': Ver=5.10.2600.0534 built by: WinDDK, size=92800 bytes, created 5/17/2005 4:45:08 PM (Adapter driver for rec)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0475 built by: WinDDK, size=86144 bytes, created 11/3/2004 2:58:20 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Ty18769@hotmail.com
|
|
laddyboy
AfterDawn Addict
|
12. November 2006 @ 11:40 |
Link to this message
|
|
Whether it's a media problem or a hardware communication problem, I don't know. The only thing I can suggest is to try a different brand of media. You're using media from a low quality supplier right now. To the best of my knowledge there aren't any additional firmware updates for this particular burner. Can you burn DVDs?
|
|
ty18769
Newbie
|
21. November 2006 @ 08:20 |
Link to this message
|
|
I switched to a memorex brand of cd, but I am getting the exact same result. I won't bother posting the log file, unless someone thinks I should. Let me know if anyone can see what the problem is.
Tyrus
Ty18769@hotmail.com
|
AfterDawn Addict
|
21. November 2006 @ 11:37 |
Link to this message
|
|
|
ty18769
Newbie
|
22. November 2006 @ 12:05 |
Link to this message
|
My section looks like this:
ata controllers
and my Nero infotool looks like this:
infotool
My burner is set to this:
burner settings
And has these possible settings:
possible
Any ideas on what should make it work? Kinda sick of making coasters :( All of my HD's are running SATA 150 and my old burner is a PATA 33. everything looks like the DMA is turned on. I'm not sure what to change.
Ty18769@hotmail.com
This message has been edited since posting. Last time this message was edited on 22. November 2006 @ 13:03
|
AfterDawn Addict
|
22. November 2006 @ 12:48 |
Link to this message
|
|
@ty18769, In order for your "pics" to appear you need to close the bracket prior to the URL [ ]
|
|
ty18769
Newbie
|
22. November 2006 @ 13:04 |
Link to this message
|
|
got the links fixed, thanks :)
Ty18769@hotmail.com
This message has been edited since posting. Last time this message was edited on 22. November 2006 @ 13:04
|
|
laddyboy
AfterDawn Addict
|
22. November 2006 @ 14:53 |
Link to this message
|
Have you tried using WinXP or any other app other than Nero to burn a CD?
Have you tried burning a DVD?
You might also try a hard reset by opening your system and unplugging both the data and power cables from the burner. Then restart the system a couple of times and then recable.
As I mentioned before, fixation errors can be due to a burner failure or media, with media being the most common cause. You don't seem to run into problems until the end when the TOC is being updated so it seems more likely to be media related but it could be a problem with the laser repositioning and getting the media back up to speed.
Try to find another system and install your burner there for testing. If it doesn't work in another system, the burner is likely bad. If it does work, we'll search for problems on your system causing the fault.
|
|
ty18769
Newbie
|
24. November 2006 @ 07:41 |
Link to this message
|
|
I tried burning a regular music cd with windows media player 10 and had the same result. It would burn the entire cd and get to the end and fail. If everyone thinks it's the DMA, then I would like some suggestions on different settings that I might try. I think it all happened when I updated my chipset drivers, which would make sense, but I have tried uninstalling it and having it rerecognize it, to no avail. Any help is appreciated.
Ty18769@hotmail.com
This message has been edited since posting. Last time this message was edited on 24. November 2006 @ 09:53
|
|
ty18769
Newbie
|
24. November 2006 @ 09:30 |
Link to this message
|
|
I tried burning a dvd and it does the exact same thing. In case anyone was wondering.
Ty18769@hotmail.com
|
|
Advertisement
|
|
|
|
ty18769
Newbie
|
29. November 2006 @ 14:34 |
Link to this message
|
|
FIXED
I got a positive result by changing my Nvidia Nforce 4 Parallel ATA Controller DMA settings. It was previously set to Ultra DMA 2 - Ultra33. I instead set it to Multi-word DMA 2. This fixed the problem immediately. Thanks for the suggestions and all the help. I would have been stuck if someone didn't mention the DMA settings.
Ty18769@hotmail.com
|
|
