|
|
|
New Plextor won't burn DVDs
|
|
|
Xenophile
Newbie
|
17. November 2006 @ 08:16 |
Link to this message
|
I've searched for a couple of hours now, and haven't found a solution. I've updated Nero 6 and the firmware for my brand new Plextor PX-760A. I had a couple of successful burns with DVD+R and one successful burn with DVD+R DL, but after updating the drives firmware I've had nothing but problems. Had problems with DMA being mysteriously disabled, but I've enabled it. Now I can burn CDs OK, but DVDs always fail, usually with nothing having been written to the disk. Here's a copy of the latest log. Please help!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR DVDR PX-760A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120026AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3120026AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W124TS1.05 aic78xx Port 3 ID 4 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom1
PLEXTOR CD-R PX-W124TS G: CDRom0
NERO IMAGEDRIVE2 J: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1534MB (1571836kB)
Free physical memory: 960MB (983888kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.11.2006
ISO compilation
5:52:14 AM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:52:14 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
5:52:14 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
5:52:14 AM #4 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-760A running
5:52:14 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:52:19 AM #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
5:52:20 AM #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4135423 (918:58.73, 8076MB)
5:52:20 AM #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
5:52:20 AM #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
5:52:20 AM #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:52:20 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4135424 (4135424) = #4135424/918:58.74
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4135424 blocks [PLEXTOR DVDR PX-760A]
--------------------------------------------------------------
5:52:20 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8469348352, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4135424 | lead-out | 1 | 0x41 | 0x00
5:52:20 AM #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:52:20 AM #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:52:20 AM #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
5:52:20 AM #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
5:52:20 AM #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
5:52:20 AM #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 6x (8,310 KB/s)
5:52:20 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:52:20 AM #20 Text 0 File DVDPlusDualLayer.cpp, Line 466
Disc finalized, LBA total Image size: 4135424 (8077MB), Last LBA L0: 2067727 (4038MB)
5:52:20 AM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x04690600: Len x804
5:52:20 AM #22 Text 0 File DVDPlusDualLayer.cpp, Line 631
L0 Data Zone Capacity set to 2067728 (1F8D10h, 4038MB) -> OK, confirmed setting
5:52:20 AM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 658
Burning Layer 1
5:52:20 AM #24 Text 0 File DVDPlusDualLayer.cpp, Line 668
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
5:52:20 AM #25 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 228D0F h (LBN: 1F8D0F h, 4038 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: MKM.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@
25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#....
02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#.........
5:52:20 AM #26 Text 0 File DVDR.cpp, Line 5816
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
5:52:20 AM #27 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: DVD-ROM
5:52:20 AM #28 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
5:52:22 AM #29 Text 0 File Cdrdrv.cpp, Line 1200
05:52:22.015 - E: PLEXTOR DVDR PX-760A : Queue again later
5:53:52 AM #30 SPTI -1106 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x04f00000: Len x10000
0x22 00 20 00 00 00 00 00 00 20 00 08 00 00 00 00
0x08 00 68 09 12 0A 14 2C E0 02 00 00 01 00 00 01
0x01 00 22 00 1E 00 00 00 00 00 00 1E 00 08 00 00
5:53:52 AM #31 CDR -1106 File Writer.cpp, Line 311
Power calibration error
E: PLEXTOR DVDR PX-760A
5:53:52 AM #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:53:52 AM #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:53:53 AM #34 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
5:53:53 AM #35 SPTI -1066 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
5:53:53 AM #36 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders
5:53:53 AM #37 Phase 129 File dlgbrnst.cpp, Line 1685
Generating DVD borders completed successfully
5:53:53 AM #38 Text 0 File DVDR.cpp, Line 5816
Drive: PLEXTOR DVDR PX-760A
Book Type request [PX]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
5:53:53 AM #39 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/7/2004 3:01:14 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 11, 1, size=99456 bytes, created 1/3/2005 11:33:44 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 11, 1, size=28928 bytes, created 1/3/2005 11:33:24 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 11, 1, size=8704 bytes, created 1/3/2005 11:33:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 9:59:41 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
17. November 2006 @ 08:39 |
Link to this message
|
|
|
Xenophile
Newbie
|
17. November 2006 @ 11:08 |
Link to this message
|
|
Thanks for the reply Ripper. I'll try your suggestions this evening.
|
|
Bigfatboy
Member
|
17. November 2006 @ 11:26 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 17. November 2006 @ 11:27
|
AfterDawn Addict
|
17. November 2006 @ 11:29 |
Link to this message
|
|
|
Xenophile
Newbie
|
17. November 2006 @ 11:50 |
Link to this message
|
More good info. thanks. I had wondered about that "?.?.?.?" bit in the log, but had read somewhere that XP doesn't need this dll. I'm very curious about why there would be an identically-named (but presumably different) dll in the Nero directory. Wouldn't that be considered a bad programming practice?
|
AfterDawn Addict
|
18. November 2006 @ 04:00 |
Link to this message
|
I don't know why Nero uses its own too. But anyway, it's your windows aspi that is wrong not Nero.
|
|
Xenophile
Newbie
|
19. November 2006 @ 04:48 |
Link to this message
|
Still no love.
Ripper, the links to the update files in your post take me to Nero's update page index, not to a specific file download. I can't find the files you refer to:
Package 1
http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
Package 2
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
I did run the clean utility, then I tried to run the latest Nero 6 updater (Nero-6.6.1.4_no_yt.exe) but that wouldn't start until I re-installed Nero from my original CD. I didn't re-install InCD.
I updated the Windows ASPI layer with the utility from Adaptec.
I still can't burn any DVD... single or double layer. I can burn CDs OK. I'm starting to think my drive broken. Here's the latest log... trying to burn a single-layer DVD.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 5/6/2002 11:01:14 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.05 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 2 - 6.6.1.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR DVDR PX-760A atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST3120026AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3120026AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W124TS1.05 aic78xx Port 3 ID 4 DMA: Off
CdRomPeripheral : Nero IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-760A E: CDRom1
PLEXTOR CD-R PX-W124TS G: CDRom0
NERO IMAGEDRIVE2 J: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1534MB (1571836kB)
Free physical memory: 713MB (730396kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.11.2006
ISO compilation
6:19:32 AM #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:19:32 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
6:19:32 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
6:19:32 AM #4 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-760A running
6:19:32 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:19:32 AM #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
6:19:32 AM #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2254527 (501:00.27, 4403MB)
6:19:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:19:32 AM #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
6:19:32 AM #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:19:32 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2254528 (2254528) = #2254528/501:0.28
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2254528 blocks [PLEXTOR DVDR PX-760A]
--------------------------------------------------------------
6:19:32 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4617273344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2254528 | lead-out | 1 | 0x41 | 0x00
6:19:32 AM #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:19:32 AM #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:19:32 AM #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
6:19:32 AM #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
6:19:32 AM #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
6:19:32 AM #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
6:19:32 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:19:32 AM #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
6:19:32 AM #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
6:19:32 AM #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:29:37 AM #23 SPTI -600 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x03630000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
6:29:37 AM #24 CDR -600 File Writer.cpp, Line 311
Device not available
E: PLEXTOR DVDR PX-760A
6:29:37 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:29:37 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:29:37 AM #27 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1
6:29:37 AM #28 SPTI -1114 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x02fd4c00: Len x20
6:29:37 AM #29 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
E: PLEXTOR DVDR PX-760A
6:29:37 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
6:29:37 AM #31 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 5/6/2002 11:01:08 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 9:59:41 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
It looks like this is the first obvious error:
Quote:
6:29:37 AM #23 SPTI -600 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x03630000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Any idea what it means?
|
AfterDawn Addict
|
19. November 2006 @ 07:17 |
Link to this message
|
I can see a few things wrong still...
Quote:
CdRomPeripheral : PLEXTOR DVDR PX-760A atapi Port 0 ID 0 DMA: Off
Your DMA has slipped off. Put it back on with this guide...
http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues
Now, the error you pointed out (well done BTW), is related to this.
Quote:
Disc Manufacturer: CMC MA - G. AM3
That media, CMC MAG, is horrible, some of the worst available. Try brands like Verbatim or Sony.
Also your burning @ 16x. Burn @ 8x for now.
Get back to me. :-)
This message has been edited since posting. Last time this message was edited on 19. November 2006 @ 07:17
|
|
Xenophile
Newbie
|
19. November 2006 @ 13:31 |
Link to this message
|
I noticed the DMA thing right after I posted this. This is the 3rd time I've had to re-enable it. In order to do that I had to delete the DVD-R drive in Device Mangler and then let Windows re-detect it. So now I've successfully burned a single-layer DVD again (the cheap TDK media seems to work OK). Then I tried a dual-layer data disk. The burn seemed to go OK, and Nero reported that it was burned successfully. But I can't read the disk. Windows reports that it is not formatted correctly or is corrupt. Plextools doesn't even seem to see it. Aargh.
|
AfterDawn Addict
|
20. November 2006 @ 06:17 |
Link to this message
|
|
Try using IMGBurn to burn your DLs with. Make an ISO of the files first, then burn it with IMGBurn.
|
|
Xenophile
Newbie
|
5. December 2006 @ 13:23 |
Link to this message
|
|
Just to confirm that it was a problem with the drive itself. I returned it to Plextor for a replacement, and I'm having no problems with the new drive.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
6. December 2006 @ 05:35 |
Link to this message
|
|
Ah right cool. Glad you got it fixed. Happy Burning!
|
|
