|
|
|
Illegal Disc Error
|
|
|
Shaolyn
Newbie
|
17. November 2006 @ 20:09 |
Link to this message
|
Hi, sorry, but i tried to look and i found the burner same type as mine, but i do not know how to read if the firmware or if anything else is wrong.. here is the Log; i use a LITE-ON DVDRW SOHW-1633S, and Nero 6.6.0.8..
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0A - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JD-55HBC0 08.0 viamraid Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S H: CDRom0
HL-DT-ST DVD-ROM GDR8162 I: CDRom1
Generic DVD-ROM J: CDRom2
Generic DVD-ROM K: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1046960kB)
Free physical memory: 360MB (368980kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.11.2006
DVD-Copy on the fly
12:52:04 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
12:52:04 AM #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running
12:52:04 AM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 1971392 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
12:52:04 AM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1971392 = 1971392, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
12:52:04 AM #5 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media
12:52:04 AM #6 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1971391 (438:05.16, 3850MB)
12:52:04 AM #7 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
12:52:04 AM #8 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
12:52:04 AM #9 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:52:04 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1971392 (1971392) = #1971392/438:5.17
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1971392 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
12:52:04 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4037410816, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1971392 | lead-out | 1 | 0x41 | 0x00
12:52:04 AM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:52:04 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:52:04 AM #14 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode
12:52:04 AM #15 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
12:52:04 AM #16 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes
12:52:04 AM #17 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:52:33 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
12:52:33 AM #19 CDR -1046 File Writer.cpp, Line 311
Illegal disc
12:52:33 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:52:33 AM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:52:34 AM #22 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1
12:52:34 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 8:07:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
please tell me what to do :(
Shaolyn
|
|
Advertisement
|
 |
|
|
Moderator
|
17. November 2006 @ 20:25 |
Link to this message
|
|
|
Shaolyn
Newbie
|
17. November 2006 @ 20:45 |
Link to this message
|
im not too sure how to use the Firmware Page.. lol.. my burner is BS0A, but there is no link to BS0A, do any of those work? or do i just press LtnRPC.. also, i found a site that may have the BS0A.. is this site legit?: http://codeguys.rpc1.org/firmwares.html
This message has been edited since posting. Last time this message was edited on 17. November 2006 @ 20:55
|
AfterDawn Addict
|
17. November 2006 @ 21:24 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 17. November 2006 @ 21:25
|
|
Shaolyn
Newbie
|
18. November 2006 @ 05:10 |
Link to this message
|
|
Ohh okay, i thought Bs0A was the one i gotta look for, i didnt know it was just the original version.. i got it updated, and it works! thanks everyone
Shaolyn
This message has been edited since posting. Last time this message was edited on 18. November 2006 @ 09:32
|
|
Advertisement
|
|
|
Moderator
|
18. November 2006 @ 14:37 |
Link to this message
|
|
You're welcome Shaolyn :)
Glad the firmware update did the trick.
Happy Burning!
|
|
