|
|
|
Help_Nero 7_ASUS 1608P3S_Queue Again Later_ Reset Occured
|
|
|
raido
Newbie
|
20. November 2006 @ 14:06 |
Link to this message
|
shows lots of "queue again later"
and then ends with "reset occured"
burning DATA CD's or DVD's works perfectly fine.
when disc to disc copying occurs this error pops up.
happens on both cd and dvd copying, and regardless of whether
the cd is close to full or only 2/3 full.
I've tried setting the DMA for the device. all is on "use dma if available"
but the slave of 1 of the bus is just not using ultra buffer. all others are
(at least in the device manager properties.) somehow nero's log still shows DMA off.
thought it was a firmware thing, so i updated to newest firmware,
but still same thing. changing drive speeds doesn't affect it.
updating drivers for motherboard, and graphics card didn't help either.
tried changing media, doesn't help.
Drive was only purchased for few months.
sent back to supplier but they say they test it to be okay.
so tried it on friends computer.
It works fine on friend's
system with exact same media and also Nero 7.
motherboard is Gigabyte GA_8I915P
Sound card is Creative Audigy 4
Graphics card is NVidia GEforce 6600
DVD-Rom = AOpen DVD ROM
DVD-Writer = ASUS 1608P3S
writer and rom is connected on a different connection
Below is the log
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 2002/5/6 上午 05:01:14
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/11/2 下午 01:54:32
NT-SPTI used
Nero Version: 7.2.3.2
Internal Version: 7, 2, 3, 2
(Nero Express)
Recorder: <ASUS DRW-1608P3S> Version: 1.19 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <AOPEN DVD1648/LKY >Version: DSA4 - HA 1 TA 1 - 7.2.3.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JD-22HBB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : AOPEN DVD1648/LKY atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y060L0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : ASUS DRW-1608P3S 1.19 viamraid Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
AOPEN DVD1648/LKY E: CDRom1
ASUS DRW-1608P3S G: CDRom0
AXV CD/DVD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 613MB (627836kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2006
===== Disc-Copy over image - 1st step : Copy to image ...
下午 04:38:43 #1 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
下午 04:38:43 #2 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
下午 04:38:43 #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory
下午 04:38:43 #4 Text 0 File Reader.cpp, Line 124
Reader running
下午 04:38:43 #5 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running
下午 04:38:43 #6 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD+RW
S01 T01 Con 0x04 Start 0 Len 2289456 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
下午 04:38:43 #7 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2289456 = 2289456, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
下午 04:38:43 #8 Text 0 File Burncd.cpp, Line 3400
Turn on UltraRaw 96-Mode, using DVD media
下午 04:38:44 #9 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 2289455 (508:46.05, 4471MB)
下午 04:38:44 #10 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
下午 04:38:44 #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
下午 04:38:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - 資料(模式1))
2 indices, index0 (150) not provided
original disc pos #0 + 2289456 (2289456) = #2289456/508:46.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289456 blocks [Image Recorder]
--------------------------------------------------------------
下午 04:38:44 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688805888, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2289456 | lead-out | 1 | 0x41 | 0x00
下午 04:38:44 #14 Phase 120 File dlgbrnst.cpp, Line 1730
Creating the image for burning
下午 04:38:44 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
下午 04:47:56 #16 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 2289456 (22EF30h), length 0 blocks
下午 04:47:56 #17 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
下午 04:47:56 #18 Phase 121 File dlgbrnst.cpp, Line 1730
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
下午 04:48:01 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
下午 04:48:01 #2 Text 0 File Reader.cpp, Line 124
Reader running
下午 04:48:01 #3 Text 0 File Writer.cpp, Line 113
Writer G: ASUS DRW-1608P3S running
下午 04:48:01 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4688805888
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Henry\My Documents\TempImage.nrg>
下午 04:48:01 #5 Text 0 File Burncd.cpp, Line 3400
Turn on UltraRaw 96-Mode, using DVD media
下午 04:48:01 #6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2289455 (508:46.05, 4471MB)
下午 04:48:01 #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
下午 04:48:01 #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: ASUS DRW-1608P3S, Media type: DVD-R
Disc Manufacturer: TDKG01 - 0000d9
Disc Application Code: 64, Disc Physical Code: 193
下午 04:48:01 #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
下午 04:48:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2289456 (2289456) = #2289456/508:46.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289456 blocks [G: ASUS DRW-1608P3S]
--------------------------------------------------------------
下午 04:48:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [G: ASUS DRW-1608P3S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688805888, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2289456 | lead-out | 1 | 0x41 | 0x00
下午 04:48:01 #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
下午 04:48:01 #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
下午 04:48:01 #14 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 1x (1,385 KB/s)
下午 04:48:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
下午 04:48:01 #16 Text 0 File DVDR.cpp, Line 2869
Recording mode: Sequential Recording Mode for Multisession
下午 04:48:01 #17 Text 0 File DVDR.cpp, Line 3025
Start write address at LBA 0
DVD high compatibility mode: No
下午 04:48:01 #18 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
下午 04:48:03 #19 Text 0 File Cdrdrv.cpp, Line 1224
16:48:03.953 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:19 #20 Text 0 File Cdrdrv.cpp, Line 1224
16:48:19.281 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:19 #21 Text 0 File Cdrdrv.cpp, Line 1224
16:48:19.937 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:19 #22 Text 0 File Cdrdrv.cpp, Line 1224
16:48:19.968 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:20 #23 Text 0 File Cdrdrv.cpp, Line 1224
16:48:20.265 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:20 #24 Text 0 File Cdrdrv.cpp, Line 1224
16:48:20.296 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:20 #25 Text 0 File Cdrdrv.cpp, Line 1224
16:48:20.359 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:22 #26 Text 0 File Cdrdrv.cpp, Line 1224
16:48:22.250 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:22 #27 Text 0 File Cdrdrv.cpp, Line 1224
16:48:22.453 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:50 #28 Text 0 File Cdrdrv.cpp, Line 1224
16:48:50.578 - G: ASUS DRW-1608P3S : Queue again later
下午 04:48:50 #29 Text 0 File Cdrdrv.cpp, Line 1224
16:48:50.828 - G: ASUS DRW-1608P3S : Queue again later
下午 04:53:41 #30 Text 0 File Cdrdrv.cpp, Line 1224
16:53:41.000 - G: ASUS DRW-1608P3S : Queue again later
下午 04:53:41 #31 Text 0 File Cdrdrv.cpp, Line 1224
16:53:41.218 - G: ASUS DRW-1608P3S : Queue again later
下午 04:53:50 #32 Text 0 File Cdrdrv.cpp, Line 1224
16:53:50.500 - G: ASUS DRW-1608P3S : Queue again later
下午 04:53:50 #33 Text 0 File Cdrdrv.cpp, Line 1224
16:53:50.656 - G: ASUS DRW-1608P3S : Queue again later
下午 04:58:40 #34 Text 0 File Cdrdrv.cpp, Line 1224
16:58:40.859 - G: ASUS DRW-1608P3S : Queue again later
下午 04:58:41 #35 Text 0 File Cdrdrv.cpp, Line 1224
16:58:41.046 - G: ASUS DRW-1608P3S : Queue again later
下午 04:58:41 #36 Text 0 File Cdrdrv.cpp, Line 1224
16:58:41.640 - G: ASUS DRW-1608P3S : Queue again later
下午 05:03:31 #37 Text 0 File Cdrdrv.cpp, Line 1224
17:03:31.234 - G: ASUS DRW-1608P3S : Queue again later
下午 05:03:31 #38 Text 0 File Cdrdrv.cpp, Line 1224
17:03:31.421 - G: ASUS DRW-1608P3S : Queue again later
下午 05:08:21 #39 Text 0 File Cdrdrv.cpp, Line 1224
17:08:21.562 - G: ASUS DRW-1608P3S : Queue again later
下午 05:08:21 #40 Text 0 File Cdrdrv.cpp, Line 1224
17:08:21.796 - G: ASUS DRW-1608P3S : Queue again later
下午 05:08:22 #41 Text 0 File Cdrdrv.cpp, Line 1224
17:08:22.859 - G: ASUS DRW-1608P3S : Queue again later
下午 05:08:23 #42 Text 0 File Cdrdrv.cpp, Line 1224
17:08:23.093 - G: ASUS DRW-1608P3S : Queue again later
下午 05:13:13 #43 Text 0 File Cdrdrv.cpp, Line 1224
17:13:13.281 - G: ASUS DRW-1608P3S : Queue again later
下午 05:13:13 #44 Text 0 File Cdrdrv.cpp, Line 1224
17:13:13.687 - G: ASUS DRW-1608P3S : Queue again later
下午 05:13:14 #45 Text 0 File Cdrdrv.cpp, Line 1224
17:13:14.718 - G: ASUS DRW-1608P3S : Queue again later
下午 05:13:15 #46 Text 0 File Cdrdrv.cpp, Line 1224
17:13:15.046 - G: ASUS DRW-1608P3S : Queue again later
下午 05:13:16 #47 Text 0 File Cdrdrv.cpp, Line 1224
17:13:16.078 - G: ASUS DRW-1608P3S : Queue again later
下午 05:13:16 #48 Text 0 File Cdrdrv.cpp, Line 1224
17:13:16.390 - G: ASUS DRW-1608P3S : Queue again later
下午 05:18:06 #49 Text 0 File Cdrdrv.cpp, Line 1224
17:18:06.640 - G: ASUS DRW-1608P3S : Queue again later
下午 05:18:07 #50 Text 0 File Cdrdrv.cpp, Line 1224
17:18:07.046 - G: ASUS DRW-1608P3S : Queue again later
下午 05:18:08 #51 Text 0 File Cdrdrv.cpp, Line 1224
17:18:08.140 - G: ASUS DRW-1608P3S : Queue again later
下午 05:18:08 #52 Text 0 File Cdrdrv.cpp, Line 1224
17:18:08.453 - G: ASUS DRW-1608P3S : Queue again later
下午 05:18:09 #53 Text 0 File Cdrdrv.cpp, Line 1224
17:18:09.546 - G: ASUS DRW-1608P3S : Queue again later
下午 05:18:09 #54 Text 0 File Cdrdrv.cpp, Line 1224
17:18:09.859 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:47 #55 Text 0 File Cdrdrv.cpp, Line 1224
17:19:47.062 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:47 #56 Text 0 File Cdrdrv.cpp, Line 1224
17:19:47.484 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:47 #57 Text 0 File Cdrdrv.cpp, Line 1224
17:19:47.984 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #58 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.031 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #59 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.093 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #60 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.140 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #61 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.187 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #62 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.234 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #63 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.265 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #64 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.312 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #65 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.375 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #66 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.421 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #67 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.468 - G: ASUS DRW-1608P3S : Queue again later
下午 05:19:48 #68 Text 0 File Cdrdrv.cpp, Line 1224
17:19:48.515 - G: ASUS DRW-1608P3S : Queue again later
下午 05:21:24 #69 Text 0 File Cdrdrv.cpp, Line 1224
17:21:24.531 - G: ASUS DRW-1608P3S : Queue again later
下午 05:21:24 #70 SPTI -500 File SCSIPassThrough.cpp, Line 291
G: CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 14 65 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04830000: Len x10000
0x00 00 01 BA 45 41 D6 87 96 3B 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 09 21 50 75 AB 2F FF FF FF FF
0x89 02 00 01 7F FE 80 01 FC 3C 3E D2 75 E0 0D 3A
下午 05:21:28 #71 SPTI -1114 File SCSIPassThrough.cpp, Line 291
G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 14 65 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0E 00 00 00 00 29
Buffer x057a2000: Len x10000
0x00 00 01 BA 45 41 D6 87 96 3B 01 89 C3 F8 00 00
0x01 BD 07 EC 81 80 09 21 50 75 AB 2F FF FF FF FF
0x89 02 00 01 7F FE 80 01 FC 3C 3E D2 75 E0 0D 3A
下午 05:21:28 #72 CDR -1114 File Writer.cpp, Line 302
Reset occurred
G: ASUS DRW-1608P3S
下午 05:21:28 #73 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
下午 05:21:29 #74 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
下午 05:21:29 #75 Text 0 File DVDR.cpp, Line 3265
EndDAO: Last written address was 1336607
下午 05:21:33 #76 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out
下午 05:47:32 #77 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
下午 05:47:32 #78 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 2002/5/6 上午 05:01:08
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
20. November 2006 @ 19:08 |
Link to this message
|
So that I could comment on7.2.3.2/ 7.2.3.2b, I tried it to burn 3 AVI flies which I had successfully burned using version 7.0.8.2, sadly each burn was unsatisfactory so I reverted to 7.0.8.2, tried them again with success?my conclusion..7.2.3.2b was a failure when it comes to burn AVI files.
I did the following, uninstalled7.2.3.2/ 7.2.3.2b, ran this clean tool
http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then installed 7.0.8.2 from here
http://www.filehippo.com/download_nero_7_premium/?845
Alater version is 7.5.7.0 from here
http://www.filehippo.com/download_nero_7_premium/
Quote:
CdRomPeripheral : ASUS DRW-1608P3S 1.19 viamraid Port 2 ID 0 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off
DMA needs to be on, heres a guide to turn on
http://forums.afterdawn.com/thread_view.cfm/260038
Quote:
Disc Manufacturer: TDKG01 - 0000d9
I dont recommend TDK media, try Verbatim or Sony (made in japan)
Heres a bit on your Reset Occurred error
Quote:
Solution:
If you do a search on SCSI Command Errors, you will find that many others have had the same issue as yours with USB Recorders, regardless of the software used. Meaning, it occurs with Nero, CD Creator, RecordNow, etc.
And the error message varies from SCSI Command Error, Bus Rest, etc...
In most cases, users have found that updating the drivers for the USB Controller resolves the issue. Other found a new External Chassis for the Recorder resolved the issue. And we provided a work around in our MMC.DLL file that causes our software to reissue the command till the recorder is free and accpets, instead of timing out so soon after a lack of response from the device. This resolved the issue for some, but not for others. This MMC.DLL file is part of Nero 6.6.0.3 and above builds.
Try to disconnected all USB devices except for the external DVD burner.
As a last resort, after trying the above solutions and others, they finally connect as an internal to the system and all issues are resolved.
This message has been edited since posting. Last time this message was edited on 20. November 2006 @ 19:09
|
|
raido
Newbie
|
21. November 2006 @ 10:15 |
Link to this message
|
Hi, thanks for reply,
DMA on problem on another forum said it had something to do with the via chipset of the motherboard. something abuot the way that Nero checks dma doesn't really work.
but my dma is on when i check from device manager.
Media wise, i've already lost 10 verbatim dvd's
and 20 sony cd's.
all same error, no luck.
and reset occured part that you quoted,
my dvd writer is internal not external.
i'll try updating Nero.
thanks for reply.
|
|
raido
Newbie
|
25. November 2006 @ 13:43 |
Link to this message
|
Tried updating to newest Nero,
doesn't help.
suspecting to either be ide driver,
or aspi problem
btw, creating a image, then loading the image with Daemon Tools,
then doing a cd-cd or dvd-dvd copy works perfectly fine.
something about reading from a drive and burning to another that's giving it a problem
|
|
Advertisement
|
|
|
|
raido
Newbie
|
25. November 2006 @ 14:10 |
Link to this message
|
|
HI, i got a tip from CD-Freaksthat it might have something to do with the RAID of the m-board, now i've got it fixed.
here's what happened.
I tried diabling the RAID in the BIOS, then realized it couldn't find my writer anymore. then remembered my machine only recognised some of the HDD and rom drives connected to some ide buses after i installed the motherboard driver. so i checked my motherboard, and saw that the 3 ide buses, 1 of them were red, other's green. so i reversed the connection, put the writer and rom drive on the channel that could be detected (the red one) regardless of the driver(the RAID stuff i think) and connected the HDD on the other ide. now things burn just fine.
|
|
