User User name Password  
   
Sunday 3.8.2025 / 08:42
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > pc hardware > dvd / blu-ray drives > is my hp burner dead?
Show topics
 
Forums
Forums
Is my hp burner dead?
  Jump to:
 
Posted Message
kloge
Newbie
_
29. November 2006 @ 02:54 _ Link to this message    Send private message to this user   
It shows up on my computer, but will not read any disk is in the drive. I have tried all kinds of disks and unistalled reinstalled etc. This is the second HP burner in a year. It was working great then all of the sudden nothing is recognized. I am using AnyDVD program
Advertisement
_
__
AfterDawn Addict
_
29. November 2006 @ 08:12 _ Link to this message    Send private message to this user   
If ti won't need new disks, might just need a firmware update. Run neor info tool (found at this website) to find out your EXACT model number and firmware version. Then, post them here, and I'll see what I can do.

Also, post your other drives model number here too, and we'll see if we can fix it :D


kloge
Newbie
_
29. November 2006 @ 09:31 _ Link to this message    Send private message to this user   
The DVD not reading that there is a disk in it is TSSTcorp CD/DVDW TS-H552L firmware version is 0614
Slave which is working is ASUS DVD E616P3H
Like I stated earlier they were both working fine while I was burning several DVD's then all the sudden the first wouldnt read any disk was in it.
Thank you for your help.
Karen
AfterDawn Addict
_
29. November 2006 @ 09:38 _ Link to this message    Send private message to this user   
OK all firmware is up to date. Try going to hardware manager and uninstalling your drive and then rebooting the PC. Then let windows auto install it again, on startup!


kloge
Newbie
_
29. November 2006 @ 11:21 _ Link to this message    Send private message to this user   
I have done that, I have also unplugged then rebooted that way. Any other ideas?
Thanks
AfterDawn Addict
_
29. November 2006 @ 11:23 _ Link to this message    Send private message to this user   
Try cleaning the laser with a cottun bud and some rubbing alcohol to see if it is merely a dirty laser, stopping your disks being read.


kloge
Newbie
_
29. November 2006 @ 11:43 _ Link to this message    Send private message to this user   
OK, I will try that. Should I just have 2 things plugged into the back of the unit? I have the ribbon plug and the four holed plug but I see another that has four holes and is slightly bigger than a telephone wall plugin, should that be plugged in as well?
kloge
Newbie
_
29. November 2006 @ 11:57 _ Link to this message    Send private message to this user   
I tried cleaning it but no change, still get the insert disk.
kloge
Newbie
_
30. November 2006 @ 02:04 _ Link to this message    Send private message to this user   
Do you know of anything else I can try?
AfterDawn Addict
_
30. November 2006 @ 05:28 _ Link to this message    Send private message to this user   
Check it is set to master at the back
See this guide...
http://peripherals.about.com/od/cddvddri...llcddrive_3.htm


kloge
Newbie
_
1. December 2006 @ 08:58 _ Link to this message    Send private message to this user   
It is correct, I also took it apart and cleaned the laser. Still works to eject and light flashes when I put disk in it but it still wont read that anything is in the player/burner. Thank you for your help, I guess I will just give up on it.
Karen
AfterDawn Addict
_
1. December 2006 @ 09:03 _ Link to this message    Send private message to this user   
Yep, I starting to think your laser has died. To be honest, HP aren't known for their DVD Drive quality...


kloge
Newbie
_
2. December 2006 @ 06:02 _ Link to this message    Send private message to this user   
I will not use hp anymore, it is just what came in my computer. After the conversations with their customer service, I am done with hp all together!
I installed the new Lite-On and it worked fine. Thanks again for your time and help.
Karen
AfterDawn Addict
_
2. December 2006 @ 06:39 _ Link to this message    Send private message to this user   
Nice one; LiteOns are great drives :-D


This message has been edited since posting. Last time this message was edited on 2. December 2006 @ 06:40

jimmy4201
Newbie
_
14. January 2007 @ 10:36 _ Link to this message    Send private message to this user   
i have a tsst corp cd/dvdw ts-h552l and looking for firm ware where di u find it
AfterDawn Addict
_
14. January 2007 @ 10:37 _ Link to this message    Send private message to this user   


magwire
Newbie
_
29. January 2007 @ 19:33 _ Link to this message    Send private message to this user   
I to have a very similar problem. Same exact Samsung model, same firmware etc. There seemingly is no firmware to be found. It is also a slave and suddenly it will read no BLANK disks. It will read and play dvd and cd but wont burn because it recognizes no blank medium. Mine too was working fine and suddenly this happened. Very frustrating.
Advertisement
_
__
 
_
jimmy4201
Newbie
_
29. January 2007 @ 22:48 _ Link to this message    Send private message to this user   
its ur burners i had same trouble called hp got a new burner and problem solved
afterdawn.com > forums > pc hardware > dvd / blu-ray drives > is my hp burner dead?
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork