|
|
|
Could not perform end of disk-at-once
|
|
|
xpanmanx
Newbie
|
1. December 2006 @ 13:43 |
Link to this message
|
Hello, I cannot burn CDs, even at low speeds! Could one of the Nero gurus take a look at this log and provide some insight? Thanks very much!
TC Systems
TC Systems
1C82-****-****-****-****-****-****
Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8820 Z: CDRom0
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2045MB (2094668kB)
Free physical memory: 1322MB (1353908kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.12.2006
CD Image
17:30:53 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
17:30:53 #2 Text 0 File Burncd.cpp, Line 3149
PHILIPS DVD+-RW SDVD8820
Buffer underrun protection activated
17:30:53 #3 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using CD-R/RW media
17:31:56 #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359844 ( 79:59.69)
Last address to be written: 33759 ( 7:32.09)
17:31:56 #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
17:31:56 #6 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: PHILIPS DVD+-RW SDVD8820;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
17:31:56 #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)
17:31:56 #8 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 33760 (33760) = #33760/7:30.10
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 33610 blocks [Z: PHILIPS DVD+-RW SDVD8820]
--------------------------------------------------------------
17:31:56 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [Z: PHILIPS DVD+-RW SDVD8820] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 69447680, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 33760 | 33460 | 0x00
0 | 1 | 1 | 0x41 | 33760 | 33610 | 0x00
33760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
17:31:56 #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
17:31:56 #11 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
17:31:56 #12 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
17:31:56 #13 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
17:31:56 #14 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 10x (1,500 KB/s)
17:31:56 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:31:56 #16 Text 0 File MMC.cpp, Line 17552
StartDAO : CD-Text - Off
17:31:56 #17 Text 0 File MMC.cpp, Line 22179
Set BUFE: Buffer underrun protection -> ON
17:31:56 #18 Text 0 File MMC.cpp, Line 17780
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 07 20 0a
17:33:04 #19 Text 0 File WriterStatus.cpp, Line 113
<Z: PHILIPS DVD+-RW SDVD8820> start writing Lead-Out at LBA 33610 (834Ah), length 0 blocks
17:36:11 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
17:36:11 #21 CDR -1135 File ThreadedTransferInterface.cpp, Line 1920
Write error
Z: PHILIPS DVD+-RW SDVD8820
17:36:11 #22 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1920
Could not perform end of Disc-at-once
17:36:11 #23 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
17:36:12 #24 CDR -201 File WriterStatus.cpp, Line 162
Invalid write state
Z: PHILIPS DVD+-RW SDVD8820
17:36:12 #25 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
17:36:12 #26 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x07c1ecc0: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
17:36:12 #27 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 10x (1,500 KB/s)
17:36:12 #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:36:12 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
17:36:12 #30 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
17:36:12 #31 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
17:36:12 #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 2006-11-02 03:50:35
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006-08-24 21:47:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 21:47:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
2. December 2006 @ 01:05 |
Link to this message
|
Quote:
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F 3B 46 (LO 79:59.70)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
doesn't like disk......
Why are you buring a CD with Nero Vision? try Nero Burning ROM or Nero Express!
and if all else fails and you still can't get it to work:
Quote:
Drivers\CDRALW2K.SYS
you have packet writing software on your computer..... Roxio... most members agree that when Nero starts to fail it's because Roxio and Nero isn't so compatible with each other. Uninstall Roxio and try again....
|
AfterDawn Addict
|
2. December 2006 @ 01:35 |
Link to this message
|
|
AfterDawn Addict
|
2. December 2006 @ 02:36 |
Link to this message
|
|
thanks Gwendolin..... I forgot to add that in!
|
|
xpanmanx
Newbie
|
2. December 2006 @ 06:45 |
Link to this message
|
Quote:
Why are you buring a CD with Nero Vision? try Nero Burning ROM or Nero Express!
I didn't use NV. I definitely used Nero Burning Rom. Started it, went into the File menu to open the ISO, etc etc.
Quote:
you have packet writing software on your computer..... Roxio...
Not knowingly. I've never installed a Roxio product, ever, on any system. I've always used Nero.
Hmmm...this installation is on Vista. Is there a possibility that something's up with the OS? The only way to remove Windows CD-Writing services in Vista is to disable it through policy, because the service no longer appears in the Services MMC. Is there some other way?
As for interference from other programs, I have several other authoring and burning applications installed...DVDFab Platinum, DVD Decrypter, DVD Shrink and AnyDVD (none of these were running during when I captured the log). And, too, there's Microsoft's Windows DVD Maker. I also own UltraISO but doesn't it use the Nero engine for burning?
.
This message has been edited since posting. Last time this message was edited on 2. December 2006 @ 06:47
|
AfterDawn Addict
|
2. December 2006 @ 10:54 |
Link to this message
|
Quote:
Recorder: <PHILIPS DVD+-RW SDVD8820>Version: AD15
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Is your firmware the latest? I've checked with RPC forum and it's no where to be found. In addition, try another brand of media (i.e. Taiyo Yuden or Verbatim).
|
|
xpanmanx
Newbie
|
2. December 2006 @ 12:45 |
Link to this message
|
Quote:
Is your firmware the latest?
Damned if I know. I looked good and hard before I started this thread and I found zip.
Don't know why. It's not a rare drive. It's an all-media DL DVD-writer in a Dell XPS 1210m. Gotta be tens of thousands of them out there by now.
Just tried again with VB media and got no love.
This message has been edited since posting. Last time this message was edited on 2. December 2006 @ 12:55
|
AfterDawn Addict
|
2. December 2006 @ 12:59 |
Link to this message
|
|
Did you run the Roxio zapper, your log shows IT IS installed
Also slow burn to 4X
|
|
xpanmanx
Newbie
|
2. December 2006 @ 14:15 |
Link to this message
|
Quote:
Did you run the Roxio zapper, your log shows IT IS installed
Yup. Ran it, rebooted, and things still blew up. Should've mentioned that before, apologies.
I'll waste another CD on it this evening and capture the log (I forgot to save it last time). If CDRALW2K.SYS shows up in the log, the only thing I can think of is that it may very well be something new with Vista.
And I can only slow the burn to 10x.
This message has been edited since posting. Last time this message was edited on 2. December 2006 @ 14:16
|
|
xpanmanx
Newbie
|
3. December 2006 @ 00:13 |
Link to this message
|
|
Great, still getting errors. :<
TC SYSTEMS
TC SYSTEMS
****-****-****-****-****-****-****
Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS DVD+-RW SDVD8820>Version: AD15 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
PHILIPS DVD+-RW SDVD8820 Z: CDRom0
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2045MB (2094668kB)
Free physical memory: 1052MB (1078184kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.12.2006
CD Image
04:05:16 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
04:05:17 #2 Text 0 File Burncd.cpp, Line 3149
PHILIPS DVD+-RW SDVD8820
Buffer underrun protection activated
04:05:17 #3 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using CD-R/RW media
04:05:17 #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 33759 ( 7:32.09)
04:05:17 #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
04:05:17 #6 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: PHILIPS DVD+-RW SDVD8820;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: C0 40 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
04:05:17 #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
04:05:17 #8 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 33760 (33760) = #33760/7:30.10
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 33610 blocks [Z: PHILIPS DVD+-RW SDVD8820]
--------------------------------------------------------------
04:05:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [Z: PHILIPS DVD+-RW SDVD8820] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 69447680, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 33760 | 33460 | 0x00
0 | 1 | 1 | 0x41 | 33760 | 33610 | 0x00
33760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
04:05:19 #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
04:05:19 #11 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
04:05:19 #12 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
04:05:19 #13 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
04:05:19 #14 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 10x (1,500 KB/s)
04:05:19 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
04:05:19 #16 Text 0 File MMC.cpp, Line 17552
StartDAO : CD-Text - Off
04:05:20 #17 Text 0 File MMC.cpp, Line 22179
Set BUFE: Buffer underrun protection -> ON
04:05:20 #18 Text 0 File MMC.cpp, Line 17780
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 07 20 0a
04:06:35 #19 Text 0 File WriterStatus.cpp, Line 113
<Z: PHILIPS DVD+-RW SDVD8820> start writing Lead-Out at LBA 33610 (834Ah), length 0 blocks
04:09:16 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
04:09:16 #21 CDR -1135 File ThreadedTransferInterface.cpp, Line 1920
Write error
Z: PHILIPS DVD+-RW SDVD8820
04:09:16 #22 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1920
Could not perform end of Disc-at-once
04:09:16 #23 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
04:09:16 #24 CDR -201 File WriterStatus.cpp, Line 162
Invalid write state
Z: PHILIPS DVD+-RW SDVD8820
04:09:16 #25 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
04:09:16 #26 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x048c1e40: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
04:09:17 #27 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 10x (1,500 KB/s)
04:09:17 #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
04:09:17 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
04:09:17 #30 SPTI -1169 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
04:09:17 #31 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
04:09:17 #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 2006-11-02 03:50:35
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 2006-08-24 21:47:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
AfterDawn Addict
|
3. December 2006 @ 03:22 |
Link to this message
|
your packet writing program is gone (Roxio or whatever)... but you're still burning crappy media.... CMC Mags is not good media! sorry...... try burning higher than 10x on your CD media... sometimes burning too slowly is just as bad as burning too fast. And what are you doing? are you copying a CD or something? you are still getting: Quote:
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
Write error
Invalid write state
Notice the Invalid, Invalid, Invalid and NOT relocatable, NO disc pos, NO patch info which gets you a write error and an invalid write state. better media might correct this ..... what are you trying to burn to CD?
|
|
xpanmanx
Newbie
|
3. December 2006 @ 08:15 |
Link to this message
|
Quote:
what are you trying to burn to CD?
Heh, yeah, I guess I should try to burn more than one particular ISO, eh? Damn, that's pretty simple. I'll give it a go.
All of these attempts have been with a copy of Hiren's BootCD v8.6 which I pulled from the Usenet. There was no corruption evident in the downloaded archives, but that doesn't mean that corruption didn't exist before the poster packaged it. Back to you in a bit.
|
AfterDawn Addict
|
3. December 2006 @ 10:52 |
Link to this message
|
Quote:
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Your burner doesn't like the media you're using, try other high quality CD-R (i.e. Taiyo Yuden, Sony or Maxell).
NOTE: below is a successfully burned log of mine, compare yours to mine and see if you'll notice any differences.
Quote:
David X
XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX <====== EDITED
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 8:20:56 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS0B - HA 1 TA 2 - 7.5.9.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA ODD-DVD SD-M1802>Version: 1051 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380011A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-710A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA ODD-DVD SD-M1802 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-710A E: CDRom0
TOSHIBA ODD-DVD SD-M1802 F: CDRom1
LITE-ON DVDRW SHW-160P6S G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 644MB (659960kB)
Memory in use : 34
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.12.2006
CD-ROM (ISO)
2:19:50 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:19:50 AM #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:19:50 AM #3 Text 0 File Burncd.cpp, Line 3149
LITE-ON DVDRW SHW-160P6S
Buffer underrun protection activated
2:19:50 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
2:19:50 AM #5 Text 0 File Burncd.cpp, Line 3451
Turn on Track-At-Once, using CD-R/RW media
2:19:51 AM #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 352466 ( 78:21.41)
2:19:51 AM #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
2:19:51 AM #8 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: LITE-ON DVDRW SHW-160P6S;
CDR code: 00 97 24 11; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 40 98, 2: 61 18 0B (LI 97:24.11), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
2:19:51 AM #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:19:51 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 352467 (352467) = #352467/78:19.42
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 352465 blocks [G: LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------
2:19:51 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [G: LITE-ON DVDRW SHW-160P6S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 722159616, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 352467 | -150 | 0x00
0 | 1 | 1 | 0x41 | 352467 | 0 | 0x00
352467 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:19:51 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Removed 2 run-out blocks from end of track 1. Length: 352467 -> 352465.
2:19:51 AM #13 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:19:51 AM #14 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
2:19:51 AM #15 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
2:19:51 AM #16 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
2:19:51 AM #17 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 16x (2,400 KB/s)
2:19:51 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:19:51 AM #19 Text 0 File MMC.cpp, Line 22179
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
2:24:57 AM #20 Text 0 File MMC.cpp, Line 16997
<LITE-ON DVDRW SHW-160P6S> start Close Session
2:25:15 AM #21 Phase 37 File dlgbrnst.cpp, Line 1746
Burn process completed successfully at 16x (2,400 KB/s)
2:25:16 AM #22 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:25:16 AM #23 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
2:25:16 AM #24 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/16/2002 7:53:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 6/19/2006 10:05:45 PM (Prassi/Veritas driver for win 2K)
|
|
xpanmanx
Newbie
|
3. December 2006 @ 17:47 |
Link to this message
|
|
Tried another ISO...a Dell diagnostics disc image...it burned perfectly. Same media, same computer, same everything.
Tried the Hiren's ISO in another computer. Blew up, same as before.
Tried burning the Hiren's at DAO/96 and it appears to have worked wonderfully. YAY!
...but why is that?
|
|
auto1234
Junior Member
|
2. January 2007 @ 15:51 |
Link to this message
|
Originally posted by xpanmanx:
Tried another ISO...a Dell diagnostics disc image...it burned perfectly. Same media, same computer, same everything.
Tried the Hiren's ISO in another computer. Blew up, same as before.
Tried burning the Hiren's at DAO/96 and it appears to have worked wonderfully. YAY!
...but why is that?
-----------------------------
Hy, please can you tell me what is Hiren's at DAO/96 ? is it a software ?
|
|
xpanmanx
Newbie
|
2. January 2007 @ 18:23 |
Link to this message
|
|
Hiren's = a boot CD with a collection of utility software. Very useful in a pinch.
DAO/96 - disk at once, 96.
|
|
cahoot
Newbie
|
2. January 2007 @ 21:07 |
Link to this message
|
I thought I would throw this out there. I've tried a bunch of stuff but I'm not getting anywhere. I think this firmware is up to date. Everything use to work and then I updated Nero which messed things up, so I cleaned and reinstalled on my desktop and laptop. Desktop works fine now and laptop doesn't. Any help would be great, my eyes are burning!!!
I had a different disc in the drive when I tried to burn but it does the same all the time. Thanks in advance!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.N0 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23FB-60 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047992kB)
Free physical memory: 699MB (716360kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2007
NeroAPI
10:28:55 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:28:55 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:28:55 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:28:55 PM #4 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
10:28:55 PM #5 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
10:28:55 PM #6 Text 0 File Reader.cpp, Line 127
Reader running
10:28:55 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:28:56 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:28:56 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:28:57 PM #10 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:30:00 PM #11 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2204015 (489:46.65, 4304MB)
10:30:00 PM #12 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
10:30:00 PM #13 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193
10:30:00 PM #14 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: CD-RW. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:30:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2204016 (2204016) = #2204016/489:46.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2204016 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
10:30:00 PM #16 Text 0 File Burncd.cpp, Line 3828
Can only write at 2.4x (3,324 KB/s) instead of 4x (5,540 KB/s) to current disc.
10:30:00 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4513824768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2204016 | lead-out | 1 | 0x41 | 0x00
10:30:00 PM #18 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:30:00 PM #19 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:30:00 PM #20 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:30:00 PM #21 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
10:30:00 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:30:00 PM #23 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
10:30:00 PM #24 Text 0 File Mmc.cpp, Line 21774
Set BUFE: JustLink -> ON
10:30:00 PM #25 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
10:30:00 PM #26 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:30:00 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xA1 0x70 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
10:30:00 PM #28 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
10:30:00 PM #29 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
10:30:00 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
10:30:00 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:30:00 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
10:30:04 PM #33 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
10:30:05 PM #34 Text 0 File DVDR.cpp, Line 6573
Book Type counter: 500, Book Type selected in EEPROM, command version 2
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
cahoot
Newbie
|
5. January 2007 @ 13:04 |
Link to this message
|
|
Anyone out there?
|
|
