|
|
|
Illegal disc when trying to burn data dvd
|
|
|
pkaksp
Moderator
|
10. December 2006 @ 02:44 |
Link to this message
|
Hi guys!
My friend has a problem when burning a data dvd and I hope that someone could help me with this. Nero says illegal disc and I haven´t got a clue wtf to do. Drive is NEC DVD+-RW ND-6500A in Fujitsu Siemens laptop and I couldn´t find newer firmware in it. Discs are Fujifilm and Sony DVD-R. The problem came after formatting and reinstalling windows.
Here´s Nero log file;
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2.11.2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.40 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 2.40 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 495MB (507248kB)
Free physical memory: 75MB (77224kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.12.2006
UDF compilation
17:30:56 #1 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
17:30:56 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
17:30:56 #3 Text 0 File Reader.cpp, Line 124
Reader running
17:30:57 #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
17:30:57 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1918767 (426:23.42, 3747MB)
17:30:57 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
17:30:57 #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
17:30:57 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:30:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1918768 (1918768) = #1918768/426:23.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1918768 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
17:30:58 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3929636864, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1918768 | lead-out | 1 | 0x41 | 0x00
17:30:58 #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
17:30:58 #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:30:58 #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
17:30:58 #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
17:30:58 #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
17:30:58 #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3 324 KB/s)
17:30:58 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:30:58 #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
17:30:58 #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
17:30:58 #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:30:58 #21 SPTI -1046 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 1D 47 30 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
17:30:58 #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
D: _NEC DVD+-RW ND-6500A
17:30:58 #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
17:30:58 #24 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3 324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25.8.2006 5:47:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25.8.2006 5:47:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 10. December 2006 @ 02:46
|
|
Advertisement
|
|
|
|
Senior Member
|
10. December 2006 @ 05:19 |
Link to this message
|
It's recognizing the media as -r but then using +r write stratigy and setting burn at 2.4x. It could be a compatibilty issue caused by this Quote:
File 'Drivers\CDRALW2K.SYS
Get roxio zapper to remove that.
|
|
pkaksp
Moderator
|
10. December 2006 @ 05:52 |
Link to this message
|
Ok, tried that but unfortunately it didn´t help. :/ Any suggestions? Here´s new log from Nero.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2.11.2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.40 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 2.40 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 495MB (507248kB)
Free physical memory: 50MB (51996kB)
Memory in use : 89 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.12.2006
UDF compilation
17:45:14 #1 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
17:45:14 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 70656KB of Memory
17:45:14 #3 Text 0 File Reader.cpp, Line 124
Reader running
17:45:14 #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
17:45:15 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1918767 (426:23.42, 3747MB)
17:45:15 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
17:45:15 #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
17:45:15 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:45:15 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1918768 (1918768) = #1918768/426:23.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1918768 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
17:45:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3929636864, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1918768 | lead-out | 1 | 0x41 | 0x00
17:45:15 #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
17:45:15 #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:45:15 #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
17:45:16 #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
17:45:16 #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
17:45:16 #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2x (2 770 KB/s)
17:45:16 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:45:16 #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
17:45:16 #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
17:45:16 #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:45:16 #21 SPTI -1046 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 1D 47 30 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
17:45:16 #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
D: _NEC DVD+-RW ND-6500A
17:45:16 #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
17:45:16 #24 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2x (2 770 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25.8.2006 5:47:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
pkaksp
Moderator
|
22. December 2006 @ 11:02 |
Link to this message
|
|
Hi, I still have the problem unsolved. Anyone have any suggestions or ideas?
|
Moderator
|
22. December 2006 @ 11:50 |
Link to this message
|
|
Hi pkaksp
Have you tried any other media - like 8x? Laptop burners seem much pickier w/ 16x media. Mine is not too fond of it.
Usually the illegal disc bit is because the firmware doesn't have the media codes for the disc you are using. Another sign is not getting a burn speed higher than 2.4x - can also mean drive isn't recognizing it.
Looks like the last firmware for this was in 2004.
Physical memory : 495MB
Free physical memory: 75MB
Memory in use : 84 %
Try and free up some memory - 84% in use.
|
|
Garcia65
Newbie
|
1. January 2007 @ 20:18 |
Link to this message
|
I have a problem burning DVD-R I used to be able to burn them but no longer will play them. I can burn +r. I tried updating firmware but to no avail. Could someone take a look at this error log and see if you can make sense of it please, Thanks!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203E - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 203E - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HTS541040G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2039MB (2088256kB)
Free physical memory: 1455MB (1490768kB)
Memory in use : 28
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2007
ISO compilation
12:28:48 AM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:28:48 AM #2 Text 0 File Reader.cpp, Line 127
Reader running
12:28:48 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:28:48 AM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:28:49 AM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 607 ( 0:08.07, 1MB)
12:28:49 AM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:28:49 AM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
12:28:49 AM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:28:49 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
12:28:52 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
608 | lead-out | 1 | 0x41 | 0x00
12:28:52 AM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:28:53 AM #12 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:28:53 AM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:28:53 AM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
12:28:53 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:28:54 AM #16 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
12:28:54 AM #17 Text 0 File Mmc.cpp, Line 21774
Set BUFE: JustLink -> ON
12:28:54 AM #18 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
12:28:54 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:28:54 AM #20 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
12:28:54 AM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
12:28:54 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
12:28:54 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 6/6/2006 2:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2/28/2006 7:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Andrew K Foust
|
|
Garcia65
Newbie
|
1. January 2007 @ 20:26 |
Link to this message
|
|
Sorry I said in the previous post that It would no longer play -R but it will play them just not burn.
Andrew K Foust
|
Moderator
|
2. January 2007 @ 14:56 |
Link to this message
|
Hi Garcia65
The illegal disc error you're getting usually means that the media codes/write strategy for the dvd's you are using is not included in the firmware.
The firmware is up to date but your drive still doesn't like the Sony 16x you're using.
If the max burn Nero will allow for this disc is 2.4x that's another indication that the drive doesn't have the firmware to support these.
What brand and rated speed of the +R media is working for you?
For the -R's try another brand like Verbatim or made in Japan Fuji or Maxell. Get 8x media if you can.
|
|
pkaksp
Moderator
|
4. January 2007 @ 01:19 |
Link to this message
|
Thanks alot binkie7!
Quote:
Have you tried any other media - like 8x? Laptop burners seem much pickier w/ 16x media. Mine is not too fond of it.
Told my friend to try 8x media and u know what, it worked. Solution was so simple. :)
|
|
Garcia65
Newbie
|
4. January 2007 @ 07:30 |
Link to this message
|
|
Thanks for the suggestion I have tried other media but no luck. My burner used to burn these Sony disc at 8X but now only 4X. This all started when I had to reinstall Windows XP after trying Vista for a while.
Andrew K Foust
|
Moderator
|
4. January 2007 @ 14:40 |
Link to this message
|
@pkaksp
You're welcome :) Glad that did the trick!
@Garcia65
You can try uninstalling the ide channel (secondary) - rebooting and let windows do it's thing & reinstall.
Right click on 'my computer' > properties> hardware tab > device manager.
Click on the + sign next to ide/ata controllers. Right click on secondary > uninstall.
What other brand did you try? Like Verbatim +R 16x
What are the burn speeds Nero lists when the disc is in the drive?
|
|
Garcia65
Newbie
|
4. January 2007 @ 16:10 |
Link to this message
|
This is the info from my drive I tried to unistall like you said no luck. I am getting very upset with this thing. Thank You for your suggestions anymore help would be welcome. I have a laptop I am going to buy an external Drive but I want this one to work as well!
drive Information
------------------
Drive : _NEC DVD+-RW ND-6500A
Type : DVD±R/RW DL Recorder
Firmware Version : 203E
Buffer Size : 2 MB
Date : ?
Serial Number : 57D3228C
Vendor Specific : 06120800
Drive Letter : D:\
Location : 1:0
Mechanism : Tray
Read Speed : 61 , 38 X
Write Speed : n/a
Read CD Text : Yes
Return C2 Pointers : Yes
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : Yes
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : Yes
Write DVD-RW : Yes
Write DVD-R DL : No
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : Yes
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Buffer Underrun Protection : Yes
Mount Rainier : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
Region Protection Control : RPC II
Region : 1
Changes User : 4
Changes Vendor : 4
Disc Information (D:\)
-------------------
Type : Blank DVD-R
Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel
Driver
Description : system32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: Hitachi HTS541040G9AT00
Type : Disk Drive
DMA : On
Adapter 2
---------
Description : Secondary IDE Channel
Driver
Description : system32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: _NEC DVD+-RW ND-6500A
Type : CD-Rom Drive
DMA : On
Autorun : On
Adapter 3
---------
Description : OHCI Compliant IEEE 1394 Host Controller
Driver
Description : system32\DRIVERS\ohci1394.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : 1394 OpenHCI Port Driver
Attached Devices
Description : LaCie Group SA LaCie Hard Drive FireWire+ IEEE 1394 SBP2 Device
Type : Disk Drive
Description : LaCie Group SA LaCie Hard Drive FireWire+ IEEE 1394 SBP2 Device
Type : Disk Drive
Software Information
--------------------
Operating System : Windows XP Home Edition (5.01.2600 Service Pack 2)
DirectX : DirectX 9.0c
Description : Nero Burning ROM
Version : 6, 6, 0, 18
Company : Ahead Software AG
Version Check : Ok
Description : Nero StartSmart
Version : 2, 0, 0, 28
Company : Ahead Software AG
Description : Cover Designer
Version : 2, 3, 0, 50
Company : Nero AG
Description : Nero BackItUp Application
Version : 1, 2, 0, 60
Company : Ahead Software AG
Description : Sonic MyDVD
Version : 5, 3, 0, 0
Company : Sonic Solutions
Hardware Information
--------------------
CPU : 1300 MHz
Bus Speed : 133 MHz
Motherboard : Dell 0W9260
System : Dell Inspiron 6000
BIOS : Dell A09
Memory : 2039 MB
Sound : USB Audio
Video : Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
Andrew K Foust
|
Moderator
|
4. January 2007 @ 17:39 |
Link to this message
|
|
I can feel ya on the frustration trying to get this burner to burn.
Laptop burners aren't the best imho.
The only other suggestion I can offer is use 8x media only.
The external is not a bad idea - better to have this drive read and let the external burn.
It's one reason I picked up an external :)
|
Moderator
|
4. January 2007 @ 18:51 |
Link to this message
|
Sorry Garcia65 forgot 1 thing from your log:
Disc Information (D:\)
-------------------
Type : Blank DVD-R
The drive knows there's a dvd -r there just doesn't give the rest of the info it usually does - like burn speeds. So it doesn't fully recognize it hence the illegal disc error.
|
|
Advertisement
|
|
|
|
Garcia65
Newbie
|
5. January 2007 @ 05:18 |
Link to this message
|
|
Thanks!
Andrew K Foust
|
|
