|
|
|
DVD Burn - Nero Error
|
|
|
vmanohar
Newbie
|
28. December 2006 @ 20:41 |
Link to this message
|
Hello,
I read through this thread on 'Illegal Disc' error in Nero. I did the fixes suggested there - updating the firmware of my burner & also problems with MusicMatch/Itunes. But I still have the problem.
Incidentally, it works with a 8x compatible media but not on a 16x. I have tried different media (Sony, TDK), but the problem persists.
Here is the log file -
------
Manohar
USF
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 4:33:44 PM
Nero version: 6.3.1.25
Recorder: <_NEC DVD+-RW ND-6500A> Version: 203E - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 203E - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS548060M9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6500A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1006MB (1030576kB)
Free physical memory: 639MB (654336kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.12.2006
===== Disc-Copy over image - 1st step : Copy to image ...
1:09:19 AM #1 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
1:09:19 AM #2 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
1:09:19 AM #3 Text 0 File Reader.cpp, Line 126
Reader running
1:09:19 AM #4 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
1:09:19 AM #5 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2165840 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)
1:09:19 AM #6 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2165840 = 2165840, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
1:09:19 AM #7 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
1:09:19 AM #8 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2165839 (481:17.64, 4230MB)
1:09:19 AM #9 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
1:09:19 AM #10 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
1:09:19 AM #11 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:09:19 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2165840 (2165840) = #2165840/481:17.65
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2165840 blocks [ Image Recorder ]
--------------------------------------------------------------
1:09:19 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4435947520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2165840 | lead-out | 1 | 0x00 | 0x41
1:09:19 AM #14 Phase 120 File dlgbrnst.cpp, Line 1855
Creating the image for burning
1:09:20 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:18:52 AM #16 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2165840 (210C50h), lenght 0 blocks
1:18:52 AM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:18:53 AM #18 Phase 121 File dlgbrnst.cpp, Line 1855
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
1:19:00 AM #1 Text 0 File Reader.cpp, Line 126
Reader running
1:19:00 AM #2 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD+-RW ND-6500A running
1:19:00 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 140980224
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=481:17.65 ( 2165840)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Manohar\My Documents\TempImage.nrg>
1:19:00 AM #4 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
1:19:29 AM #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2165839 (481:17.64, 4230MB)
1:19:29 AM #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
1:19:29 AM #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
1:19:29 AM #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
1:19:29 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2165840 (2165840) = #2165840/481:17.65
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2165840 blocks [_NEC DVD+-RW ND-6500A]
--------------------------------------------------------------
1:19:29 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4435640320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2165840 | lead-out | 1 | 0x00 | 0x41
1:19:29 AM #11 Phase 28 File dlgbrnst.cpp, Line 1855
Speed measurement started
1:19:29 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:23:16 AM #13 Text 0 File WriterStatus.cpp, Line 115
<_NEC DVD+-RW ND-6500A> start writing Lead-Out at LBA 2165840 (210C50h), lenght 0 blocks
1:23:16 AM #14 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:23:16 AM #15 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
1:23:16 AM #16 Phase 29 File dlgbrnst.cpp, Line 1806
Speed measurement completed: 14.2x (19,616 KB/s)
1:23:17 AM #17 Phase 32 File dlgbrnst.cpp, Line 1855
Simulation started at 2.4x (3,324 KB/s)
1:23:17 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
1:23:17 AM #19 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 22:21,423 (1341423ms) -> OK
1:23:17 AM #20 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
1:23:17 AM #21 Text 0 File Mmc.cpp, Line 20660
Set BUFE: JustLink -> ON
1:23:17 AM #22 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
1:23:17 AM #23 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:23:17 AM #24 SCSI -1046 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x0C 0x50 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
1:23:17 AM #25 SCSI -1065 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A47000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:23:17 AM #26 SCSI -1065 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A47000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xC9 0x02 0x02 0x01 0x42 0x54 0x59 0x50 0x45 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
1:23:17 AM #27 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
_NEC DVD+-RW ND-6500A\H1 T0
1:23:17 AM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
1:23:17 AM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
1:23:18 AM #30 Phase 34 File dlgbrnst.cpp, Line 1855
Simulation failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/1/2005 6:33:49 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----
Please help.
Thanks in advance.
|
AfterDawn Addict
|
28. December 2006 @ 21:27 |
Link to this message
|
|
|
