|
|
|
Nero failed Ripping burned DVDs
|
|
|
ZignZag
Newbie
|
28. December 2006 @ 23:18 |
Link to this message
|
I have been using DVD Shrink, Nero, RipIT4me to make back ups of my DVDs. Happy I was able to do this because now my kids have scratched several burned DVDs. DVD's still play, but I recently tried to reburn a dvd on Nero from a copied DVD. Figured I could just save time and make an exact copy of my burned copy. It failed to burn and when I try RipIT4me or DVD Shrink it fails to read.
So why can't I reburn DVD from a copied DVD? What am I doing wrong? Do I always have to burn from the original DVD?
|
|
Advertisement
|
|
|
|
Moderator
|
29. December 2006 @ 11:32 |
Link to this message
|
|
Hi ZignZag
I don't think you're doing anything wrong. More like the discs are just to bad of shape to re ripped.
Players can be more forgiving with scratches - ripping isn't- tries to rip every byte.
Usually you can just do a copy to copy when you want to do a another copy but for these looks like you'll need to use the original to get another backup.
|
|
ZignZag
Newbie
|
29. December 2006 @ 16:09 |
Link to this message
|
Well, I was thinking the same thing and tried with a unscratched copied DVD and it failed on Nero copy to copy. Also tried making 2 Seinfelds one for my Cabin and the other for here at home... first from original and second burn from the unscratched copy which failed. I was able to use DVD Decrypter and Nero for the one copied DVD movie but was not able to copy Seinfeld from onother copied DVD. Had to make both back ups from Original. I just don't understand why I can't make a back up from a back up. Theoretically I should be able to by pass many steps for a quick and easy burn since I have already done the compression and protection removal.
|
Moderator
|
29. December 2006 @ 16:40 |
Link to this message
|
Yes you should be able to do a copy to copy. I do and usually not a problem.
So what media are you using? Poorer quality media can degrade after time and be hard to copy from. 1st I'll try Nero - copy to copy - if that fails then I rip w/ decrypter. If that fails I pretty much know it's a lost cause.
How about the drive(s) - firmware up to date?
|
|
ZignZag
Newbie
|
29. December 2006 @ 20:34 |
Link to this message
|
|
Sony and Memorex is what i am using.
It is not a time issue. I am doing it back to back when I tried to burn a copy of a copy of Seinfeld. It is literally seconds after I finish burning off the original when I try to copy a copy.
|
Moderator
|
29. December 2006 @ 21:15 |
Link to this message
|
Ok post the last failed burn log from Nero. Let's take a peek and see what's going on.
Look here for them - just be sure to edit out the serial # - usually begin w/ 1A, 1C or 5C.
You can find them here:
Using Nero 6: program files>ahead>nero>nerohistory
Using Nero 7: programs files>nero>nero 7>core>nerohistory
|
|
ZignZag
Newbie
|
30. December 2006 @ 16:44 |
Link to this message
|
Nero version 6,3,1,19
There is no Nerohistory folder
looked in all folders: program files/ahead/....All files under Ahead...
No history folder to be found.
|
|
ZignZag
Newbie
|
30. December 2006 @ 17:15 |
Link to this message
|
edited by creaky to leave only the last logfile entry..
Thought I was looking for a folder, Here is the Nerohistory file.
The Seinfeld burns were before Dec. 22, 2006
The movie copy from copy was the day of or just before start of this post, first try copy to copy failed but then I DVD decrypted movie copy and burned with Nero. Success on movie not Seinfeld
Seinfeld was copied from original using latest version of RipIt4Me .
______________________________________________________________
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.19 (Nero Express)
Recorder: <SONY DVD RW DW-Q28A> Version: KFS1 - HA 0 TA 0 - 6.3.1.19
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1615 >Version: FFS1 - HA 0 TA 1 - 6.3.1.19
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD2500JS-98MHB0 atapi Port 1 ID 0 DMA: On
OtherPeripheral : HP C5110A 3638 adpu160m Port 3 ID 2 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-Q28A H: CDRom0
SONY DVD-ROM DDU1615 I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1014MB (1038504kB)
Free physical memory: 426MB (436524kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.12.2006
UDF/ISO compilation
1:22:24 AM #1 Phase 112 File dlgbrnst.cpp, Line 1865
DVD-Video files reallocation started
1:22:24 AM #2 Phase 114 File dlgbrnst.cpp, Line 1865
DVD-Video files reallocation completed (no file modified)
1:22:24 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:22:24 AM #4 Phase 111 File dlgbrnst.cpp, Line 1865
DVD-Video files sorted
1:22:24 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
1:22:24 AM #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DW-Q28A running
1:22:24 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:22:24 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:22:24 AM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media
1:22:25 AM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286143 (508:01.68, 4465MB)
1:22:25 AM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
1:22:25 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DW-Q28A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R04, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
1:22:25 AM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:22:25 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286144 (2286144) = #2286144/508:1.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286144 blocks [SONY DVD RW DW-Q28A ]
--------------------------------------------------------------
1:22:25 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DW-Q28A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682022912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286144 | lead-out | 1 | 0x00 | 0x41
1:22:25 AM #16 Phase 24 File dlgbrnst.cpp, Line 1865
Caching of files started
1:22:25 AM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
1:22:25 AM #18 Phase 25 File dlgbrnst.cpp, Line 1865
Caching of files completed
1:22:25 AM #19 Phase 36 File dlgbrnst.cpp, Line 1865
Burn process started at 16x (22,160 KB/s)
1:22:25 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:22:25 AM #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: PRODISC.
Media type ID: R04
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 50 52 4F 44 49 - 53 43 00 52 30 34 04 38 ...PRODISC.R04.8
23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
1:22:25 AM #22 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 3:38,169 (218169ms) -> OK
1:22:25 AM #23 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
1:28:14 AM #24 Text 0 File WriterStatus.cpp, Line 115
<SONY DVD RW DW-Q28A > start writing Lead-Out at LBA 2286144 (22E240h), lenght 0 blocks
1:28:14 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:28:25 AM #26 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK
1:28:25 AM #27 Text 0 File dlgbrnst.cpp, Line 1723
Set remaining time: 0:00,000 (0ms) -> OK
1:28:25 AM #28 Phase 37 File dlgbrnst.cpp, Line 1865
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/28/2005 2:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.10a, size=46080 bytes, created 10/28/2005 2:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 1, size=92672 bytes, created 7/12/2004 2:40:00 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 1, size=28672 bytes, created 7/12/2004 2:40:42 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 1, size=7680 bytes, created 7/12/2004 2:44:06 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 31. December 2006 @ 05:40
|
Moderator
|
30. December 2006 @ 18:37 |
Link to this message
|
Ok - here are some suggestions
DVD-Copy on the fly
When doing the copy to copy turn off burn on the fly/quick copy.
This does the copying in 'real' time so any little glitch and bam the burn fails and you have a coaster.
Let Nero save the files temporarily to the hard drive then it will start the burn.
Burn process completed successfully at 16x
Take the burn speed down to 8x.
Nero API version: 6.3.1.19
Update Nero to 6.6.0.18. Right now Nero only recognizes the burner as a generic drive - Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
Here's the links for that version:
Package 1
Package 2 (recode, vision)
File 'Drivers\CDRALW2K.SYS' & File 'Drivers\InCDfs.SYS'
Roxio and Nero don't always play well esp. when Nero's InCd is installed.
So you can uninstall Roxio and run the zap tool.
If you're not using InCD uninstall that too and run the clean tool for it.
|
|
ragui233
Newbie
|
12. January 2007 @ 08:28 |
Link to this message
|
Hello everybody, I need some help. IŽbeen burning DVDs with Nero 6 and DVD Shrink since time ago with no problem. But since last month I can read DVDs but not write them.It shows me a message: "formatting disc failed". I have a Matshita DVD-Ram UJ-820S V1.50.
Please, if someone knows a solution. thx.
|
Moderator
|
12. January 2007 @ 14:15 |
Link to this message
|
Hi ragui233
Using RW discs? If so do a full erase if you aren't already.
Have you tried any other media?
Post your last Nero log and we can take a peek - see my post above on where to find them.
|
|
ragui233
Newbie
|
19. January 2007 @ 10:20 |
Link to this message
|
Originally posted by binkie7:
Hi ragui233
Using RW discs? If so do a full erase if you aren't already.
Have you tried any other media?
Post your last Nero log and we can take a peek - see my post above on where to find them.
|
|
ragui233
Newbie
|
19. January 2007 @ 10:23 |
Link to this message
|
Originally posted by binkie7:
Hi ragui233
Using RW discs? If so do a full erase if you aren't already.
Have you tried any other media?
Post your last Nero log and we can take a peek - see my post above on where to find them.
Here You go, thanks for help.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 20/11/2005 11:48:21 p.m.
ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 19/01/2007 11:53:17 a.m.
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <MATSHITA DVD-RAM UJ-820S>Version: 1.50 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-820S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-820S D: CDRom0
Generic DVD-ROM E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2014MB (2062768kB)
Free physical memory: 1479MB (1514588kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.1.2007
Burn DVD Image
02:15:31 p.m. #1 Text 0 File Reader.cpp, Line 127
Reader running
02:15:31 p.m. #2 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
02:15:32 p.m. #3 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2069506 (459:53.31, 4042MB)
02:15:32 p.m. #4 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
02:15:32 p.m. #5 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MATSHITA DVD-RAM UJ-820S, Media type: DVD+RW
Disc Manufacturer ID: INFODISC, Media Type ID: A10, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
02:15:32 p.m. #6 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
02:15:32 p.m. #7 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2069507 (2069507) = #2069507/459:53.32
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2069507 blocks [MATSHITA DVD-RAM UJ-820S]
--------------------------------------------------------------
02:15:32 p.m. #8 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MATSHITA DVD-RAM UJ-820S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4238350336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2069507 | lead-out | 1 | 0x41 | 0x00
02:15:32 p.m. #9 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
02:15:32 p.m. #10 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
02:15:32 p.m. #11 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
02:15:32 p.m. #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
02:15:32 p.m. #13 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
02:15:32 p.m. #14 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: INFODISC
Media type ID: A10
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 49 4E 46 4F 44 - 49 53 43 41 31 30 01 39 ...INFODISCA10.9
23 00 9C 7C 5C 02 28 00 - 96 7E 70 02 28 00 9C 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
02:15:32 p.m. #15 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning
02:15:32 p.m. #16 SCSI -1106 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03BF6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
02:15:32 p.m. #17 Phase 101 File dlgbrnst.cpp, Line 1832
Formatting disc failed
02:15:32 p.m. #18 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
02:15:32 p.m. #19 CDR -1106 File ThreadedTransferInterface.cpp, Line 1771
Power calibration error
02:15:32 p.m. #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771
Could not perform start of Disc-at-once
02:15:32 p.m. #21 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 20/11/2005 11:48:21 p.m.
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17/11/2005 10:19:28 a.m. (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 11:59:44 p.m. (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 03:31:48 p.m. (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
Moderator
|
19. January 2007 @ 14:33 |
Link to this message
|
|
Ok your burner is having a hard time with that +RW disc your using.
Have you tried doing a full erase on it?
Try using one that hasn't been burned to yet.
Any problems w/ - or + R media (not RW)
|
|
