|
|
|
Shrink/Nero Error
|
|
|
kstepan50
Junior Member
|
29. December 2006 @ 15:53 |
Link to this message
|
Here is the problem. My old DVD burner burnt out. So i got a new one. It's a Lite On LH-20A1P. I enabled the booktype DVD+R to DVD-ROM with their program but still had a problem that the book type feature of Shrink was greyed out. So i decided to upgrade to the newest version of Nero and i am now getting an error message when attempting to burn., What am i doing wrong. Should i go back to the older version? If you can give me any advice to get the burner to work and to get the DVD+R to DVD-ROM please let me know. Here is the error log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 9, 0
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL02 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L100P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4481B D: CDRom0
LITE-ON DVDRW LH-20A1P E: CDRom1
BY2055I YSN761Q I: CDRom2
BY2055I YSN761Q J: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 190MB (195156kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.12.2006
NeroAPI
4:59:30 PM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
4:59:30 PM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
4:59:30 PM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
4:59:30 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
4:59:30 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:59:30 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
4:59:30 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
4:59:30 PM #8 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
4:59:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2227759 (495:03.34, 4351MB)
4:59:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
4:59:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
4:59:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:59:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2227760 (2227760) = #2227760/495:3.35
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227760 blocks [E: LITE-ON DVDRW LH-20A1P]
--------------------------------------------------------------
4:59:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562452480, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2227760 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2227760 | 0 | 0x00
2227760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
4:59:31 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:59:31 PM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
4:59:31 PM #17 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
4:59:31 PM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
4:59:31 PM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)
4:59:31 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:59:31 PM #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
4:59:31 PM #22 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: No
4:59:48 PM #23 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x190a0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:59:48 PM #24 CDR -1106 File Writer.cpp, Line 299
Power calibration error
E: LITE-ON DVDRW LH-20A1P
4:59:48 PM #25 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)
4:59:48 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
4:59:48 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
4:59:49 PM #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:59:52 PM #29 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
4:59:52 PM #30 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
29. December 2006 @ 18:30 |
Link to this message
|
I looked for a firmware update for your new 20X Lite-On. I didn't find any.
I notice your DMA is diabled so you should enable that.
Quote:
CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 1 ID 1 DMA: Off
Power calibration errors are usually a sign of poor power to your burner, a bad burner, cable connection or bad media. You have a new burner and are using excellent T-Ys so that shouldn't be a problem.
Double check all your connections on your new drive and make sure the jumper position is correct. Usually setting it the way the original burner had it's jumper set is what I do.
Get the DMA enabled.
Do a simulated burn with Nero to check.
Power calibration error guide:
http://www.dvdplusvideo.com/dvdguide001.html
Enable DMA guide:
http://www.dvdplusvideo.com/dvdguide005.html
I'd like to know more about the media you are using. I think you should try Verbatim +R at some point.
I did a Google search with the media ID listed in your log and got this:
http://club.cdfreaks.com/showthread.php?t=139535
This message has been edited since posting. Last time this message was edited on 29. December 2006 @ 18:39
|
Moderator
|
30. December 2006 @ 04:49 |
Link to this message
|
|
thread teleported to relevant forum
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
kstepan50
Junior Member
|
30. December 2006 @ 06:32 |
Link to this message
|
i changed the dvd burner to the first on the cable and set it to cable select. i have a dell. here is what i got as an error now
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.5.9.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 9, 0
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL02 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6L100P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4481B atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : BY2055I YSN761Q 2.0B vaxscsi Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW LH-20A1P D: CDRom0
HL-DT-ST RW/DVD GCC-4481B E: CDRom5
BY2055I YSN761Q I: CDRom2
BY2055I YSN761Q J: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 210MB (215488kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.12.2006
NeroAPI
8:12:15 AM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
8:12:15 AM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
8:12:15 AM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
8:12:15 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
8:12:15 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
8:12:15 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
8:12:15 AM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
8:12:15 AM #8 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
8:12:16 AM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2227759 (495:03.34, 4351MB)
8:12:16 AM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
8:12:16 AM #11 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
8:12:16 AM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:12:16 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2227760 (2227760) = #2227760/495:3.35
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227760 blocks [D: LITE-ON DVDRW LH-20A1P]
--------------------------------------------------------------
8:12:16 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [D: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562452480, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2227760 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2227760 | 0 | 0x00
2227760 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
8:12:16 AM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:12:16 AM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
8:12:16 AM #17 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
8:12:16 AM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
8:12:16 AM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 4x (5,540 KB/s)
8:12:16 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:12:16 AM #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
8:12:16 AM #22 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: No
8:12:33 AM #23 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x09760040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
8:12:33 AM #24 CDR -1106 File Writer.cpp, Line 299
Power calibration error
D: LITE-ON DVDRW LH-20A1P
8:12:33 AM #25 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 4x (5,540 KB/s)
8:12:33 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
8:12:33 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
8:12:33 AM #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:12:36 AM #29 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
8:12:36 AM #30 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
kstepan50
Junior Member
|
30. December 2006 @ 06:39 |
Link to this message
|
never mind i figured it out. But i should have only done one thing at a time to verify what was the problem, but i changed the disk to a new one and i did a DRM force thing from Dell. The old disk i had been using was the same one that kept giving me a power calibration error and the one i used when i was still in PIO. One of theose things worked. Thanks all for your help
|
AfterDawn Addict
|
31. December 2006 @ 02:27 |
Link to this message
|
I'm glad it's working for you. Could you tell us more about the Dell Force DRM thing?
|
|
kstepan50
Junior Member
|
31. December 2006 @ 06:57 |
Link to this message
|
i searched google and came across a dell web site that had a small program (which i can not find anymore) to force the burners into DMA. It says that soemtimes on dell computers when you put a new burner in it, it gets stuck in PIO mode and you have to run this small program. It worked like it said. And i did confirm that that was the problem and not the disks.
And sorry, i should have said DMA nor DRM
|
AfterDawn Addict
|
31. December 2006 @ 18:25 |
Link to this message
|
I think I found it. It's called PIOtoDMA.exe
Is that what you used?
From Dell:
Quote:
This utility can be used to set secondary IDE CD-ROM devices back to a UDMA mode after the Operating System (WindowsXP) has set the device to PIO mode.
http://support.dell.com/support/download...86&fileid=63977
|
|
kstepan50
Junior Member
|
31. December 2006 @ 19:50 |
Link to this message
|
|
yeah, thats it. Worked just like it should for me
|
AfterDawn Addict
|
31. December 2006 @ 20:52 |
Link to this message
|
|
kewl! I downloaded it from Dell and put it at my site so I have it for everyone who needs it. Man, that Dell site is a pain in the butt.
|
|
Advertisement
|
|
|
|
kstepan50
Junior Member
|
1. January 2007 @ 04:46 |
Link to this message
|
|
yeah, i looked for about 10 mins and came up with nothing. What is your site?
|
|
