|
|
|
Can't Burn DVD's via FireWire
|
|
|
afcouling
Newbie
|
30. December 2006 @ 07:17 |
Link to this message
|
I have a LaCie d2 DVD+-RW External burner and use Nero 6.
I have had little success in burning data to DVD disc via its FireWire 400 interface. I have tried burning at different speeds, from 4x up to 16x.
I have however, managed to repeatedly burn dvd's via the USB 1.1 interface at an unreachable 16x. The problem being that it takes about 2 hours to burn a full DVD with USB 1.1.
I have been using Verbatim (MCC) media, which I believe to be of good quality.
I have seen a few different faults whilst burning via FireWire.
Sometimes Nero will report "invalid block address", and other times Nero will just stop burning at a varying point thru the process and just "hang".
I am considering upgrading to USB 2.0, but suspect that the problem lies with my choice of media, rather than my hardware.
Any ideas ladies and gents??
|
|
Advertisement
|
|
|
|
|
afcouling
Newbie
|
30. December 2006 @ 07:23 |
Link to this message
|
Here's the Nero log from an ISO burned to a Verbatim (MCC) DVD at 16x, using USB 1.1 interface:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <TSSTcorp CD/DVDW SH-S162L>Version: LC02 - HA 1 TA 3 - 6.6.1.4
Adapter driver: <USB 1.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <MATSHITA CDRW/DVD UJDA740>Version: 1.03 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATCS04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA CDRW/DVD UJDA740 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA CDRW/DVD UJDA740 D: CDRom0
TSSTcorp CD/DVDW SH-S162L G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523696kB)
Free physical memory: 122MB (125948kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.12.2006
Burn DVD Image
13:40:56 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
13:40:56 #2 Text 0 File Reader.cpp, Line 124
Reader running
13:40:56 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-S162L running
13:40:56 #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
13:40:57 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286030 (508:00.30, 4464MB)
13:40:57 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
13:40:57 #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: TSSTcorp CD/DVDW SH-S162L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
13:40:57 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:40:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286031 (2286031) = #2286031/508:0.31
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286031 blocks [TSSTcorp CD/DVDW SH-S162L]
--------------------------------------------------------------
13:40:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [TSSTcorp CD/DVDW SH-S162L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681791488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286031 | lead-out | 1 | 0x41 | 0x00
13:40:57 #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
13:40:57 #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
13:40:57 #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
13:40:57 #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
13:40:57 #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
13:40:57 #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
13:40:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
13:40:58 #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
13:40:58 #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
13:40:58 #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:41:40 #21 Text 0 File Cdrdrv.cpp, Line 1200
13:41:40.050 - G: TSSTcorp CD/DVDW SH-S162L : Queue again later
15:41:44 #22 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-S162L> start writing Lead-Out at LBA 2286031 (22E1CFh), lenght 0 blocks
15:41:44 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:41:44 #24 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 2286015
15:42:09 #25 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
afcouling
Newbie
|
30. December 2006 @ 07:37 |
Link to this message
|
Here's the Nero log from an ISO burned to a Verbatim (MCC) DVD-R at 4x, using FireWire 400 interface:
Please note that I had to disconnect the drive to abort the burn process after it ceased to burn at about 30% complete.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <TSSTcorp CD/DVDW SH-S162L>Version: LC02 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IEEE 1394> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA CDRW/DVD UJDA740>Version: 1.03 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATCS04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA CDRW/DVD UJDA740 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA CDRW/DVD UJDA740 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523696kB)
Free physical memory: 199MB (203936kB)
Memory in use : 61
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.12.2006
Burn DVD Image
20:09:07 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
20:09:07 #2 Text 0 File Reader.cpp, Line 124
Reader running
20:09:07 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-S162L running
20:09:07 #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
20:09:07 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2276634 (505:55.09, 4446MB)
20:09:07 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
20:09:07 #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: TSSTcorp CD/DVDW SH-S162L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
20:09:07 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
20:09:07 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2276635 (2276635) = #2276635/505:55.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2276635 blocks [TSSTcorp CD/DVDW SH-S162L]
--------------------------------------------------------------
20:09:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [TSSTcorp CD/DVDW SH-S162L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4662548480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2276635 | lead-out | 1 | 0x41 | 0x00
20:09:07 #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
20:09:07 #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
20:09:07 #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
20:09:08 #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
20:09:08 #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
20:09:08 #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
20:09:08 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
20:09:08 #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
20:09:08 #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
20:09:08 #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20:09:25 #21 Text 0 File Cdrdrv.cpp, Line 1200
20:09:25.641 - E: TSSTcorp CD/DVDW SH-S162L : Queue again later
20:20:04 #22 SPTI -500 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x00) WinError(1235) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0C D9 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x09870000: Len x10000
0x00 00 01 BA 44 0C 1E F0 15 A7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 EE FE CE 8F 1D 61 F7 10 28
0x54 07 66 13 A0 B2 7C 26 8A 0D 81 81 99 92 55 20
20:20:04 #23 SPTI -500 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x00) WinError(1235) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0C D9 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04560600: Len x10000
0x00 00 01 BA 44 0C 1E F0 15 A7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 EE FE CE 8F 1D 61 F7 10 28
0x54 07 66 13 A0 B2 7C 26 8A 0D 81 81 99 92 55 20
20:20:04 #24 Text 0 File Mmc.cpp, Line 19507
Writer-Buffer for E: TSSTcorp CD/DVDW SH-S162L reduced to 32768Bytes
20:20:04 #25 SPTI -500 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x00) WinError(1235) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0C D9 00 00 00 10 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04560600: Len x8000
0x00 00 01 BA 44 0C 1E F0 15 A7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 EE FE CE 8F 1D 61 F7 10 28
0x54 07 66 13 A0 B2 7C 26 8A 0D 81 81 99 92 55 20
20:20:04 #26 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
E: TSSTcorp CD/DVDW SH-S162L
20:20:04 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
20:20:04 #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
20:20:05 #29 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 841983
20:20:05 #30 SPTI -600 File SCSIPassThrough.cpp, Line 289
CdRom1: SCSIStatus(x00) WinError(55) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x031f5400: Len x48
20:20:06 #31 CDR -600 File WriterStatus.cpp, Line 167
Device not available
E: TSSTcorp CD/DVDW SH-S162L
20:20:06 #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
20:20:07 #33 CDR -600 File WriterStatus.cpp, Line 172
Device not available
E: TSSTcorp CD/DVDW SH-S162L
20:20:07 #34 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession
20:20:07 #35 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
30. December 2006 @ 07:46 |
Link to this message
|
thread teleported to relevant forum.
i've never used Firewire myself so any info i could offer on that would only be copy/pasted from somewhere. I've always resisted the temptation to buy pre-built external burners, i just use Belkin USB2.0 enclosures with standard dvd burners. But anyway, as you've found USB1.1 is pretty pointless for anything even remotely strenuous. 16x won't have been sustained over USB1.1, there's a registry tweak that forces Nero to display the actual burn speed during the burn instead of the misleading speed it normally gives..
i'll dig out the info re the registry link if i can find it...
edit- haven't found it yet but here's more similar info here - http://forums.afterdawn.com/thread_jump.cfm/440932/2666129
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 30. December 2006 @ 07:51
|
|
afcouling
Newbie
|
30. December 2006 @ 08:06 |
Link to this message
|
Thanks creaky, interesting reading.
I have another log example here. Again, Verbatim media at 4x via FireWire:
1A23-[serial number removed]
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <TSSTcorp CD/DVDW SH-S162L>Version: LC02 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IEEE 1394> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA CDRW/DVD UJDA740>Version: 1.03 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATCS04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA CDRW/DVD UJDA740 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA CDRW/DVD UJDA740 D: CDRom0
TSSTcorp CD/DVDW SH-S162L E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523696kB)
Free physical memory: 181MB (185956kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.12.2006
Burn DVD Image
17:30:35 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
17:30:35 #2 Text 0 File Reader.cpp, Line 124
Reader running
17:30:35 #3 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-S162L running
17:30:35 #4 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
17:30:36 #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286014 (508:00.14, 4464MB)
17:30:36 #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
17:30:36 #7 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: TSSTcorp CD/DVDW SH-S162L, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
17:30:36 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:30:36 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286015 (2286015) = #2286015/508:0.15
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286015 blocks [TSSTcorp CD/DVDW SH-S162L]
--------------------------------------------------------------
17:30:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [TSSTcorp CD/DVDW SH-S162L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681758720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286015 | lead-out | 1 | 0x41 | 0x00
17:30:36 #11 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
17:30:36 #12 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:30:36 #13 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
17:30:36 #14 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
17:30:36 #15 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
17:30:36 #16 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
17:30:36 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
17:30:36 #18 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
17:30:36 #19 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
17:30:36 #20 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:30:53 #21 Text 0 File Cdrdrv.cpp, Line 1200
17:30:53.354 - E: TSSTcorp CD/DVDW SH-S162L : Queue again later
17:39:59 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 14 98 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0B 00 00 00 00 30 05
Buffer x03940000: Len x10000
0x00 00 01 BA 44 2A 14 C7 6D AD 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 08 85 D6 26 A0 D5 4B E4 D6
0x10 02 EA 2D 6A B4 A0 50 20 0C 67 0F 5C 84 AE 80
17:39:59 #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: TSSTcorp CD/DVDW SH-S162L
17:39:59 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
17:39:59 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
17:39:59 #26 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 1349631
17:39:59 #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 30. December 2006 @ 08:07
|
Moderator
|
30. December 2006 @ 08:12 |
Link to this message
|
i'm looking for firmware info on your burner at the moment....
edit- see if this helps, i've found newer firmware 'LC03' here dated Sept. 6, 2006 - http://www.lacie.com/download/drivers/SH-W162LLC03.exe
"DVD drive firmware LC03 improves LightScribe printing quality and fixes minor bugs".
Keep a note of this link for checking for future updates - http://www.lacie.com/support/drivers/index.htm
however from that webpage you have to select 'DVD' from the dropdown box entitled "Choose a product family"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 30. December 2006 @ 08:20
|
|
smooches
Junior Member
|
30. December 2006 @ 08:18 |
Link to this message
|
|
I dont know if this will help. I dont know how long you have had your external dvd burner but if you were thinking about trying a new dvd burner try MADDOG. I bought this external dvd burner yesterday. It has both a firewire port and a usb 2.0 port also. I never tried the firewire before and it worked wonderful. It was fast! Usb 1.1 is nowhere near fast enough for buring information. The transfer rate is too slow. This external burner was on sale at CompUSA for $79.99. Just a suggestion!
|
Moderator
|
30. December 2006 @ 08:24 |
Link to this message
|
|
only last week i plugged a cheapo USB2.0 PCI card into one of my olde worlde PC's as it's USB1.1 was unbearable for writing to a 1GB USB stick, now the transfer speed is amazing.
I'm hoping the firmware update in my previous reply helps the original poster's Firewire burns work correctly. If not this is why i don't like propietory external burners, i only use standard burners myself (obviously as long as the USB chipset in my USB2.0 enclosures works properly, which it does)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
afcouling
Newbie
|
30. December 2006 @ 09:34 |
Link to this message
|
|
Thanks creaky,
I already have the latest firmware (LC02), LC03 is for another model.
Still no solution. I am experimenting with other burners and other computers this evening.
I will try some other media brands tomorrow.
|
|
Advertisement
|
|
|
Moderator
|
30. December 2006 @ 09:57 |
Link to this message
|
|
doh that was lucky, my eyesight!. you have very good media there, it could be that burner just doesn't like them. Again this is why i use standard burners internally to the PC or in an enclosure.. :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|
