|
|
|
Problem with USB DVD-writer
|
|
|
tim_fug
Newbie
|
2. January 2007 @ 03:47 |
Link to this message
|
Hi,
I resently bought a 5.25" case from techsolo where I put in an old IDE Emprex DVD+- writer. After connection over USB 2.0 reading a CD/DVD works fine but I had major problems with writing.
first I tried a CD but did not work, Nero 6.6 tried to perform an SCSI operation. This happened with "Disk at once", finally I tried "Track at once" and it worked!?
Well with DVD's I could not choose "Track at once" so I updated Nero to 7.5 and it worked until the end of the dvd. After reaching 100% it took a sec and Nero displayed some errors:
14:38:12 #33 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
F: DVDRW IDE1008
14:38:12 #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
failed because a reset occured?
Anyone has an idear?
Here is the complete log file:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32
NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1
(Nero Express)
Recorder: <DVDRW IDE1008> Version: 0060 - HA 1 TA 1 - 7.5.1.1
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-K12D>Version: 1.20 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-K12D atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE1008 F: CDRom1
PIONEER DVD-RW DVR-K12D J: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 222MB (227516kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2007
ISO Zusammenstellung
14:37:51 #1 Text 0 File Isodoc.cpp, Line 6510
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
14:37:51 #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 72704KB of Memory
14:37:51 #3 Text 0 File Reader.cpp, Line 126
Reader running
14:37:51 #4 Text 0 File Writer.cpp, Line 123
Writer F: DVDRW IDE1008 running
14:37:51 #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
14:37:51 #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
14:37:51 #7 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2100831 (466:51.06, 4103MB)
14:37:51 #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO (enabled: CD)
14:37:51 #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: DVDRW IDE1008, Media type: DVD+R
Disc Manufacturer ID: DAXON, Media Type ID: AZ3, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
14:37:51 #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:37:51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [F: DVDRW IDE1008]
--------------------------------------------------------------
14:37:51 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [F: DVDRW IDE1008] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
2100224 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
2100224 | 2 | 0 | 0x41 | 608 | 2100224 | 0x00
2100224 | 2 | 1 | 0x41 | 608 | 2100224 | 0x00
2100832 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
14:37:51 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
14:37:51 #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
14:37:52 #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
14:37:52 #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
14:37:52 #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5.540 KB/s)
14:37:52 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #2100224
14:37:52 #19 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: DAXON...
Media type ID: AZ3
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 44 41 58 4F 4E - 00 00 00 41 5A 33 00 38 ...DAXON...AZ3.8
23 54 37 14 00 23 6F 00 - 7D 6A 17 19 0C 0C 0A 0B #T7..#o.}j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
14:37:52 #20 Text 0 File DVDR.cpp, Line 6724
Drive: DVDRW IDE1008
Book Type request [BTC]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
14:37:52 #21 CDR -1211 File DVDR.cpp, Line 6002
Book Type set to: DVD-ROM
14:37:52 #22 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 2100224
DVD high compatibility mode: No
14:38:02 #23 Text 0 File WriterStatus.cpp, Line 116
<F: DVDRW IDE1008> start writing Lead-Out at LBA 2100832 (200E60h), length 0 blocks
14:38:02 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:38:07 #25 SPTI -600 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x95 00 00 00 00 00 00 00 00 00 00 44
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x050a6600: Len x4
14:38:08 #26 SPTI -600 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x95 00 00 00 00 00 00 00 00 00 00 44
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x050a6600: Len x4
14:38:08 #27 CDR -600 File ThreadedTransferInterface.cpp, Line 1959
Device not available
F: DVDRW IDE1008
14:38:08 #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1959
Could not perform end of Disc-at-once
14:38:09 #29 SPTI -1114 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 80
14:38:09 #30 SPTI -1169 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80
14:38:10 #31 SPTI -600 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x95 00 00 00 00 00 00 00 00 00 00 44
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x050a6600: Len x4
14:38:12 #32 SPTI -600 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x95 00 00 00 00 00 00 00 00 00 00 44
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x050a6600: Len x4
14:38:12 #33 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
F: DVDRW IDE1008
14:38:12 #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
14:38:14 #35 SPTI -600 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0506ae00: Len x48
14:38:16 #36 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5.540 KB/s)
14:38:17 #37 SPTI -1114 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 00 00 80
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 21.04.2005 16:30:14 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks
Tim
|
|
laddyboy
AfterDawn Addict
|
2. January 2007 @ 09:11 |
Link to this message
|
Hi.
You have some things working against you here.
The Emprex burner is not among the best and in this case is fairly old. I don't believe it is supported any longer with regular firmware updates.
The Daxon media you're using is of very poor quality for the most part. It's best to use better quality media like Verbatim, Taiyo Yuden, and made in Japan labeled Fuji and Sony if you can and find it available.
I have no idea whether the external enclosure you're using is a good one or not. It's not one I'm familiar with.
The error you obtained could be from a communication error on the USB bus as a result of the external enclosure, bad USB cable, or something else. It might also be due to the media you're using.
The first thing is to try some different media and swap out the USB cable if you have a spare (I doubt it's the cable since you can read OK). Look for some 8X Sony or Verbatim media for the drive.
Edit: Added text below:
To eliminate Nero as the culprit, generate a image file with Nero or whatever authoring software you're using and then burn that image file with ImgBurn (free).
http://www.imgburn.com
The current version of Nero seems to be a good one and you might as well upgrade to it. Be sure to write down your Nero serial number before installing as well as running the Nero 7 Clean Tool.
http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html
Version 7.5.9.0A: http://ww2.nero.com/nero7/enu/nero7-up.php
This message has been edited since posting. Last time this message was edited on 2. January 2007 @ 09:16
|
|
tim_fug
Newbie
|
2. January 2007 @ 12:31 |
Link to this message
|
Hi laddyboy,
thanks a lot for your comments!
The Emprex is really old, and not really worth using in an USB case. but the DVD writer in my notebook broke and this was the cheapest alternative because I had the Emprex at home.
About the Daxon media I was little bit surprised myself because I bought them under another label. Well I will try better media.
I tried your last advice, create an image and burn it with an other program. And indeed it worked! Guess that means it is Nero's fault? Strange because I never had problems with Nero. Not with the Emprex.
On the 5.25" case it says "with cypress chip" I have no driver for it, maybe someone has an idea if I can get a driver?
Well at least I could empty my HD little bit. :D
Thanks a lot
Tim
|
|
Advertisement
|
|
|
|
laddyboy
AfterDawn Addict
|
2. January 2007 @ 12:43 |
Link to this message
|
Nero has always had a problem communicating with some external enclosures. The cause remains unknown as far as I know. You'll probably be OK if you burn with ImgBurn or another program. Very few companies make, brand, and sell their own media which is why we recommend so few brands. Verbatim makes and sells their own as does Taiyo Yuden, although usually available only online. We recommend MIJ labeled Fuji and Sony because they are from Taiyo Yuden. Maxell MIJ is OK as well.
|
|
