|
|
|
Session Fixation And Cannot Read DVD's
|
|
|
Balearic
Newbie
|
7. January 2007 @ 05:30 |
Link to this message
|
Hi there
New to the forum, so firstly hello!
Could you help me with a small problem that I have been getting. I wanted to make backups of some MP3 files, so I went out and purchased a Philips DVDR1660P1 (Firmware 1.6, latest) DVD writer drive and I am also running Nero 6.6.1.4 (as part of the Nero 6 Suite) - I'm using Logik DVD+R discs as well as Sony DVD-R discs.
Firstly I should say the drive seems to be able to read normal DVD's without any problem, and is very responsive. However when I put in one of the blank DVD's for writing, Nero reports "No Disc Inserted or drive not ready, please try again", and also it reports no disc present in My Computer.
Now the really weird thing is, every now and again when I put in it does work (less than 10% of the time), but when I try to record a disc even at low write speeds like 2x and 4x, it gives me a "session fixation error" - although I have managed one sucess out of probably two dozen attempts.
I have enclosed the Nero log in case it helps.
I would appreciate any suggestions on how to solve the problem as its driving me around the bend at the moment! :doh: All the best.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <PHILIPS DVDR1660P1> Version: P1.6 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS DVDR1660P1 >Version: P1.6 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-77BVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3802110A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVDR1660P1 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047992kB)
Free physical memory: 189MB (194432kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2007
ISO compilation
22:45:05 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE
22:45:05 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
22:45:05 #3 Text 0 File Reader.cpp, Line 124
Reader running
22:45:05 #4 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVDR1660P1 running
22:45:05 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
22:45:05 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
22:45:05 #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2239887 (497:45.12, 4374MB)
22:45:05 #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
22:45:05 #9 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: PHILIPS DVDR1660P1, Media type: DVD+R
22:45:05 #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:45:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2239888 (2239888) = #2239888/497:45.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2239888 blocks [PHILIPS DVDR1660P1]
--------------------------------------------------------------
22:45:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4587290624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2239888 | lead-out | 1 | 0x41 | 0x00
22:45:05 #13 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
22:45:05 #14 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
22:45:05 #15 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
22:45:05 #16 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
22:45:05 #17 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
22:45:05 #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3,324 KB/s)
22:45:05 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:45:05 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x04780600: Len x804
22:45:05 #21 Text 0 File DVDR.cpp, Line 6328
Drive: PHILIPS DVDR1660P1
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
22:45:05 #22 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: DVD-ROM
22:45:05 #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
22:45:11 #24 SPTI -1176 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
Buffer x04410000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
22:45:11 #25 CDR -1176 File Writer.cpp, Line 311
Session fixation error
D: PHILIPS DVDR1660P1
22:45:11 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:45:11 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
22:45:11 #28 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders
22:45:11 #29 Phase 129 File dlgbrnst.cpp, Line 1685
Generating DVD borders completed successfully
22:45:11 #30 Text 0 File DVDR.cpp, Line 6328
Drive: PHILIPS DVDR1660P1
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
22:45:11 #31 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 05:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 23/03/2006 17:15:58 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 23/03/2006 17:15:56 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 23/03/2006 17:00:28 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
laddyboy
AfterDawn Addict
|
7. January 2007 @ 05:56 |
Link to this message
|
Hi.
Quote:
Nero Version: 6.6.1.4
This is a buggy version of Nero. Uninstall, run the Nero 6 Clean Tool, and then install version 6.6.0.18 from the two links below:
Package 1: http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
Quote:
Physical memory : 1023MB (1047992kB)
Free physical memory: 189MB (194432kB)
Memory in use : 81 %
You have a lot of memory in use at the time of burning. Shutdown any unnecessary programs and don't multitask.
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 23/03/2006 17:15:58 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 23/03/2006 17:15:56 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 23/03/2006 17:00:28 (InCD4 driver for win NT/2K/XP)
The Nero InCD packet writing software has been known to interfere with burning. Unless you really need and use it, use the Nero InCD Clean Tool to remove it:
http://ww2.nero.com/nero6/eng/InCD_Clean_Tool.html
Accordig to the Philips site you have the latest firmware available for that burner P1.6.
http://www.storageupdates.philips.com/en/dvdrw.html
The Logik +R disks you're using are of poor quality. They are made by CMC Magnetics most of the time I think. It appears your burner firmware doesn't even recognize them which may be accounting for the errors. Try to use good quality media like Verbatim, Taiyo Yuden, and made in Japan labeled Fuji and Sony disks.
You might try increasing your burn speed to 4X.
You might also try uninstalling/resetting your burner with Device Manager as follows"
- Right click on My Computer and select Properties.
- Click the Hardware tab and the Device Manager button.
- Click the "+" symbol beside DVD/CD-ROM Drives.
- Right click on the name of your burner Philips DVDR1660P1 and select Uninstall.
- Click OK and restart your system.
Let us know if any of the above solves your problems.
Edit: Added text below:
Since you're burning an ISO image file, try using ImgBurn (free):
http://www.imgburn.com
This message has been edited since posting. Last time this message was edited on 7. January 2007 @ 06:01
|
|
Balearic
Newbie
|
7. January 2007 @ 06:01 |
Link to this message
|
Thank you for your quick reply. Before I read it I had another go this time using Philips DVD +RW discs and got the following error;
I will do as you say though and will let you know how it goes.
Thank you again! I appreciate it.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: <PHILIPS DVDR1660P1> Version: P1.5 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS DVDR1660P1 >Version: P1.5 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-77BVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3802110A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVDR1660P1 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047992kB)
Free physical memory: 334MB (342700kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.1.2007
ISO compilation
15:53:12 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:53:12 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
15:53:12 #3 Text 0 File Reader.cpp, Line 124
Reader running
15:53:12 #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
15:53:42 #5 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
15:53:42 #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2240111 (497:48.11, 4375MB)
15:53:42 #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
15:53:42 #8 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: PHILIPS DVDR1660P1, Media type: DVD+RW
15:53:42 #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:53:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2240112 (2240112) = #2240112/497:48.12
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2240112 blocks [PHILIPS DVDR1660P1]
--------------------------------------------------------------
15:53:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4587749376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2240112 | lead-out | 1 | 0x41 | 0x00
15:53:43 #12 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15:53:43 #13 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
15:53:43 #14 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
15:53:44 #15 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
15:53:44 #16 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
15:53:44 #17 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3,324 KB/s)
15:53:44 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:53:44 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x040e0200: Len x804
15:53:44 #20 Phase 98 File dlgbrnst.cpp, Line 1685
Start formatting disc before burning
15:53:50 #21 SPTI -1135 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 0C
15:53:50 #22 Phase 101 File dlgbrnst.cpp, Line 1685
Formatting disc failed
15:53:50 #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
15:53:50 #24 CDR -1135 File ThreadedTransferInterface.cpp, Line 1799
Write error
D: PHILIPS DVDR1660P1
15:53:50 #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once
15:53:50 #26 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 05:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 23/03/2006 17:15:58 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 23/03/2006 17:15:56 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 23/03/2006 17:00:28 (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
laddyboy
AfterDawn Addict
|
7. January 2007 @ 06:24 |
Link to this message
|
|
Hi.
Did you change the firmware on your drive? In your first post, it's version P1.6. In this latter post, it's P1.5.
|
|
Balearic
Newbie
|
7. January 2007 @ 06:27 |
Link to this message
|
|
Hi LaddyBoy
Yeah, I did. I thought maybe that was the issue so I downgraded it. Funnily enough, the problem I was having were discs were not reconised does seem to have gone away as a result.
I will keep it at this version for now and if the problems persist will try and upgrade it again.
Thanks again for your help!
|
AfterDawn Addict
|
7. January 2007 @ 07:16 |
Link to this message
|
|
|
Balearic
Newbie
|
7. January 2007 @ 07:49 |
Link to this message
|
Quote:
Nero Version: 6.6.1.4
This is a buggy version of Nero. Uninstall, run the Nero 6 Clean Tool, and then install version 6.6.0.18 from the two links below:
<snip>
Hi Laddyboy
Just followed your instructions. I used the clean tools and then reloaded Nero 6 without InCD and installed the patches you recommended.
Also I reinstalled the DVD drive as per your instructions.
Unfortunetly it continues not to work, although I have had a single sucessful copy yesterday. Do you think the drive maybe faulty all the same?
Here is the log; Thank you again for your help!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <PHILIPS DVDR1660P1> Version: P1.6 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PHILIPS DVDR1660P1 >Version: P1.6 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600AB-77BVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3802110A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PHILIPS DVDR1660P1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVDR1660P1 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047992kB)
Free physical memory: 534MB (547088kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.1.2007
ISO compilation
17:38:42 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE
17:38:43 #2 Text 0 File Reader.cpp, Line 127
Reader running
17:38:43 #3 Text 0 File Writer.cpp, Line 122
Writer PHILIPS DVDR1660P1 running
17:38:43 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
17:38:43 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
17:38:44 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1348751 (299:43.26, 2634MB)
17:38:44 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
17:38:44 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: PHILIPS DVDR1660P1, Media type: DVD+RW
17:38:44 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:38:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1348752 (1348752) = #1348752/299:43.27
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1348752 blocks [PHILIPS DVDR1660P1]
--------------------------------------------------------------
17:38:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [PHILIPS DVDR1660P1] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2762244096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1348752 | lead-out | 1 | 0x41 | 0x00
17:38:44 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
17:39:56 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
17:39:56 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
17:39:56 #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
17:39:56 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:44:28 #17 Text 0 File WriterStatus.cpp, Line 116
<PHILIPS DVDR1660P1 > start writing Lead-Out at LBA 1348752 (149490h), lenght 0 blocks
17:44:28 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
17:44:28 #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 7.2x (10,054 KB/s)
17:44:28 #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
17:44:28 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:44:28 #22 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03AF6600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
17:44:28 #23 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning
17:44:38 #24 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
17:44:38 #25 Phase 101 File dlgbrnst.cpp, Line 1832
Formatting disc failed
17:44:38 #26 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
17:44:38 #27 CDR -1135 File ThreadedTransferInterface.cpp, Line 1778
Write error
17:44:38 #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
17:44:38 #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 05:12:26 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 05:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 7. January 2007 @ 07:50
|
|
Advertisement
|
|
|
|
laddyboy
AfterDawn Addict
|
7. January 2007 @ 09:35 |
Link to this message
|
Hi.
It could be that your burner is bad or that it isn't caring for the media you're feeding it. The Nero log is not indicating the actual manufacturer of the media you're using and that's never a good sign and indicates something is wrong.
I would like you to try burning the ISO with ImgBurn. It's a free program. If that works, there's a problem with Nero and your burner. If it doesn't, it adds evidence that your burner is faulty. Don't use RW media with ImgBurn. See if it'll burn a -R or +R disk.
http://www.imgburn.com
The only way to really test to see if the burner is bad or if it's a problem with your system is to install the burner in another system to see if it works there or not. If it doesn't, it's likely bad. If it does, there''s something in your system causing the problem that needs identifying.
|
|
