Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Tuesday 10.3.2026 / 16:15
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > software specific discussion > nero discussion > interal target failure & could not perform end of disc-at-once
Show topics
 
Forums
Forums
Interal Target Failure & Could not perform end of Disc-at-once
  Jump to:
 
Posted Message
brownc2
Newbie
_ 		7. January 2007 @ 17:24 _ Link to this message    Send private message to this user   
Hi!
Never had this problem until recently. Log is pasted below. Any suggestions?

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <ASUS DRW-0402P/D> Version: 1.05 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp CDRWDVD TS-H492C>Version: DE02 - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : ASUS DRW-0402P/D atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDRWDVD TS-H492C atapi Port 0 ID 1 DMA: Off
DiskPeripheral : HDS728080PLA380 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
ASUS DRW-0402P/D D: CDRom0
TSSTcorp CDRWDVD TS-H492C E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 75MB (76888kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.1.2007
UDF/ISO compilation
8:16:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

8:16:51 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

8:16:51 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:16:51 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

8:16:51 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

8:16:51 PM #6 Text 0 File Writer.cpp, Line 122
Writer ASUS DRW-0402P/D running

8:16:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:16:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:16:51 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

8:17:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1439759 (319:56.59, 2812MB)

8:17:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:17:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: ASUS DRW-0402P/D, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

8:17:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

8:17:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1439760 (1439760) = #1439760/319:56.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1439760 blocks [ASUS DRW-0402P/D]
--------------------------------------------------------------

8:17:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [ASUS DRW-0402P/D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2948628480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1439760 | lead-out | 1 | 0x41 | 0x00

8:17:11 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:17:11 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

8:17:11 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:17:11 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

8:17:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:17:11 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

8:17:11 PM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

8:17:19 PM #23 Text 0 File Cdrdrv.cpp, Line 1288
20:17:19.234 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:07 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
20:23:07.437 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:07 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
20:23:07.593 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:07 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
20:23:07.640 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:09 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
20:23:09.062 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:09 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
20:23:09.125 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:09 PM #29 Text 0 File Cdrdrv.cpp, Line 1288
20:23:09.171 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:09 PM #30 Text 0 File Cdrdrv.cpp, Line 1288
20:23:09.437 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:09 PM #31 Text 0 File Cdrdrv.cpp, Line 1288
20:23:09.484 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:09 PM #32 Text 0 File Cdrdrv.cpp, Line 1288
20:23:09.765 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:09 PM #33 Text 0 File Cdrdrv.cpp, Line 1288
20:23:09.843 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:10 PM #34 Text 0 File Cdrdrv.cpp, Line 1288
20:23:10.359 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:10 PM #35 Text 0 File Cdrdrv.cpp, Line 1288
20:23:10.515 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:10 PM #36 Text 0 File Cdrdrv.cpp, Line 1288
20:23:10.578 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:51 PM #37 Text 0 File Cdrdrv.cpp, Line 1288
20:23:51.781 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:51 PM #38 Text 0 File Cdrdrv.cpp, Line 1288
20:23:51.937 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:51 PM #39 Text 0 File Cdrdrv.cpp, Line 1288
20:23:51.984 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:53 PM #40 Text 0 File Cdrdrv.cpp, Line 1288
20:23:53.812 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:23:53 PM #41 Text 0 File Cdrdrv.cpp, Line 1288
20:23:53.859 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:24:45 PM #42 Text 0 File Cdrdrv.cpp, Line 1288
20:24:45.296 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:24:45 PM #43 Text 0 File Cdrdrv.cpp, Line 1288
20:24:45.421 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:24:45 PM #44 Text 0 File Cdrdrv.cpp, Line 1288
20:24:45.468 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:25:45 PM #45 Text 0 File Cdrdrv.cpp, Line 1288
20:25:45.890 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:25:46 PM #46 Text 0 File Cdrdrv.cpp, Line 1288
20:25:46.000 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:25:46 PM #47 Text 0 File Cdrdrv.cpp, Line 1288
20:25:46.062 - ASUS DRW-0402P/D\H0 T0 : Queue again later

8:26:40 PM #48 Text 0 File WriterStatus.cpp, Line 116
<ASUS DRW-0402P/D > start writing Lead-Out at LBA 1439760 (15F810h), lenght 0 blocks

8:26:40 PM #49 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:26:49 PM #50 SCSI -1061 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD6
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD6

8:26:49 PM #51 CDR -1061 File ThreadedTransferInterface.cpp, Line 1916
Internal target failure

8:26:49 PM #52 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916
Could not perform end of Disc-at-once

8:26:49 PM #53 SCSI -1122 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x57 0x00

8:26:49 PM #54 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

8:26:51 PM #55 CDR -1122 File WriterStatus.cpp, Line 167
Unable to recover TOC

8:26:51 PM #56 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

8:26:51 PM #57 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 10:34:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[ + quote]
Advertisement
_ 		__
binkie7
Moderator
_ 		7. January 2007 @ 18:29 _ Link to this message    Send private message to this user   
Hi brownc2
Here's a few suggestions:

Recorder: <ASUS DRW-0402P/D> Version: 1.05
Older drive but there is more recent firmware version for it from 2004 -
1.07.

CdRomPeripheral : TSSTcorp CDRWDVD TS-H492C atapi Port 0 ID 1 DMA: Off
Turn DMA back on for this drive. Here's a guide.

Physical memory : 502MB
Free physical memory: 75MB
Memory in use : 85 %
Alot of memory in use. No multi tasking and close unneeded programs.
Do a disc cleanup, defrag and run a anti virus & spyware scan too if you haven't very recently.

File 'Drivers\InCDfs.SYS
Nero's InCD can sometimes cause problems. If you're not using it uninstall it and run the Clean Tool.

Give those a go and let us know.
[ + quote]


Forum Rules
Do this before posting
Do not click this link...
brownc2
Newbie
_ 		7. January 2007 @ 19:04 _ Link to this message    Send private message to this user   
Tried to update firmware on ASUS DRW-0402P/D to version 1.07: It fails - says failed to load binary file ?????

Followed the guide for the DMA - removed and it redetected.

Currently running defrag and disk clean-up

Any suggestions on why it won't update to 1.07?
[ + quote]
brownc2
Newbie
_ 		8. January 2007 @ 02:25 _ Link to this message    Send private message to this user   
Tried to update firmware on ASUS DRW-0402P/D to version 1.07: It fails - says failed to load binary file ?????

Followed the guide for the DMA - removed and it redetected.

Defrag and disk clean-up are complete

Could it be a media issue? I usually use Maxell but purchased Memorex this time. I have used both in the past and they both worked. I noticed in the log that it says that my media is "unknown".

My burner burns CD's fine, just not DVD's.

Any other suggestions? See latest log.


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <ASUS DRW-0402P/D> Version: 1.05 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS DRW-0402P/D >Version: 1.05 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : ASUS DRW-0402P/D atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDRWDVD TS-H492C atapi Port 0 ID 1 DMA: Off
DiskPeripheral : HDS728080PLA380 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
ASUS DRW-0402P/D D: CDRom0
TSSTcorp CDRWDVD TS-H492C E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 88MB (90128kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.1.2007
UDF/ISO compilation
6:56:21 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

6:56:21 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

6:56:21 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

6:56:21 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

6:56:21 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

6:56:21 AM #6 Text 0 File Writer.cpp, Line 122
Writer ASUS DRW-0402P/D running

6:56:21 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:56:21 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

6:56:21 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

6:56:43 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1439759 (319:56.59, 2812MB)

6:56:43 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

6:56:43 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: ASUS DRW-0402P/D, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

6:56:43 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

6:56:43 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1439760 (1439760) = #1439760/319:56.60
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1439760 blocks [ASUS DRW-0402P/D]
--------------------------------------------------------------

6:56:43 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [ASUS DRW-0402P/D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2948628480, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1439760 | lead-out | 1 | 0x41 | 0x00

6:56:43 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

6:56:43 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

6:56:43 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

6:56:43 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

6:56:43 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:56:43 AM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

6:56:43 AM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

6:56:46 AM #23 Text 0 File Cdrdrv.cpp, Line 1288
06:56:46.078 - ASUS DRW-0402P/D\H0 T0 : Queue again later

6:57:00 AM #24 Text 0 File Cdrdrv.cpp, Line 1288
06:57:00.421 - ASUS DRW-0402P/D\H0 T0 : Queue again later

7:05:36 AM #25 Text 0 File WriterStatus.cpp, Line 116
<ASUS DRW-0402P/D > start writing Lead-Out at LBA 1439760 (15F810h), lenght 0 blocks

7:05:36 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:05:44 AM #27 SCSI -1061 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD6
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x44 0xD6

7:05:44 AM #28 CDR -1061 File ThreadedTransferInterface.cpp, Line 1916
Internal target failure

7:05:44 AM #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916
Could not perform end of Disc-at-once

7:05:44 AM #30 SCSI -1122 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03B05E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x57 0x00

7:05:44 AM #31 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

7:05:46 AM #32 CDR -1061 File WriterStatus.cpp, Line 167
Internal target failure

7:05:46 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

7:05:47 AM #34 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 10:34:04 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[ + quote]
binkie7
Moderator
_ 		8. January 2007 @ 14:56 _ Link to this message    Send private message to this user   
Could be a media issue - from the log the disc are fully recognized:
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
Can always try another brand like Verbatim - look for 8x for this drive.

But you're still getting an internal target failure & might also be why be you're getting the error updating the firmware.

2 causes for that can be the drive itself and/or the ide cable.
And the one drive is still in PIO even after reinstalling it.

So do you have another pc you can try this drive in? Best way to test these.
It's an older drive so your best bet may be a new one w/ a new cable.
Both are pretty cheap now.

But you also still have alot of memory in use 88% this time.
So may be playing into it too.
Look in the system tray (bottom right hand corner) and close all unneeded programs there too.

Did you do a virus and spyware scan?
[ + quote]


Forum Rules
Do this before posting
Do not click this link...
brownc2
Newbie
_ 		8. January 2007 @ 16:11 _ Link to this message    Send private message to this user   
Bought some new media (DVD-R HP brand) and things are working again.

Yes - I also did a virus scan and a spyware scan.

Thanks for you help. This forum is great and I will use again!
[ + quote]
Advertisement
_ 		__
 
_
binkie7
Moderator
_ 		8. January 2007 @ 16:20 _ Link to this message    Send private message to this user   
You're welcome brownc2 :)

I'm glad it turned out to be the simplest thing!

Stick around - lots to learn and can always use another helping hand
[ + quote]


Forum Rules
Do this before posting
Do not click this link...
afterdawn.com > forums > software specific discussion > nero discussion > interal target failure & could not perform end of disc-at-once
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2026 by AfterDawn Ltd.

  IDG TechNetwork