|
|
|
Unusual DVD Burn Problem
|
|
|
pg23
Newbie
|
26. January 2007 @ 16:34 |
Link to this message
|
Well a week ago, I was messing around with my graphics card drivers to install an old Driver to play an old program. I have a geforce 6800ultra. Now I gave up and decided to go back to the original driver. Later I decided to burn a backup of a movie (4.3gb), then about 5 minutes into the burn, the dvd drive spits out the dvd and the burn fails. I'm using Nero 7 to burn too. I can burn stuff on dvd that are under 2gb or something. I dunno, it mightve been a freak occurance. I continue burning various things over 4 gigs or 3gigs and they all fail. I wasted a lot of dvd's fixing things. I tried reinstalling Nero, I tried updating my DVD driver, I tried restarting. None seem to work.
Also, previously burn, like a day before, I used a different brand of DVD which I just so happen to use the last of. Now i'm using 4x compUSA brand. A big money saving moment. lol and its a pack of 100.
I tried burning on my laptop with the same DVD and it burns succesfully. But I think it was under 3gigs. I'm going to test out burn something over 3gigs.
Here is the Nero Burn log for the failed attempts.
sds
ds
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1
(Nero Express)
Recorder: <PLEXTOR DVDR PX-712A> Version: 1.09 - HA 1 TA 3 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PLEXTOR DVDR PX-712A >Version: 1.09 - HA 1 TA 3 - 7.7.5.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR DVDR PX-712A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD360GD-00FNA0 35.0 viasraid Port 2 ID 0 DMA: Off
DiskPeripheral : ST3120026AS 3.18 viasraid Port 2 ID 2 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR DVDR PX-712A F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 522MB (535396kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.1.2007
Burn DVD Image
8:41:00 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
8:41:00 PM #2 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media
8:41:00 PM #3 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286039 (508:00.39, 4464MB)
8:41:00 PM #4 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
8:41:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: PLEXTOR DVDR PX-712A, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 193
8:41:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:41:00 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286040 (2286040) = #2286040/508:0.40
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285890 blocks [F: PLEXTOR DVDR PX-712A]
--------------------------------------------------------------
8:41:00 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [F: PLEXTOR DVDR PX-712A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681809920, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2286040 | 2285890 | 0x00
0 | 1 | 1 | 0x41 | 2286040 | 2285890 | 0x00
2286040 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
8:41:00 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:41:00 PM #10 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 4x (5,540 KB/s)
8:41:00 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:41:00 PM #12 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode
8:41:00 PM #13 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes
8:41:00 PM #14 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:52:02 PM #15 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x07
CDB Data: 0x2A 00 00 19 E0 C0 00 00 20 00 00 00
Sense Area: 0xF0 00 03 00 19 D4 70 0A 00 00 00 00 0C 07
Buffer x09a99640: Len x10000
0x00 00 01 BA 45 62 3F 37 8C 13 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 34 4B 20 5C 42 1F 00 00 00
0x01 11 42 93 4E 56 B2 76 C6 8E 19 A1 41 4A 38 F5
8:52:02 PM #16 CDR -1135 File Writer.cpp, Line 301
Write error
F: PLEXTOR DVDR PX-712A
8:52:02 PM #17 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was 1695935
8:52:02 PM #18 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 4x (5,540 KB/s)
8:52:02 PM #19 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:52:10 PM #20 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed
8:52:10 PM #21 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
All the help would be greatly appreciated. I seriously hate wasting so many dvds. :(
This message has been edited since posting. Last time this message was edited on 27. January 2007 @ 13:51
|
AfterDawn Addict
|
27. January 2007 @ 13:17 |
Link to this message
|
I haven't read many nero7 logs,but here goes:
1) Use the pencil/note pad on the right corner of your opening post.This is the edit icon.Use it to erase your serial # starting with 1c82-xxxx-xxxx-xxxx-xxxx-xxxx
2)=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR DVDR PX-712A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD360GD-00FNA0 35.0 viasraid Port 2 ID 0 DMA: Off
DiskPeripheral : ST3120026AS 3.18 viasraid Port 2 ID 2 DMA: Off
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off
Your DMA's are thrown into Pio mode-no good. Especially your Harddrives. I'm unfamiliar about the RAID. Here's a guide.
http://www.dvdplusvideo.com/dvdguide005.html
You basically go into device manager under IDE-ATA/Atapi-locate primary controller/disable drivers/reboot. Do the same to the other controllers-1 controller at a time.
3) If you uninstall Nero,chances are there's leftover remnants.Here's the Nero cleantool links.
http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html
Uninstall Nero,run Nero cleantool 7,then download Nero again-leaving out the incd packets. I'd wait because I don't notice any remnants in your log.
4) Looks like the Firmware version of 1.09 is the latest,being around 9 months old. Here's a link in case there's a newer version:
http://forum.rpc1.org/dl_firmware.php?download_id=1826
5) Now i'm using 4x compUSA brand.
Disc Manufacturer: AML -
Beware of store brand named media like staple's,Office max,CompUSA,etc. There's no number after AML. Office Depot's house brand is the only exception. That code should be AML-01 or AML-02 or something like that. This may be a firmware issue. The firmware may not be programmed to handle that media-which is a case with low quality media and the manufacturers not allowing their drives to burn them.
Get some quality verbatim or taiyo yuden. Locally,when verbatim goes on sale at bestbuy,office max,office depot- well under 30 cents each maxxxx!
Crap media can cause many headaches. Bad playback,coasters,too many coasters-then it throws your dma's out of whack.When windows gets 5 or so burn errors,it throws the DMA's into Pio mode for safety purposes. They also don't handle compression as well as quality media. Higher chance for uneven dye. Then there's the longevity factor as well and also those small PIE and PIF errors will add up causing CRC errors in case your successful backups need re-ripped later on. These low quality manufacturers: AML,UME,etc have low quality standards.
If problems occuring on the end of your backups,reduce your backup target size. Max target size is 4.38 gbs. Reduce this to 4.0 gbs-let us know what programs you are using. Nero recode2 and DVD Shrink are easy to change that target size. It'll increase compression,but keeps you away from the infected area that's on the outer edge of the disc-uneven dye?
Drives will have a harder time with low quality media. The quality verbatim or ty will prevent a lot of issues now and later on.
HP a1118x-b/athlon 64-3300+/BenQ 1650 BCDC/LG 8163B/Modded Wii/Epson-R300 and Ty Watershields!!! |
|
