|
|
|
nero and vista drm? or human error????
|
|
|
jzncarter
Newbie
|
3. February 2007 @ 03:52 |
Link to this message
|
hi guys am looking for some help, have been using Nero no probs for couple of years now, i upgraded to vista, and had to find a version that was compatible and have done so, however when i try to burn 'certain' iso images i get error message that dvd drive has reset.. i was wondering if anyone knows if this a software fault or part of the dreaded DRM protection in vista?? .. i know nothing about DRM!!!.. am using toshiba sdr 5472c usb external dvdrw dual layer.. gives this message....
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <TOSHIBA CD/DVDW SDR5472C>Version: TU01 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA CD/DVDW SDR5472C>Version: TU01 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <USB 2.0> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252S D: CDRom0
TOSHIBA CD/DVDW SDR5472C E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 510MB (523072kB)
Free physical memory: 267MB (274356kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.2.2007
ISO compilation
14:03:22 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
14:03:24 #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
14:03:24 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
14:03:24 #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
14:03:25 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 757055 (168:14.05, 1478MB)
14:03:25 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
14:03:25 #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: TOSHIBA CD/DVDW SDR5472C, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
14:03:25 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:03:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 757056 (757056) = #757056/168:14.6
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 757056 blocks [E: TOSHIBA CD/DVDW SDR5472C]
--------------------------------------------------------------
14:03:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: TOSHIBA CD/DVDW SDR5472C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1550450688, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 757056 | 0 | 0x00
0 | 1 | 1 | 0x41 | 757056 | 0 | 0x00
757056 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
14:03:45 #11 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Access is denied.
14:03:45 #12 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
14:03:55 #13 Text 0 File SCSIPTICommands.cpp, Line 231
Error on LockVolume: Access is denied.
14:03:55 #14 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
14:03:55 #15 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
14:03:55 #16 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
14:03:55 #17 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 12x (16,620 KB/s)
14:03:56 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
14:03:56 #19 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession
14:03:56 #20 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes
14:03:56 #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
14:04:15 #22 Text 0 File Cdrdrv.cpp, Line 1292
14:04:15.551 - E: TOSHIBA CD/DVDW SDR5472C : Queue again later
14:04:19 #23 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 01 C0 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x221203c0: Len x10000
0x37 D2 90 76 61 0A 58 6E 63 94 01 2D 6A 5B 6B 60
0x11 E5 2E 60 05 20 76 A3 06 D3 3C 05 39 9D 56 8E
0xBD 30 81 59 4A BA 71 9C 1C D2 09 F8 C7 B3 0D 7E
14:04:19 #24 CDR -600 File Writer.cpp, Line 299
Device not available
E: TOSHIBA CD/DVDW SDR5472C
14:04:19 #25 Text 0 File DVDR.cpp, Line 3434
EndDAO: Last written address was 447
14:04:39 #26 Phase 133 File dlgbrnst.cpp, Line 1746
Writing short lead-out
14:04:39 #27 CDR -1114 File WriterStatus.cpp, Line 162
Reset occurred
E: TOSHIBA CD/DVDW SDR5472C
14:04:39 #28 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
14:04:40 #29 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 12x (16,620 KB/s)
14:04:42 #30 Text 0 File SCSIPTICommands.cpp, Line 277
SPTI - Error on DismountVolue: The device is not ready.
14:04:45 #31 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
14:04:45 #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 02/11/2006 09:50:35
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
This message has been edited since posting. Last time this message was edited on 3. February 2007 @ 04:08
|
|
Advertisement
|
|
|
|
|
laddyboy
AfterDawn Addict
|
3. February 2007 @ 07:22 |
Link to this message
|
Hello.
There's a newer firmware for yout burner, TU02, available.
http://www.toshiba.de/speichermedien/pro..._EFTU02_WIN.zip
Quote:
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
It appears you're writing a multisession disk. Is that what you intended?
Your other drives aren't showing up in the Nero log. What type of controller are you using, IDE/SATA/RAID?
You're probably burning too fast at 12X, especially with an external burner. Try 4X.
It seems to be a communication problem. Whether the problem is occurring on the USB bus or whatever internal bus you're using reamins to be determined. You might want to try another USB cable and port if one is handy.
Try outputting an image file from your authoring software and then burn that image file with ImgBurn (free).
http://www.imgburn.com
Let us know how you make out.
|
|
Saltgrass
Senior Member
|
3. February 2007 @ 10:05 |
Link to this message
|
Looks like your log is for XP, do you have a new one?
Maybe you should go the the 7.7.5.1 version, it had some bug fixes for Vista.
There may be other reasons why you show Windows XP 5.1, like perhaps you upgraded from XP to Vista, or the newer Nero picked up on the Vista number. I suppose we will find out as more logs start to show up.
Nero 7 v7.10.1.0
P4 2.4GHz 1 Gig RAM
NEC ND3550A DVD Burner
This message has been edited since posting. Last time this message was edited on 3. February 2007 @ 13:19
|
AfterDawn Addict
|
3. February 2007 @ 12:56 |
Link to this message
|
This is the 2nd log I have seen, using Vista where DMA has not been shown...as in a normal Windows history log.
Taken from normal Windows log
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : ST9808210A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
This message has been edited since posting. Last time this message was edited on 3. February 2007 @ 12:58
|
|
jzncarter
Newbie
|
7. February 2007 @ 01:12 |
Link to this message
|
thanks guys, image burn worked a treat, i didnt upgrade, was a clean install, sometimes Nero will work sometimes my writers refuse! im using ide.. will imageburn do kvcd's? .. i am using a Nero lite version, maybe i need to do a proper install, or maybe i have pc issues!!
|
|
Advertisement
|
|
|
|
laddyboy
AfterDawn Addict
|
7. February 2007 @ 06:46 |
Link to this message
|
I have no experience with kvcd, but if Nero will make an image file, imgburn will likely burn it. Maybe someone else knows for sure
|
|
