|
completely formatting a computer.
|
|
Member
|
10. February 2007 @ 04:11 |
Link to this message
|
|
i have question about something i really should know already, but i am getting a used PC for free that is beaten down and slow due to programs, virus (possibly) missing/corrupted files, and just junk. i am looking to completely reinstall windows XP, and wipe out EVERYTHING. i have installed Windows XP before, but always end up with some/most of the old files still on there. what am i doing wrong? i want everything that is on there gone, and a complete fresh install of windows XP. any help is appreciated. thanks.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
10. February 2007 @ 04:52 |
Link to this message
|
Originally posted by hayden58:
i have question about something i really should know already, but i am getting a used PC for free that is beaten down and slow due to programs, virus (possibly) missing/corrupted files, and just junk. i am looking to completely reinstall windows XP, and wipe out EVERYTHING. i have installed Windows XP before, but always end up with some/most of the old files still on there. what am i doing wrong? i want everything that is on there gone, and a complete fresh install of windows XP. any help is appreciated. thanks.
There are a couple of ways, actually. The old fdisk with a bootup disk, but I don't recommend that.
Now, if you are trying to install XP from the CD, getting rid of what is on the hard drive is easy. When XP gets to the point it asks you where you want it to install, you click on the partition, or drive, if there is only one partition, and select DELETE partition, or something to that affect.
Delete it. You will have to go through about 3 steps to do it, but eventually it will delete it. Now, you want to install it on that partition or drive, so you select it. It will ask you if you want to create a partition(s), so you click yes.
It will then ask you how you want to format it. Select NTFS quick. Once it formats, away you go.
People who have trouble with XP tend to try to repair what they have, or install over what they have already. I NEVER do either of those methods, because it leaves artifacts from the previous install.
A complete, clean install is the only way to go.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
Member
|
10. February 2007 @ 06:38 |
Link to this message
|
|
any more details you can provide to ensure i do a complete wipe out of everything on there, instead of another install? it seems when i have done it in the past i end up with the old files still showing on there. i dont know what im not doing quite right.
|
|
l2aw
Junior Member
|
10. February 2007 @ 07:44 |
Link to this message
|
|
Formatting would mean you need to setup your lan connection settings again, and God knows what other stuff.
I desperatly want to format my pc thoroughly. Like.. not right click C drive and format :S
Plus.. when I format my pc, I'll have to reinstall windows. Right now its genuine.. but what do i do later on?
|
Member
|
10. February 2007 @ 08:03 |
Link to this message
|
|
i dont care what has to be reset, because its not my computer previously, its being given to me, so teh previous setting will not matter. plus i will only be using dial up once in awhile on it. it wont be doing alot of internet.
|
AfterDawn Addict
|
10. February 2007 @ 08:17 |
Link to this message
|
Originally posted by hayden58:
any more details you can provide to ensure i do a complete wipe out of everything on there, instead of another install? it seems when i have done it in the past i end up with the old files still showing on there. i dont know what im not doing quite right.
Doing it the way I outlined in my other post, will wipe out everything. No more details needed, except if there is more than one partition, you can wipe out those too, by deleting those partitions at the install window.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
Member
|
10. February 2007 @ 09:44 |
Link to this message
|
|
so it sounds like the key here to to be sure to delete the existing partition? ill be sure to do that. anything else i should know? bye teh way thanks alot for your help and quick response.
|
AfterDawn Addict
|
10. February 2007 @ 13:51 |
Link to this message
|
Originally posted by hayden58:
so it sounds like the key here to to be sure to delete the existing partition? ill be sure to do that. anything else i should know? bye teh way thanks alot for your help and quick response.
You are welcome, and there isn't anything else that you need. Good luck to you, and let us know how it goes.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
Member
|
12. February 2007 @ 03:49 |
Link to this message
|
|
well its monday, and i have attempted to do exactly what you said and by all accounts appear to have failed. i was at the installation part where you hit D to delete the existing partion, and it wouldnt let me. is said something about the partion containing files needed to perform the Xp installation, or something along those lines.
|
AfterDawn Addict
|
12. February 2007 @ 06:53 |
Link to this message
|
Originally posted by hayden58:
well its monday, and i have attempted to do exactly what you said and by all accounts appear to have failed. i was at the installation part where you hit D to delete the existing partion, and it wouldnt let me. is said something about the partion containing files needed to perform the Xp installation, or something along those lines.
I don't know why that would happen. I don't know what to tell you.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
Member
|
12. February 2007 @ 07:11 |
Link to this message
|
|
maybe i didnt have it set correctly to "boot from disk" how exactly do i unsure that i did that correct? could you walk me through it?
|
|
Auslander
AfterDawn Addict
|
12. February 2007 @ 08:41 |
Link to this message
|
|
it's my advice not to do the quick ntfs format, but instead the full-time format, as it does a better job. this *could* correct your problem.
This message has been edited since posting. Last time this message was edited on 12. February 2007 @ 08:42
|
Member
|
12. February 2007 @ 09:24 |
Link to this message
|
|
i did the full format, not the quick one, and it still did not delete the stuff that was previously on the HD (a few files) etc....and what i was trying to avoid was the constant "this computer has recovered from a serious error" and after installing windows, that was the FIRST thing that came up. how do i set it to boot from CD? to make sure im doing that right? is that part of the reason it wouldnt let me delete the current partition? if i maybe had that wrong? i kep finding stuff with searches on the net, but its all different, and i dont know what to believe.
|
Member
|
12. February 2007 @ 09:37 |
Link to this message
|
i think i figured out why i couldnt delete the current partition:
Quote:
This part is important: do NOT run the Windows installation from Windows itself. Shut down first, and then boot up the machine from CD. My Dell has a little message as it's booting up that says "Press F12 to boot from CD," so that's what I did. If you're not sure how to boot from CD, check your PC's user guide for more info.
The reason why booting from CD is important is because we're going to delete the C: drive partition where Windows is installed and re-format it. You can't do this if Windows booted from C:, because it can't delete the partition from which it is running.
You CAN install Windows without deleting the partition and formatting, but that means all your program files and other riff-raff that's collected on your C: drive will still be there when you're done, just taking up unnecessary space. That's not the point of all this. Be sure to boot from CD.
looks like i have to figure out how to be sure i boto from cd.....i hear hit F12 from this guy, or change my bios, i just dont know how to do it, everyone says something different.
|
AfterDawn Addict
|
12. February 2007 @ 13:24 |
Link to this message
|
Originally posted by Auslander:
it's my advice not to do the quick ntfs format, but instead the full-time format, as it does a better job. this *could* correct your problem.
Auslander, he can't delete the partition, so he isn't going to be able to format it from the point that he is installing XP.
I just found out why. He never got to that screen. :(
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
This message has been edited since posting. Last time this message was edited on 12. February 2007 @ 14:05
|
AfterDawn Addict
|
12. February 2007 @ 13:28 |
Link to this message
|
Quote:
i think i figured out why i couldnt delete the current partition:
[quote]This part is important: do NOT run the Windows installation from Windows itself. Shut down first, and then boot up the machine from CD. My Dell has a little message as it's booting up that says "Press F12 to boot from CD," so that's what I did. If you're not sure how to boot from CD, check your PC's user guide for more info.
The reason why booting from CD is important is because we're going to delete the C: drive partition where Windows is installed and re-format it. You can't do this if Windows booted from C:, because it can't delete the partition from which it is running.
You CAN install Windows without deleting the partition and formatting, but that means all your program files and other riff-raff that's collected on your C: drive will still be there when you're done, just taking up unnecessary space. That's not the point of all this. Be sure to boot from CD.
looks like i have to figure out how to be sure i boto from cd.....i hear hit F12 from this guy, or change my bios, i just dont know how to do it, everyone says something different.
You have to get into your BIOS, at startup to change the sequence for bootup to look at your CD drive, first. I have no clue how to do it with a Dell, but you can put the CD in the drive, shut down, then when you power up, keep hitting the Delete key. Hopefully, you will get into your BIOS.
And, it looks like a malfunction with quotes on the forum.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
This message has been edited since posting. Last time this message was edited on 12. February 2007 @ 14:04
|
Member
|
13. February 2007 @ 03:47 |
Link to this message
|
|
SUCCESS!!!!!!
thank all of you guys for your help, i finally got it last nice easy as can be, went into bios, changed CD to boot first, then it would let me delete the partion fine. now i have a virgin computer!!!
it was a gift, but here is what it is....
900mhz AMD Athalon
30gb HDD
CDrw Drive
CD-rom Drive
128 RAM
floppy
it a large tower, so it has room for a total of 6 (yeah 6) cd-dvd drives.
now phase 2 issues......slightly blurry monitor, tried making all adjustments on the monitor, and to no avail. it seems slightly more blurry around the edges. could it be the monitor or the video card maybe or what?
|
AfterDawn Addict
|
13. February 2007 @ 04:48 |
Link to this message
|
Originally posted by hayden58:
SUCCESS!!!!!!
thank all of you guys for your help, i finally got it last nice easy as can be, went into bios, changed CD to boot first, then it would let me delete the partion fine. now i have a virgin computer!!!
it was a gift, but here is what it is....
900mhz AMD Athalon
30gb HDD
CDrw Drive
CD-rom Drive
128 RAM
floppy
it a large tower, so it has room for a total of 6 (yeah 6) cd-dvd drives.
now phase 2 issues......slightly blurry monitor, tried making all adjustments on the monitor, and to no avail. it seems slightly more blurry around the edges. could it be the monitor or the video card maybe or what?
You are welcome, and high fives to you! Update the drivers for your video card, then play around with the resolutions until you get the monitor to how you like it.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
Member
|
13. February 2007 @ 06:24 |
Link to this message
|
|
so you think its the video card drivers? any chance that the video card itself is bad? any chance the monitor is bad?
is there any way to tell what kind of RAM i have? without opening up the computer? i'm guessing its like PC100 or PC 133 based on the age of the computer, but i'm not sure.
|
AfterDawn Addict
|
13. February 2007 @ 07:26 |
Link to this message
|
Originally posted by hayden58:
so you think its the video card drivers? any chance that the video card itself is bad? any chance the monitor is bad?
is there any way to tell what kind of RAM i have? without opening up the computer? i'm guessing its like PC100 or PC 133 based on the age of the computer, but i'm not sure.
You could pull a stick, but I don't know how important that is to you.
As far as the video drivers go, yes, go to the manufacturer's website, download the latest drivers for that video card, and install them.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
Member
|
13. February 2007 @ 07:57 |
Link to this message
|
|
wow i would have never guessed it would be the drivers. now i assume ill have to open it up anyway to see what i have for a video card. thanks man. you've been a great help.
|
AfterDawn Addict
|
13. February 2007 @ 13:08 |
Link to this message
|
Originally posted by hayden58:
wow i would have never guessed it would be the drivers. now i assume ill have to open it up anyway to see what i have for a video card. thanks man. you've been a great help.
You are welcome. You can find what video card you have by going to Control Panel/System. Click on Hardware, then on Device Manager. Then click on the + sign in front of Display Adapter. You should see the name of your video card displayed.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
|
ddp
Moderator
|
13. February 2007 @ 13:54 |
Link to this message
|
|
i tend to think it is a monitor problem especially if slightly blurry. might be fixable if you can see any controlls at back of monitor. might have to open it to get at those controlls. ram is probably pc100 if not pc133
|
AfterDawn Addict
|
13. February 2007 @ 17:39 |
Link to this message
|
Originally posted by ddp:
i tend to think it is a monitor problem especially if slightly blurry. might be fixable if you can see any controlls at back of monitor. might have to open it to get at those controlls. ram is probably pc100 if not pc133
You may be right, but he should update the drivers for his video card, also. It beats running in VGA mode.
Life is good!
GrandpaBruce - Vietnam Vet - 1970 - 1971
Computer: Intel Core i7-920 Nehalim;Asus P6T Deluxe V2
|
|
Advertisement
|
|
|
Member
|
14. February 2007 @ 03:20 |
Link to this message
|
Quote:
Originally posted by hayden58:
wow i would have never guessed it would be the drivers. now i assume ill have to open it up anyway to see what i have for a video card. thanks man. you've been a great help.
You are welcome. You can find what video card you have by going to Control Panel/System. Click on Hardware, then on Device Manager. Then click on the + sign in front of Display Adapter. You should see the name of your video card displayed.
ill try that tonight, thanks. i hope its the drivers. if not then how can i tell if its the monitor or the video card? (i dont have 2 of either of those to test out.)
|
