|
|
|
nero burn process failed please help - log file posted-
|
|
|
just4all
Suspended due to non-functional email address
|
18. February 2007 @ 02:57 |
Link to this message
|
i get the burn process failed always whhen i try to burn anything to a CD or a DVD
here is the log from latest cd
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1
(Nero Express)
Recorder: <MATSHITA DVD-RAM UJ-841S>Version: 1.50 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA DVD-RAM UJ-841S >Version: 1.50 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080BH PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-841S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-841S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1021MB (1046508kB)
Free physical memory: 557MB (571368kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.2.2007
CD-ROM (ISO)
13:36:42 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
13:36:42 #2 Text 0 File Isodoc.cpp, Line 6527
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:36:42 #3 Text 0 File Burncd.cpp, Line 3163
MATSHITA DVD-RAM UJ-841S
SmoothLink activated
13:36:42 #4 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
13:36:42 #5 Text 0 File Burncd.cpp, Line 3465
Turn on Track-At-Once, using CD-R/RW media
13:36:42 #6 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 10920 ( 2:27.45)
13:36:42 #7 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
13:36:42 #8 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: MATSHITA DVD-RAM UJ-841S;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
13:36:42 #9 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:36:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 10921 (10921) = #10921/2:25.46
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 10919 blocks [E: MATSHITA DVD-RAM UJ-841S]
--------------------------------------------------------------
13:36:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: MATSHITA DVD-RAM UJ-841S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 22673408, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 10921 | -150 | 0x00
0 | 1 | 1 | 0x41 | 10921 | 0 | 0x00
10921 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
13:36:42 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1097
Removed 2 run-out blocks from end of track 1. Length: 10921 -> 10919.
13:36:42 #13 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
13:36:42 #14 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started
13:36:42 #15 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.
13:36:42 #16 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed
13:36:42 #17 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 4x (600 KB/s)
13:36:42 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:36:42 #19 Text 0 File MMC.cpp, Line 22250
Set BUFE: SmoothLink -> ON
13:36:50 #20 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 01 E0 00 00 20 00 00 00
Sense Area: 0xF1 00 03 FF FF FF 6A 0A 00 00 15 12 73 03
Buffer x070e0400: Len x10000
0xA7 6F 78 E1 7A EB 99 87 E5 5B 1F CE 96 E5 FC 2D
0x7F C4 9F 7A 5D CE 5C 9E CC 74 B4 B0 1C F5 DA 96
0x1D 8F AC 91 FC 03 D5 8F A5 6D E4 B7 29 20 5C 03
13:36:50 #21 CDR -1106 File Writer.cpp, Line 301
Power calibration error
E: MATSHITA DVD-RAM UJ-841S
13:36:50 #22 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
E: MATSHITA DVD-RAM UJ-841S
13:36:50 #23 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack
13:36:50 #24 Text 0 File MMC.cpp, Line 17028
<䅍協䥈䅔䐀䑖刭䵁噄ⵄ䅒⁍䩕㠭ㄴ⁓㔮0Ā> start Close Session
13:36:50 #25 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 15 12 73 03
13:36:50 #26 CDR -1106 File WriterStatus.cpp, Line 245
Power calibration error
E: MATSHITA DVD-RAM UJ-841S
13:36:50 #27 TRANSFER -19 File WriterStatus.cpp, Line 245
Could not perform Fixation
13:36:50 #28 Text 0 File WriterStatus.cpp, Line 254
falling back to disc fixation
13:36:50 #29 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 4x (600 KB/s)
13:36:50 #30 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
13:36:53 #31 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed
13:36:53 #32 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
my MATSHITA DVD-RAM UJ-841S reads dvds and cds fine but always fail to burn ,
your help would be apreciated
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
18. February 2007 @ 05:30 |
Link to this message
|
|
if it ALWAYS fails to burn then probably the burning laser is bad and drive needs to be replaced. Do you have another pc to put the drive in to check? A friend? Somebody?
|
|
laddyboy
AfterDawn Addict
|
18. February 2007 @ 05:54 |
Link to this message
|
|
Hi.
I'll just start out by stating that Matshita/Panasonic drives are crap for the most part. That said, the CD media you're using is not of very good quality and may be accounting for the power calibration errors. The same error can also be caused by out of date firmware and hardware failure.
I assume this laptop OEM burner came with the system, so you'll have to look for a firmware update on the computer vendor's support site.
Try using some different CD media. Try Verbatim.
I noticed a burn speed of 4X. Was this a CDRW disk or a CDR disk. I'm guessing CDRW given the slow speed. Try a CDR instead.
Have you tried burning a CD with WinXPs built in burner or any of the music services burners?
Can you burn DVDs?
|
|
just4all
Suspended due to non-functional email address
|
18. February 2007 @ 06:42 |
Link to this message
|
hey garmoon
after alot of testing and trying new softwares the Sonic recordnow works half of the times i mean when i burn the files to a CD it would stop and gives me a n error but then it asks if i wanted to burn the same project again and when i put a new blank cd it works
however Nero never complete the burning process
"Do you have another pc to put the drive in to check? A friend? Somebody?"
yea i have another pc but i dont know how to remove the drive from the notebook "Toshiba Satalite A100"
p.s i lost more than 20 new blank cds so am getting some re-writable 1ns
thanks anyway
|
|
just4all
Suspended due to non-functional email address
|
18. February 2007 @ 06:55 |
Link to this message
|
|
hey laddyboy
"I'll just start out by stating that Matshita/Panasonic drives are crap for the most part"
i agree
"I assume this laptop OEM burner came with the system, so you'll have to look for a firmware update on the computer vendor's support site"
no firmware or hardware update available
"Try using some different CD media. Try Verbatim"
am using Imation CDR i tried another cd media but it didnt workout
"I noticed a burn speed of 4X. Was this a CDRW disk or a CDR disk"
about burn speed i changed it was 24X but when that didnt work i started to lower it loosing a cd each time until i got to 4X the lowest speed
"Have you tried burning a CD with WinXPs built in burner or any of the music services burners?
Can you burn DVDs?"
yes and no
so thanks for taking the time
|
AfterDawn Addict
|
18. February 2007 @ 08:13 |
Link to this message
|
|
Glad you got it sorted. Notebooks are whole nother story.
|
|
Advertisement
|
|
|
|
laddyboy
AfterDawn Addict
|
18. February 2007 @ 09:43 |
Link to this message
|
|
|
|
