|
|
|
Lite-On DVDRW LH-20A1H with Nero Rebooting System
|
|
|
manhole1
Newbie
|
18. February 2007 @ 11:09 |
Link to this message
|
Hi folks,
I just installed a new Lite-On LH-20A1H and Nero 7.7.5.1. When burning a disc it is causing very big problems. The first disc got to 74% before the burn failed which then caused the system to freeze.
I thought it might be a Nero problem so I uninstalled, ran the clean tool along with a registry cleaner, and installed Nero 7.5.5.1. The next burn got to about 33% and then failed as well, and a few seconds after that the computer rebooted itself.
Anyone have any ideas? Did I get a defective burner?
|
|
Advertisement
|
 |
|
|
|
manhole1
Newbie
|
18. February 2007 @ 11:12 |
Link to this message
|
Correction - The second version of Nero that I installed is 7.5.7.0 (not 7.5.5.1).
|
Moderator
|
18. February 2007 @ 11:51 |
Link to this message
|
Hi manhole1
The pc rebooting could be caused by a few things. Heat can be one - inside of the case cleaned out recently?
Do a disc defrag very recently? If not do one of those.
Throw in cirus & spyware scans too.
When it rebooted - did you get the windows message something like system has recovered from a serious error? If you click on the more info link if you get it may have some info that can help.
Post the last Nero log too - just be sure to edit out the serial # - begin w/ 1A, 1C or 5C.
You can find them here: program files>nero>nero 7>core>nerohistory
|
|
manhole1
Newbie
|
18. February 2007 @ 12:13 |
Link to this message
|
Originally posted by binkie7:
Hi manhole1
The pc rebooting could be caused by a few things. Heat can be one - inside of the case cleaned out recently?
Do a disc defrag very recently? If not do one of those.
Throw in cirus & spyware scans too.
When it rebooted - did you get the windows message something like system has recovered from a serious error? If you click on the more info link if you get it may have some info that can help.
Post the last Nero log too - just be sure to edit out the serial # - begin w/ 1A, 1C or 5C.
You can find them here: program files>nero>nero 7>core>nerohistory
Hi binkie,
Thank you for taking the time to help me out. I recently upgraded a few items in my case including the burner, so it is definately clean inside. I also have lots of fans and monitor temperature levels, which are all ideal. Disc was defragged recently and I run SpySweeper & Antivirus software.
The one out of three time when the system actually rebooted itself it did come up with a serious error message, but I dismissed it. I had a third failure just a little while ago which just ejected and didn't cause the system to hang.
The three failed attempts I have had were using Philips DVD-R brand discs which always worked great with my Pioneer burner. I just burned a TDK DVD+R disc which did successfully complete. Could it be that the Lite-On just doesn't like the Philips discs (3 out of 3 failed)?
Below is my Nero log file of the three failed attempts. Thank you again for taking the time to look at this.
====== *** NeroAPI, History File *** ======
1C80-XXXX-XXXX-XXXX-XXXX-XXXX-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/20/2004 12:41:48 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.7.5.1
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 7, 5, 1
Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL06 - HA 1 TA 1 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD SHD-16P1S nvata Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1H nvata Port 0 ID 2 DMA: Off
DiskPeripheral : WDC WD740GD-00FLC0 nvata Port 1 ID 0 DMA: Off
DiskPeripheral : ST3320620AS nvata Port 1 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVD SHD-16P1S D: CDRom0
LITE-ON DVDRW LH-20A1H E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1396MB (1430188kB)
Memory in use : 31
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2007
NeroAPI
12:34:02 AM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
12:34:02 AM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
12:34:02 AM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
12:34:02 AM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:34:02 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
12:34:02 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
12:34:02 AM #7 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media
12:34:03 AM #8 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287023 (508:13.48, 4466MB)
12:34:03 AM #9 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
12:34:03 AM #10 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
12:34:03 AM #11 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:34:03 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287024 (2287024) = #2287024/508:13.49
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287024 blocks [E: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------
12:34:03 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [E: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683825152, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2287024 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2287024 | 0 | 0x00
2287024 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:34:03 AM #14 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:34:03 AM #15 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
12:34:03 AM #16 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.
12:34:03 AM #17 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
12:34:03 AM #18 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 8x (11,080 KB/s)
12:34:03 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:34:03 AM #20 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode
12:34:03 AM #21 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes
12:34:03 AM #22 Text 0 File Cdrdrv.cpp, Line 9285
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:34:36 AM #23 Text 0 File Cdrdrv.cpp, Line 1303
00:34:36.781 - E: LITE-ON DVDRW LH-20A1H : Queue again later
12:40:30 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 19 02 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x2a461040: Len x10000
0x00 00 01 BA 44 0F 16 D0 15 4F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 EB 01 2A 07 2C 41 D0 A2 2D
0x08 66 6A 34 43 11 67 39 C7 2E D6 F0 DD C9 5E 71
12:40:30 AM #25 CDR -1135 File Writer.cpp, Line 301
Write error
E: LITE-ON DVDRW LH-20A1H
12:40:30 AM #26 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was 1638911
12:40:30 AM #27 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 8x (11,080 KB/s)
12:40:30 AM #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:40:32 AM #29 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed
12:40:32 AM #30 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 1:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/20/2004 12:41:48 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 1/29/2007 9:03:34 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
1C80-XXXX-XXXX-XXXX-XXXX-XXXX-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/20/2004 12:41:48 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.5.7.0
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 5, 7, 0
Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL06 - HA 1 TA 1 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD SHD-16P1S nvata Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1H nvata Port 0 ID 2 DMA: Off
DiskPeripheral : WDC WD740GD-00FLC0 nvata Port 1 ID 0 DMA: Off
DiskPeripheral : ST3320620AS nvata Port 1 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVD SHD-16P1S D: CDRom0
LITE-ON DVDRW LH-20A1H E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1166MB (1194152kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2007
NeroAPI
12:53:18 PM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
12:53:18 PM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
12:53:18 PM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
12:53:18 PM #4 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:53:18 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
12:53:19 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
12:53:19 PM #7 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media
12:53:19 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287023 (508:13.48, 4466MB)
12:53:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD)
12:53:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
12:53:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:53:19 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287024 (2287024) = #2287024/508:13.49
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287024 blocks [Main]
--------------------------------------------------------------
12:53:19 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683825152, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2287024 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2287024 | 0 | 0x00
2287024 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:53:19 PM #14 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:53:19 PM #15 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
12:53:19 PM #16 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
12:53:19 PM #17 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
12:53:19 PM #18 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 8x (11,080 KB/s)
12:53:19 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:53:19 PM #20 Text 0 File DVDR.cpp, Line 3026
Recording mode: Sequential Recording Mode
12:53:19 PM #21 Text 0 File DVDR.cpp, Line 3182
Start write address at LBA 0
DVD high compatibility mode: Yes
12:53:19 PM #22 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:53:55 PM #23 Text 0 File Cdrdrv.cpp, Line 1290
12:53:55.656 - E: LITE-ON DVDRW LH-20A1H : Queue again later
12:56:59 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 293
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0A B6 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x10d3c200: Len x10000
0x00 00 01 BA 44 0B 4E 95 0D FB 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 27 64 15 C4 A1 80 06 30 60
0x03 FE C1 A4 CE 82 F8 0A 46 24 35 47 A9 83 A7 48
12:56:59 PM #25 CDR -1135 File Writer.cpp, Line 278
Write error
E: LITE-ON DVDRW LH-20A1H
12:56:59 PM #26 Text 0 File DVDR.cpp, Line 3402
EndDAO: Last written address was 702079
12:56:59 PM #27 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 8x (11,080 KB/s)
12:56:59 PM #28 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
12:56:59 PM #29 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 1:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/20/2004 12:41:48 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 1/29/2007 9:03:34 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
1C80-XXXX-XXXX-XXXX-XXXX-XXXX-****
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/20/2004 12:41:48 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.5.7.0
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Recode
Internal Version: 7, 5, 7, 0
Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL05 - HA 1 TA 3 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVD SHD-16P1S nvata Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1H nvata Port 0 ID 2 DMA: Off
DiskPeripheral : WDC WD740GD-00FLC0 nvata Port 1 ID 0 DMA: Off
DiskPeripheral : ST3320620AS nvata Port 1 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVD SHD-16P1S D: CDRom0
LITE-ON DVDRW LH-20A1H E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1217MB (1247032kB)
Memory in use : 40
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2007
NeroAPI
1:33:49 PM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started
1:33:49 PM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)
1:33:49 PM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted
1:33:49 PM #4 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1:33:49 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
1:33:49 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
1:33:49 PM #7 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media
1:33:49 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287007 (508:13.32, 4466MB)
1:33:49 PM #9 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD)
1:33:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
1:33:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:33:49 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287008 (2287008) = #2287008/508:13.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287008 blocks [Main]
--------------------------------------------------------------
1:33:50 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683792384, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2287008 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2287008 | 0 | 0x00
2287008 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1:33:50 PM #14 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:33:50 PM #15 Phase 24 File APIProgress.cpp, Line 282
Caching of files started
1:33:50 PM #16 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.
1:33:50 PM #17 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed
1:33:50 PM #18 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 8x (11,080 KB/s)
1:33:50 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:33:50 PM #20 Text 0 File DVDR.cpp, Line 3026
Recording mode: Sequential Recording Mode
1:33:50 PM #21 Text 0 File DVDR.cpp, Line 3182
Start write address at LBA 0
DVD high compatibility mode: Yes
1:33:50 PM #22 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:34:25 PM #23 Text 0 File Cdrdrv.cpp, Line 1290
13:34:25.250 - E: LITE-ON DVDRW LH-20A1H : Queue again later
1:36:46 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 293
E: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 09 01 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x097b0200: Len x10000
0x00 00 01 BA 44 0C 1D B3 44 7B 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 69 93 2F 1B BA 55 81 04 26
0xE8 FB F7 A2 C0 1D 68 83 CC 7D D2 E0 73 73 FB FA
1:36:46 PM #25 CDR -1135 File Writer.cpp, Line 278
Write error
E: LITE-ON DVDRW LH-20A1H
1:36:46 PM #26 Text 0 File DVDR.cpp, Line 3402
EndDAO: Last written address was 590111
1:36:46 PM #27 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 8x (11,080 KB/s)
1:36:46 PM #28 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed
1:36:46 PM #29 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 1:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/20/2004 12:41:48 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 1/29/2007 9:03:34 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
Moderator
|
18. February 2007 @ 15:19 |
Link to this message
|
Sounds like your running a clean pc there manhole1 - major plus.
Might want to run a registry cleaner too - could be a conflict and this may fix it but I having a feeling you're already a step ahead of me on that.
If you get the error warning again write down the error and we can go from there.
Yes it does look like the LiteOn doesn't like the Philips - they're made by CMC and are not very good. So might just be a media problem on the burn failures. Though this wouldn't cause the system to reboot.
TDK uses different manufacturers too. And sometimes CMC too. Pop one of the blanks in the drive. Go to Nero Tools>CD-DVD Speed>disc info tab. The manufacturer will be listed there.
Good media to use would be Taiyo Yuden, Verbatim, made in Japan Sony, Fuji or Maxell. You can get genuine Taiyo Yuden from a reputable online store.
All your drives are listed as having DMA off. But you have Nvidia so Nero doesn't report DMA mode correctly on these. From the log looks ok time wise but might just want to check in device manager to be sure.
File 'Drivers\CDRALW2K.SYS'
Nero and Roxio don't always play well together so another option is to uninstall Roxio and run the zap tool.
Oh and you're welcome!
|
|
manhole1
Newbie
|
18. February 2007 @ 16:16 |
Link to this message
|
Originally posted by binkie7:
Sounds like your running a clean pc there manhole1 - major plus.
Might want to run a registry cleaner too - could be a conflict and this may fix it but I having a feeling you're already a step ahead of me on that.
If you get the error warning again write down the error and we can go from there.
Yes it does look like the LiteOn doesn't like the Philips - they're made by CMC and are not very good. So might just be a media problem on the burn failures. Though this wouldn't cause the system to reboot.
TDK uses different manufacturers too. And sometimes CMC too. Pop one of the blanks in the drive. Go to Nero Tools>CD-DVD Speed>disc info tab. The manufacturer will be listed there.
Good media to use would be Taiyo Yuden, Verbatim, made in Japan Sony, Fuji or Maxell. You can get genuine Taiyo Yuden from a reputable online store.
All your drives are listed as having DMA off. But you have Nvidia so Nero doesn't report DMA mode correctly on these. From the log looks ok time wise but might just want to check in device manager to be sure.
File 'Drivers\CDRALW2K.SYS'
Nero and Roxio don't always play well together so another option is to uninstall Roxio and run the zap tool.
Oh and you're welcome!
I did actually run a registry cleaner, I forgot to mention that. I checked the manufacturer of both TDK and Philips discs and they are both made by CMC.
As far as 'Drivers\CDRALW2K.SYS', I've never ran Roxio on this system. Can this be from the built-in recording that Windows XP uses? Nevertheless I will be running the zap tool.
If anyone reading this has the same DVD recorder as me (LH-20A1H), I'd like to mail you a couple of the Philips blanks to see if they cause any problems on your setup.
Thanks again binkie!
|
Moderator
|
18. February 2007 @ 16:37 |
Link to this message
|
Not a problem manhole1
There are a few members here that have the model LiteOn - I just can't remember who.
Might want to post in this thread and see if you get a response on this model: link.
The Roxio driver comes with another program or 2 also. I think one is a version of WinAmp but not 100% sure. Pretty sure nothing to do with XP.
CMC does vary in quality so your best bet is to stick with the ones above. Much better & less of a headache :)
|
|
manhole1
Newbie
|
18. February 2007 @ 16:42 |
Link to this message
|
Originally posted by binkie7:
Not a problem manhole1
There are a few members here that have the model LiteOn - I just can't remember who.
Might want to post in this thread and see if you get a response on this model: link.
The Roxio driver comes with another program or 2 also. I think one is a version of WinAmp but not 100% sure. Pretty sure nothing to do with XP.
CMC does vary in quality so your best bet is to stick with the ones above. Much better & less of a headache :)
After I ran the zap tool and rebooted I got an error that popped up saying something about a Pinnacle driver error. Does Pinnacle product line maybe use Roxio drivers?
Nevertheless, I am attempting to burn to these Philips DVD-R discs once again to see if the error persists. If so I will be finding someone with the same drive to test these discs out.
I'll post my results as soon as Recode is finished with the disc.
|
Moderator
|
18. February 2007 @ 16:50 |
Link to this message
|
|
Pinnacle could be one that does.
If removing that driver didn't work then to get the driver back for Pinnacle - uninstall Pinnacle then reinstall - should be good again.
|
|
manhole1
Newbie
|
18. February 2007 @ 20:27 |
Link to this message
|
Seems to be working fine with the Philips DVD-R discs after running the Roxio zap tool. I'll post again after a few more burns.
|
|
Advertisement
|
|
|
Moderator
|
19. February 2007 @ 14:52 |
Link to this message
|
|
Good deal - hopefully all will be smooth now.
Let us know!
|
|
