|
|
|
Nero Keeps Freezing and Locking after 1%
|
|
|
shumway04
Newbie
|
24. February 2007 @ 11:35 |
Link to this message
|
Please somebody help me I am at my wits end. I keep trying to back up and burn my movies and I've always been successful at doing it however within the last 2 days I haven't been able to do so. Nero keep freezing at 1% then the system locks. Needless to say I've wasted at least 15-20 DISC. Please see below any insight would be greatly appreciated.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 127MB (130304kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
7:30:59 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
7:30:59 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
7:30:59 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
7:31:27 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285986 (507:59.61, 4464MB)
7:31:27 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
7:31:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
7:31:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
7:31:28 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285987 (2285987) = #2285987/507:59.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285987 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
7:31:28 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681701376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285987 | lead-out | 1 | 0x00 | 0x41
7:31:28 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
7:31:28 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
7:31:28 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
7:31:28 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
7:31:28 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:31:28 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,307 (216307ms) -> OK
7:31:28 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
7:31:28 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
7:31:28 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
7:31:28 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:31:47 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
19:31:47.406 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
7:37:25 PM #21 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H652D> start writing Lead-Out at LBA 2285987 (22E1A3h), lenght 0 blocks
7:37:25 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:37:25 PM #23 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 2285999
7:37:40 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:37:40 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:37:40 PM #26 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 114MB (117336kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
7:43:13 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
7:43:13 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
7:43:13 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
7:43:39 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285986 (507:59.61, 4464MB)
7:43:39 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
7:43:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
7:43:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
7:43:39 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285987 (2285987) = #2285987/507:59.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285987 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
7:43:39 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681701376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285987 | lead-out | 1 | 0x00 | 0x41
7:43:39 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
7:43:39 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
7:43:39 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
7:43:39 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
7:43:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:43:39 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,307 (216307ms) -> OK
7:43:39 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
7:43:39 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
7:43:39 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
7:43:39 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:43:58 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
19:43:58.609 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
7:44:09 PM #21 SCSI -1176 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06090000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x01
7:44:09 PM #22 CDR -1176 File Writer.cpp, Line 304
Session fixation error
7:44:09 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:44:09 PM #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
7:44:09 PM #25 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 447
7:44:09 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:44:09 PM #27 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
7:44:09 PM #28 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 121MB (123976kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
7:57:19 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
7:57:19 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
7:57:19 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
7:57:45 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285986 (507:59.61, 4464MB)
7:57:45 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
7:57:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
7:57:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
7:57:45 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285987 (2285987) = #2285987/507:59.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285987 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
7:57:45 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681701376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285987 | lead-out | 1 | 0x00 | 0x41
7:57:45 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
7:57:45 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
7:57:45 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
7:57:45 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
7:57:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:57:45 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,307 (216307ms) -> OK
7:57:45 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
7:57:45 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
7:57:45 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
7:57:45 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:58:04 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
19:58:04.265 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
7:59:52 PM #21 Phase 40 File dlgbrnst.cpp, Line 1540
Aborted by user
8:00:25 PM #22 SCSI -1176 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06090000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x01
8:00:25 PM #23 CDR -1176 File Writer.cpp, Line 304
Session fixation error
8:00:25 PM #24 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 447
8:00:25 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:00:25 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:00:25 PM #27 Phase 39 File dlgbrnst.cpp, Line 1845
Burn process aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 129MB (132488kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
8:00:59 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
8:00:59 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
8:00:59 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:01:29 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285986 (507:59.61, 4464MB)
8:01:29 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:01:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
8:01:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
8:01:29 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285987 (2285987) = #2285987/507:59.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285987 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
8:01:29 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681701376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285987 | lead-out | 1 | 0x00 | 0x41
8:01:29 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:01:29 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:01:29 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:01:29 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
8:01:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:01:29 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,307 (216307ms) -> OK
8:01:29 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
8:01:29 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
8:01:29 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
8:01:29 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:01:48 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
20:01:48.343 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
8:02:00 PM #21 SCSI -1176 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06090000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x01
8:02:00 PM #22 CDR -1176 File Writer.cpp, Line 304
Session fixation error
8:02:00 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:02:00 PM #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
8:02:00 PM #25 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 447
8:02:00 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:02:00 PM #27 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:02:00 PM #28 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 115MB (117912kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
8:02:23 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
8:02:23 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
8:02:23 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:02:45 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285986 (507:59.61, 4464MB)
8:02:45 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:02:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
8:02:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
8:02:45 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285987 (2285987) = #2285987/507:59.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285987 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
8:02:45 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681701376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285987 | lead-out | 1 | 0x00 | 0x41
8:02:45 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:02:45 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:02:45 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:02:45 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
8:02:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:02:45 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,307 (216307ms) -> OK
8:02:45 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
8:02:45 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
8:02:45 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
8:02:45 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:03:04 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
20:03:04.625 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
8:03:48 PM #21 Phase 40 File dlgbrnst.cpp, Line 1540
Aborted by user
8:04:36 PM #22 SCSI -1176 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06090000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x01
8:04:36 PM #23 CDR -1176 File Writer.cpp, Line 304
Session fixation error
8:04:36 PM #24 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 447
8:04:36 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:04:36 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:04:36 PM #27 Phase 39 File dlgbrnst.cpp, Line 1845
Burn process aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 128MB (131488kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
8:05:04 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
8:05:04 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
8:05:04 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:05:26 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285986 (507:59.61, 4464MB)
8:05:26 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:05:26 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
8:05:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
8:05:26 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285987 (2285987) = #2285987/507:59.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285987 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
8:05:26 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681701376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285987 | lead-out | 1 | 0x00 | 0x41
8:05:26 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:05:26 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:05:26 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:05:26 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
8:05:26 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:05:26 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,307 (216307ms) -> OK
8:05:26 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
8:05:26 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
8:05:26 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
8:05:26 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:05:45 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
20:05:45.546 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
8:11:24 PM #21 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H652D> start writing Lead-Out at LBA 2285987 (22E1A3h), lenght 0 blocks
8:11:24 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:11:24 PM #23 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 2285999
8:11:38 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:11:38 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:11:38 PM #26 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 115MB (117976kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
8:15:44 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
8:15:44 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
8:15:44 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:16:09 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286031 (508:00.31, 4464MB)
8:16:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:16:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
8:16:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
8:16:09 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286032 (2286032) = #2286032/508:0.32
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286032 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
8:16:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681793536, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286032 | lead-out | 1 | 0x00 | 0x41
8:16:10 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:16:10 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:16:10 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:16:10 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
8:16:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:16:10 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,311 (216311ms) -> OK
8:16:10 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
8:16:10 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
8:16:10 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
8:16:10 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:16:28 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
20:16:28.578 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
8:22:10 PM #21 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H652D> start writing Lead-Out at LBA 2286032 (22E1D0h), lenght 0 blocks
8:22:10 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:22:10 PM #23 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 2286031
8:22:23 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:22:23 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:22:23 PM #26 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 101MB (104280kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
8:24:32 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
8:24:32 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
8:24:32 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:24:58 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286113 (508:01.38, 4465MB)
8:24:58 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
8:24:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
8:24:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
8:24:58 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286114 (2286114) = #2286114/508:1.39
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286114 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
8:24:58 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681961472, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286114 | lead-out | 1 | 0x00 | 0x41
8:24:58 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:24:58 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:24:58 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:24:58 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
8:24:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:24:58 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,318 (216318ms) -> OK
8:24:58 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
8:24:58 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
8:24:58 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
8:24:58 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:25:17 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
20:25:17.828 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
8:30:56 PM #21 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H652D> start writing Lead-Out at LBA 2286114 (22E222h), lenght 0 blocks
8:30:56 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:30:57 PM #23 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 2286127
8:31:11 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:31:11 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:31:11 PM #26 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 121MB (124252kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.2.2007
Burn DVD Image
10:03:38 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
10:03:38 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
10:03:38 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
10:04:01 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286005 (508:00.05, 4464MB)
10:04:01 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
10:04:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
10:04:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
10:04:01 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286006 (2286006) = #2286006/508:0.6
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286006 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
10:04:01 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681740288, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286006 | lead-out | 1 | 0x00 | 0x41
10:04:02 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
10:04:02 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
10:04:02 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
10:04:02 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
10:04:02 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:04:02 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,308 (216308ms) -> OK
10:04:02 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
10:04:02 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
10:04:02 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
10:04:02 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:04:21 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
22:04:21.109 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
10:09:59 PM #21 Text 0 File WriterStatus.cpp, Line 115
<TSSTcorp CD/DVDW TS-H652D> start writing Lead-Out at LBA 2286006 (22E1B6h), lenght 0 blocks
10:09:59 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:09:59 PM #23 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 2286015
10:10:13 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
10:10:13 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
10:10:13 PM #26 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020K-0330-1726-8318-4416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <TSSTcorp CD/DVDW TS-H652D>Version: GA01 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2000BB-22RDA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H652D atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-H652 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391596kB)
Free physical memory: 117MB (120220kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.2.2007
Burn DVD Image
4:23:20 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
4:23:20 PM #2 Text 0 File Writer.cpp, Line 124
Writer TSSTcorp CD/DVDW TS-H652D running
4:23:20 PM #3 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
4:23:47 PM #4 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285992 (507:59.67, 4464MB)
4:23:47 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
4:23:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: TSSTcorp CD/DVDW TS-H652D, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
4:23:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
4:23:47 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285993 (2285993) = #2285993/507:59.68
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285993 blocks [TSSTcorp CD/DVDW TS-H652D]
--------------------------------------------------------------
4:23:47 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TSSTcorp CD/DVDW TS-H652D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681713664, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285993 | lead-out | 1 | 0x00 | 0x41
4:23:47 PM #10 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
4:23:47 PM #11 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
4:23:47 PM #12 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
4:23:47 PM #13 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
4:23:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:23:47 PM #15 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:36,307 (216307ms) -> OK
4:23:47 PM #16 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
4:23:47 PM #17 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON
4:23:47 PM #18 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
4:23:47 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:24:07 PM #20 Text 0 File Cdrdrv.cpp, Line 1294
16:24:07.390 - TSSTcorp CD/DVDW TS-H652D\H3 T0 : Queue again later
4:25:46 PM #21 Phase 40 File dlgbrnst.cpp, Line 1540
Aborted by user
4:26:07 PM #22 SCSI -1176 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x06090000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x01 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x01
4:26:07 PM #23 CDR -1176 File Writer.cpp, Line 304
Session fixation error
4:26:07 PM #24 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 447
4:26:07 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:26:07 PM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:26:07 PM #27 Phase 39 File dlgbrnst.cpp, Line 1845
Burn process aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 3:54:10 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Kia
|
AfterDawn Addict
|
24. February 2007 @ 13:13 |
Link to this message
|
Quote:
Nero version: 6.3.1.17
Your version of Nero is an old one, you may like to try for an update (both packages) from here
Package 1:
http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
Package 2:
http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe
Quote:
Physical memory : 382MB (391596kB)
Free physical memory: 127MB (130304kB)
Memory in use : 66 %
You will always experience problems burning DVDs, it's recommended to have a minimum of 512mb RAM, suggest adding more.
Quote:
Disc Manufacturer: CMC MA - G. AM3
These are horrible discs and cause a lot of failures, try Verbatim or Sony (made in japan)
Quote:
Burn process failed at 16x (22,160 KB/s)
Burning too fast, slow to 4X
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
You have posted several logs and your serial number is evident...edit it out in each log
|
AfterDawn Addict
|
24. February 2007 @ 13:27 |
Link to this message
|
Hi shumway04,
I kinda lost track but it looks like you posted 11 burn logs and each one has your Nero serial number. So delete all but the last log or at least delete your serial number from them.
It starts with 1A20
Each log starts/ends with this:
====== *** Nero-Burning Rom, History File *** ======
1A20-xxxx-xxxxx-xxxx-xxxx-xxxx
Gwen posted all the other stuff you need to do to fix your problems....
This message has been edited since posting. Last time this message was edited on 24. February 2007 @ 13:32
|
|
