|
|
|
Burning Failure...someone please help!
|
|
|
Fatsy
Newbie
|
25. February 2007 @ 18:17 |
Link to this message
|
Hi! I keep trying to copy Data DVDs that I've burned with Nero (so as to make a second copy for someone else). It keeps going right to the end and then suddenly fails (someone else on here had a similar problem with CDs. Anyway, I got this log below. Can someone tell me what it says and what I should do?
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < BDV316B >Version: H1.0 - HA 1 TA 1 - 6.3.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC AC11200L atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BDV316B atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N D: CDRom0
BDV316B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 510MB (522768kB)
Free physical memory: 229MB (234808kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.2.2007
DVD-Copy on the fly
9:18:56 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
9:18:56 PM #2 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-H10N running
9:18:56 PM #3 Text 0 File DVDCopy.cpp, Line 241
DVD Track-Information from source disc
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)
9:18:56 PM #4 Text 0 File DVDCopy.cpp, Line 334
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
9:18:56 PM #5 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media
9:18:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
9:18:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
9:18:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
9:18:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:18:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [HL-DT-ST DVDRAM GSA-H10N ]
--------------------------------------------------------------
9:18:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2295104 | lead-out | 1 | 0x00 | 0x41
9:18:57 PM #12 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)
9:18:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:18:57 PM #14 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 01 41 4D 4C 00 00 00 - 00 00 30 30 31 00 38 23 ..AML.....001.8#
54 37 13 02 4A 71 02 90 - 66 16 16 0B 0B 0A 0A 01 T7..Jq..f.......
1C 1E 0B 0C 12 12 01 00 - 00 00 00 00 00 00 00 01 ................
9:18:57 PM #15 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:20,913 (860913ms) -> OK
9:18:57 PM #16 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes
9:49:23 PM #17 SCSI -1047 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06B15000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x20 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00
9:49:54 PM #18 SCSI -1093 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06B15000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x01
CDB Data: 0x28 0x00 0x00 0x20 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x01
9:49:54 PM #19 TRANSFER -25 File Reader.cpp, Line 371
Error reading data
9:50:01 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:50:23 PM #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
9:50:23 PM #22 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
9:50:23 PM #23 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/3/2006 12:21:46 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 26. February 2007 @ 18:48
|
|
Advertisement
|
|
|
|
|
Saltgrass
Senior Member
|
25. February 2007 @ 18:33 |
Link to this message
|
You are doing "On the Fly" copying. After the option, it is explained that is fairly risky. Try duplicating without that option to see if it helps.
The DMA on the CD drive is turned off, have you tried to get it back on?
Looks like your media is not good quality--get some better stuff.
http://www.digitalfaq.com/media/dvdmedia.htm
Nero 7 v7.10.1.0
P4 2.4GHz 1 Gig RAM
NEC ND3550A DVD Burner
|
AfterDawn Addict
|
25. February 2007 @ 19:09 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 25. February 2007 @ 19:10
|
|
Fatsy
Newbie
|
25. February 2007 @ 19:59 |
Link to this message
|
Hi Saltgrass, I've gotten a message regarding the DMA and have tried to change it, but it just won't turn on. Can you give me a step by step way to do it for the benefit of us not so computer versed? Thanks so much.
Hi Gwendolyn, I had a newer version of Nero installed and then my friend suggested I try the older one (which is why I have it) just to see if it works better as the newer one was doing the same thing.
I wonder how I have ROXIO installed as I never installed it. The log says that?
|
|
Fatsy
Newbie
|
25. February 2007 @ 20:02 |
Link to this message
|
|
Also Saltgrass, I didn't see where it says "ON THE FLY" copying. Where is that option for me to check off? As you can see I'm totally inexperienced at this! Thanks so much for your help!
|
AfterDawn Addict
|
25. February 2007 @ 21:13 |
Link to this message
|
|
|
Saltgrass
Senior Member
|
26. February 2007 @ 02:32 |
Link to this message
|
|
When you do a Copy DVD compilation in NeroBurning ROM, on the New Compilation options, Copy Options tab, there is a check box for "Copy on the Fly". I believe this allows the data to be stored on the hard drive first as opposed to trying to write directly from the source to the target.
Nero 7 v7.10.1.0
P4 2.4GHz 1 Gig RAM
NEC ND3550A DVD Burner
This message has been edited since posting. Last time this message was edited on 26. February 2007 @ 02:33
|
|
Fatsy
Newbie
|
26. February 2007 @ 03:00 |
Link to this message
|
Hi Gwendolin! Thanks so much! Only my secondary driver was the one that had the "PIO" that your instructions talked about so I uninstalled that only.
I'm trying to download the Nero version you sent, but now it's asking me for a password. What should I do?
Saltgrass thanks so much to you too. I suppose if I download this other Nero I'll no longer see that option to "copy on the fly," correct?
|
AfterDawn Addict
|
26. February 2007 @ 11:04 |
Link to this message
|
|
Try using the serial number at the top of your log.
|
|
Fatsy
Newbie
|
26. February 2007 @ 15:14 |
Link to this message
|
Hi again, I tried all the suggestions you all gave me and they seem to do what you've predicted (except the "On the Fly" thing which I still haven't been able to find). Just tried copying another DVD (that I myself had made)and interestingly it's working much faster but it failed all the same and this is the log I once again got:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < BDV316B >Version: H1.0 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC AC11200L atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BDV316B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N D: CDRom0
BDV316B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522768kB)
Free physical memory: 116MB (119008kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.2.2007
DVD-Copy on the fly
7:31:25 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
7:31:25 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
7:31:25 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-ROM
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
7:31:25 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
7:31:25 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:31:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
7:31:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:31:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
7:31:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:31:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
7:31:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295104 | lead-out | 1 | 0x41 | 0x00
7:31:25 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (16,620 KB/s)
7:31:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:31:26 PM #14 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
7:31:26 PM #15 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVDRAM GSA-H10N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
7:31:26 PM #16 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
7:31:26 PM #17 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
7:41:18 PM #18 SCSI -1093 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x08A45000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x01
CDB Data: 0x28 0x00 0x00 0x20 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x01
7:41:18 PM #19 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
7:41:18 PM #20 Text 0 File Reader.cpp, Line 385
Exception value: -1093
7:41:23 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:41:44 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 12x (16,620 KB/s)
7:41:59 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x0E 0x29 0x00
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 26. February 2007 @ 18:49
|
AfterDawn Addict
|
26. February 2007 @ 17:49 |
Link to this message
|
Quote:
Burn process failed at 12x (16,620 KB/s)
You are using poor quality discs and are burning too fast, slow burn to 4X.
I use and recommend Verbatim or Sony (made in Japan)
|
|
Fatsy
Newbie
|
26. February 2007 @ 17:55 |
Link to this message
|
|
Hey Gwendolin, thanks again for your reply. I've actually been using TDK and Memorex, which I wouldn't have thought to be poor quality. I mean, they burn off my hard drive without a problem, they just seem to be unable to copy. I'll also try that 4x you're mentioning. Thanks so much again!
|
AfterDawn Addict
|
26. February 2007 @ 18:21 |
Link to this message
|
You should edit out your Nero serial number from your posts unless you want to give it away.
It's the long number at the top of your Nero log file:
A20-xxxx-xxxx-xxxx-xxxx-xxxx
Something else:
Quote:
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
You are burning way to close to the edge of the disc.
The problem is that when you wrote the original data DVDs they came out this size. Nero runs out of room so you get an error.
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x01
CDB Data: 0x28 0x00 0x00 0x20 0x8F 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x01
And then it stops copying your data because there is no place to put it:
Quote:
7:41:18 PM #19 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
My suggestion would be to copy the data from the disc to a folder and then copy the folder the way the original DVDs were copied.
This message has been edited since posting. Last time this message was edited on 26. February 2007 @ 18:58
|
|
Fatsy
Newbie
|
26. February 2007 @ 18:54 |
Link to this message
|
Hey Gwendolin, boy I tell you, I'm just blown away at how I just can't get to the bottom of this problem. I tried your suggestion to burn at 4x, which I did and it still didn't work. I'm going to try and call my driver's manufacturer tomorrow. See what they tell me.
Thanks for the tip, Fasfrank, I wouldn't have known as I"m not very computer savvy. There again, someone sent me this version of Nero so it's not like I obtained it on my own. I know what you mean by me burning up to the edge of the disk. This last time when I tried what Gwendolin suggested I burned up to 77% and then it suddenly said "error reading data" (which you will see at some point in the log below)and stopped. I tried to copy from a Memorex DVD to a TDK. I can see what Gwendolin's saying about cheaper DVD's, but would it really be THAT picky about the brand? Anyway here's my last log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < BDV316B >Version: H1.0 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST360020A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC AC11200L atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BDV316B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N D: CDRom0
BDV316B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522768kB)
Free physical memory: 173MB (177932kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.2.2007
DVD-Copy on the fly
11:22:42 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
11:22:42 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
11:22:42 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-ROM
S01 T01 Con 0x04 Start 0 Len 2295104 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
11:22:42 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 2295104 = 2295104, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
11:22:42 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:22:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2295103 (510:01.28, 4482MB)
11:22:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:22:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
11:22:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:22:42 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2295104 (2295104) = #2295104/510:1.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295104 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
11:22:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700372992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295104 | lead-out | 1 | 0x41 | 0x00
11:22:44 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
11:22:44 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:22:44 PM #14 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
11:22:44 PM #15 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVDRAM GSA-H10N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:22:44 PM #16 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
11:22:44 PM #17 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:43:12 PM #18 SCSI -1047 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A135000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x1A 0xFD 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00
11:43:12 PM #19 TRANSFER -25 File Reader.cpp, Line 382
Error reading data
11:43:12 PM #20 Text 0 File Reader.cpp, Line 385
Exception value: -1047
11:43:19 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:43:43 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 18, 0, size=99584 bytes, created 7/8/2005 5:17:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 18, 0, size=29696 bytes, created 7/8/2005 5:17:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 18, 0, size=8704 bytes, created 7/8/2005 5:17:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 26. February 2007 @ 18:56
|
|
Advertisement
|
|
|
AfterDawn Addict
|
26. February 2007 @ 19:13 |
Link to this message
|
I edited my previous post with a suggestion.
Take those Memorex DVDs and bury them somewhere. CMC MAGs are about as bad as you can get. It really does make a difference.
We consider 4464 Mb reasonable for good media, maybe even 4470. We would never recommend going right to the edge of the disc at 4482 Mb. And certainly not with CMC MAG junk. Nero has done that with your original data DVDs so I seriously doubt they can be copied disc to disc.
Like I mentioned previously, copy the data to a folder and then copy the data from the folder to DVD. You may be able to just copy/paste the data from the DVD and let Windows move it to the folder for you. Once you have the data in the folder make copies onto good DVD media.
You have InCD installed still. Try running the InCD CleanTool.
This message has been edited since posting. Last time this message was edited on 26. February 2007 @ 19:51
|
|
