|
|
|
illegal disk problem
|
|
|
Nirolo
Newbie
|
9. April 2007 @ 07:06 |
Link to this message
|
I have the smae problem like some of the guys here :
Krasi
1A23-0058-4010-2386-2165-3416
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16.12.2003 г. 20:18:06
Nero version: 6.3.1.17 (Nero Express)
Recorder: <SONY DVD RW DW-Q120A> Version: PYS3 - HA 0 TA 1 - 6.3.1.17
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <SONY DVD RW DW-Q120A >Version: PYS3 - HA 0 TA 1 - 6.3.1.17
Adapter driver: <nvatabus> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : ExcelStor Technology J8160 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-Q120A nvatabus Port 0 ID 1 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-Q120A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 65MB (67280kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.4.2007
ISO compilation
17:06:32 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
17:06:32 #2 Text 0 File Reader.cpp, Line 118
Reader running
17:06:32 #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DW-Q120A running
17:06:32 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
17:06:34 #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
17:06:34 #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1931807 (429:17.32, 3773MB)
17:06:34 #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
17:06:34 #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: SONY DVD RW DW-Q120A, Media type: DVD-R
Disc Manufacturer: Plasmo - n1A
Disc Application Code: 64, Disc Physical Code: 193
17:06:34 #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
17:06:34 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1931808 (1931808) = #1931808/429:17.33
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1931808 blocks [SONY DVD RW DW-Q120A ]
--------------------------------------------------------------
17:07:19 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DW-Q120A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3956342784, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1931808 | lead-out | 1 | 0x00 | 0x41
17:07:20 #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
17:07:20 #13 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
17:07:20 #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
17:07:20 #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 4x (5 540 KB/s)
17:07:20 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
17:07:21 #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 12:02,366 (722366ms) -> OK
17:07:21 #18 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode for Multisession
17:07:21 #19 Text 0 File Mmc.cpp, Line 20401
Set BUFE: Power-Burn -> ON , Generic write control : ON
17:07:21 #20 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes
17:07:21 #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
17:07:22 #22 SCSI -1046 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x02FD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
17:07:22 #23 CDR -1046 File Writer.cpp, Line 304
Illegal disc
17:07:22 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
17:07:22 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
17:07:23 #26 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was -1
17:07:23 #27 Phase 133 File dlgbrnst.cpp, Line 1845
Writing short lead-out
17:07:23 #28 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
17:07:28 #29 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
17:07:28 #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
17:07:28 #31 CDR -1046 File WriterStatus.cpp, Line 164
Illegal disc
SONY DVD RW DW-Q120A\H0 T1
17:07:28 #32 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
17:07:28 #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
17:07:28 #34 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 4x (5 540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25.8.2006 г. 06:47:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 26.10.2005 г. 23:12:48 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03.6.2004 г. 05:40:46 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
laddyboy
AfterDawn Addict
|
9. April 2007 @ 07:26 |
Link to this message
|
Hello.
Please edit your post and remove the Nero program serial number before the pirates have at it.
Quote:
Disc Manufacturer: Plasmo - n1A
I think this is very poor quaity media you're using. Stick to Verbatim, Taiyo Yuden, and Made in Japan labeled Fuji and Sony for the best results.
The Roxio CDRAL driver is installed which has been known to cause problems with some systems. In this case, it's likely the media causing the problem.
Quote:
Physical memory : 511MB (523760kB)
Free physical memory: 65MB (67280kB)
You don't have much of a memory cushion. Shutdown any unnecessary programs when burning.
|
AfterDawn Addict
|
9. April 2007 @ 07:40 |
Link to this message
|
first edit out your serial #.... use the edit icon found in the right hand corner of your reply on this page that looks like this: 
your serial # is on the top starting with 1A23.... take it out!
Quote:
Nero version: 6.3.1.17
your version of Nero 6 is not the stablest version.... 6.6.0.18 is the most stablest version of Nero 6 and I would update it to that version. Here's how:
Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html
then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot!
install package one:
http://www.filehippo.com/download_nero_burning_rom/?539
then install package two:
http://www.nero.com/nero6/eng/Patch_for_NVE3.html
reboot and you're good to go!
Quote:
DiskPeripheral : ExcelStor Technology J8160 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DW-Q120A nvatabus Port 0 ID 1 DMA: Off
Turn on your DMA.. otherwise you're doomed for failure. Here's how:
http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues
Quote:
Memory in use : 87 %
you are using too much memory..... 512K is the minimum amount of memory and you're using too much of it for Nero to be sucessful. Shut off all unnecessary programs that are running in the background, no internet while burning, no multi tasking while burning and it should be ok if you follow this
Quote:
Media type: DVD-R
Disc Manufacturer: Plasmo - n1A
this is crappy media! Use the good stuff and you won't have problems like this! Look on the label of the box or spindle and make sure it says MIJ (Made In Japan)! Taiyo Yuden, Sony, Maxell, Fuji.... MIJ! Using MIJs could solve many problem that come with crappy media! That's why you're getting: Illegal disc and this: Burn process failed at 4x (5 540 KB/s)
Quote:
Drivers\CDRALW2K.SYS
this is a Roxio/Sonic driver and if you are having problems with Nero then get rid of this because this drive is known to make problems for Nero! uninstall Roxio/Sonic and then use the Roxio Zapper to make sure there are no traces of Roxio/Sonic, found here:
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
after following all these suggestions you will find that Nero will work! good luck. and welcome to AfterDawn!
|
|
