|
|
|
nero 7 used read buffer
|
|
|
HaLisTiNe
Newbie
|
13. May 2007 @ 21:41 |
Link to this message
|
how's it goin? i haven't been to the forum in awhile and this is probably a redundant question but i can't seem to find it in the search.
i recently updated from Nero 6 to 7 and all seems to be well except one thing.
the used read buffer during the burning stages while using the burning rom part of the software.
when i used Nero 6 my entire used read buffer filled up and it burnt fine. now when using Nero 7 my used read buffer fills to about 40% then stays there and the process takes up to like 15 minutes [ vs. like 8 mins in the past @ 8x]
the dma is set on all drives [hd's and optical drives]
i 'm running 2g's of ram
i have a pent 4 3ghz processor
and the aspi layer is up to date [4.71]
i uninstalled the software and went back to Nero 6 and it worked fine like it used to. i then reinstalled Nero 7 and now back to slo burning and half filled used read buffers.
any suggestions or miracle fixes? i appreciate all whom read this post and try to help. thanx!
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
18. May 2007 @ 06:20 |
Link to this message
|
|
Firmware up to date?
|
|
HaLisTiNe
Newbie
|
18. May 2007 @ 09:59 |
Link to this message
|
man i went to Nero.com and they have clean packs for Nero 6 and 7. i apparently had a driver confliction or something because once i ran the cleaners i downloaded from Nero.com, i reinstalled Nero 7 and now the read buffer works great. thanx for the insight.
|
|
HaLisTiNe
Newbie
|
19. May 2007 @ 20:59 |
Link to this message
|
well i celebrated too soon. it started again. here's the log file of the suspect.........
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 1 - 7.8.5.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y160P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3320620A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-820A F: CDRom0
SCSIVAX DVD/CD-ROM H: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 2038MB (2087916kB)
Free physical memory: 1641MB (1681028kB)
Memory in use : 19 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.5.2007
UDF/ISO compilation
8:44:05 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
8:44:05 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
8:44:05 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 616
Content of VIDEO_TS.IFO has been modified
8:44:05 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 616
Content of VIDEO_TS.BUP has been modified
8:44:05 PM #5 Phase 113 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed
8:44:06 PM #6 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:44:06 PM #7 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
8:44:06 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
8:44:06 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
8:44:06 PM #10 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
8:44:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2197359 (488:18.09, 4291MB)
8:44:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
8:44:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: SONY DVD RW DRU-820A, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
8:44:06 PM #14 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:44:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2197360 (2197360) = #2197360/488:18.10
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2197360 blocks [F: SONY DVD RW DRU-820A]
--------------------------------------------------------------
8:44:06 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4500193280, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2197360 | 0 | 0x00
2197360 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
8:44:06 PM #17 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
8:44:06 PM #18 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
8:44:06 PM #19 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
8:44:06 PM #20 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
8:44:06 PM #21 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
8:44:06 PM #22 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
8:44:06 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:44:06 PM #24 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
8:44:06 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06be1040: Len x648
8:44:06 PM #26 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
8:44:06 PM #27 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
8:44:38 PM #28 Phase 40 File dlgbrnst.cpp, Line 1435
Aborted by user
8:44:57 PM #29 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 32
8:45:03 PM #30 Text 0 File DVDR.cpp, Line 7281
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD-ROM, direct update disc
Changing the Book Type was finished successfully, return code 0
8:45:03 PM #31 CDR -1207 File DVDR.cpp, Line 6356
Book Type automatically set to: DVD-ROM
8:45:03 PM #32 Phase 39 File dlgbrnst.cpp, Line 1762
Burn process aborted
8:45:03 PM #33 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
8:45:06 PM #34 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
8:45:06 PM #35 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i pasted in red the error i suspect.........if anyone can get anything out of this, i'd appreciate a response........thanx
|
AfterDawn Addict
|
19. May 2007 @ 23:42 |
Link to this message
|
14 minutes for a 4X burn, which is what your log shows you started the burn at, is normal. I wouldn't worry about the buffer level unless you see it go to zero.
The error you highlighted is something that a lot of people get, including me. It doesn't hurt the burn.
You are using DVD+RW rewritable media so just let the burn continue and see how it goes. If it does fail, you can always erase. I'd be interested in seeing a log from a failed burn, not a user aborted one.
If you can do a 4X burn on +RW media in 14-15 minutes then thats normal. Your Sony burner is rated for 8X burns on +RW media so I'd use 4X, which is what we would recommend anyhow... 1/2 the rated speed of the media, which is probably 8X.
I wouldn't be using +RW all the time though, just because it costs more than single write media.
This message has been edited since posting. Last time this message was edited on 19. May 2007 @ 23:45
|
AfterDawn Addict
|
20. May 2007 @ 02:31 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 20. May 2007 @ 11:34
|
|
HaLisTiNe
Newbie
|
20. May 2007 @ 18:31 |
Link to this message
|
nah man all me HD's are recently defragged and the reason it's showing DVD/RW is because that's what i started testing with after the problem began. if it can't fill the read buffer up and keep it full [80mb's] burning @2.4x or 4x something is definetly up. hate to say it but i switched back to nero6 [admitting defeat] for now because i just don't have the time to figure it out at the present. after switching back to 6 the read buffer stay's full maybe sometimes fluxuating between 98 and 100% but burns correctly like it used to before the Nero 7 installation. it even burns @ 8x from the HD that's on the same IDE strap and keeps the buffer full.
i have Nero 7 on another pc and it's buffer stays full..... i just dont' know. thanx tho
|
|
Advertisement
|
|
|
|
HaLisTiNe
Newbie
|
21. May 2007 @ 11:28 |
Link to this message
|
|
8:44:06 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x06be1040: Len x648
i looked up the key illegal request codes and found this
5 24 00 Illegal Request - invalid field in CDB (Command Descriptor Block)
|
|
